# create a compressed vmlinux image from the original vmlinux
#
-targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc_32.o piggy.o \
+targets := vmlinux vmlinux.bin vmlinux.bin.gz head_32.o misc_32.o piggy.o \
vmlinux.bin.all vmlinux.relocs
EXTRA_AFLAGS := -traditional
$(call cc-option,-fno-stack-protector)
LDFLAGS := -m elf_i386
-$(obj)/vmlinux: $(src)/vmlinux_32.lds $(obj)/head.o $(obj)/misc_32.o $(obj)/piggy.o FORCE
+$(obj)/vmlinux: $(src)/vmlinux_32.lds $(obj)/head_32.o $(obj)/misc_32.o $(obj)/piggy.o FORCE
$(call if_changed,ld)
@:
+++ /dev/null
-/*
- * linux/boot/head.S
- *
- * Copyright (C) 1991, 1992, 1993 Linus Torvalds
- */
-
-/*
- * head.S contains the 32-bit startup code.
- *
- * NOTE!!! Startup happens at absolute address 0x00001000, which is also where
- * the page directory will exist. The startup code will be overwritten by
- * the page directory. [According to comments etc elsewhere on a compressed
- * kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC]
- *
- * Page 0 is deliberately kept safe, since System Management Mode code in
- * laptops may need to access the BIOS data stored there. This is also
- * useful for future device drivers that either access the BIOS via VM86
- * mode.
- */
-
-/*
- * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
- */
-.text
-
-#include <linux/linkage.h>
-#include <asm/segment.h>
-#include <asm/page.h>
-#include <asm/boot.h>
-
-.section ".text.head","ax",@progbits
- .globl startup_32
-
-startup_32:
- cld
- cli
- movl $(__BOOT_DS),%eax
- movl %eax,%ds
- movl %eax,%es
- movl %eax,%fs
- movl %eax,%gs
- movl %eax,%ss
-
-/* Calculate the delta between where we were compiled to run
- * at and where we were actually loaded at. This can only be done
- * with a short local call on x86. Nothing else will tell us what
- * address we are running at. The reserved chunk of the real-mode
- * data at 0x1e4 (defined as a scratch field) are used as the stack
- * for this calculation. Only 4 bytes are needed.
- */
- leal (0x1e4+4)(%esi), %esp
- call 1f
-1: popl %ebp
- subl $1b, %ebp
-
-/* %ebp contains the address we are loaded at by the boot loader and %ebx
- * contains the address where we should move the kernel image temporarily
- * for safe in-place decompression.
- */
-
-#ifdef CONFIG_RELOCATABLE
- movl %ebp, %ebx
- addl $(CONFIG_PHYSICAL_ALIGN - 1), %ebx
- andl $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebx
-#else
- movl $LOAD_PHYSICAL_ADDR, %ebx
-#endif
-
- /* Replace the compressed data size with the uncompressed size */
- subl input_len(%ebp), %ebx
- movl output_len(%ebp), %eax
- addl %eax, %ebx
- /* Add 8 bytes for every 32K input block */
- shrl $12, %eax
- addl %eax, %ebx
- /* Add 32K + 18 bytes of extra slack */
- addl $(32768 + 18), %ebx
- /* Align on a 4K boundary */
- addl $4095, %ebx
- andl $~4095, %ebx
-
-/* Copy the compressed kernel to the end of our buffer
- * where decompression in place becomes safe.
- */
- pushl %esi
- leal _end(%ebp), %esi
- leal _end(%ebx), %edi
- movl $(_end - startup_32), %ecx
- std
- rep
- movsb
- cld
- popl %esi
-
-/* Compute the kernel start address.
- */
-#ifdef CONFIG_RELOCATABLE
- addl $(CONFIG_PHYSICAL_ALIGN - 1), %ebp
- andl $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebp
-#else
- movl $LOAD_PHYSICAL_ADDR, %ebp
-#endif
-
-/*
- * Jump to the relocated address.
- */
- leal relocated(%ebx), %eax
- jmp *%eax
-.section ".text"
-relocated:
-
-/*
- * Clear BSS
- */
- xorl %eax,%eax
- leal _edata(%ebx),%edi
- leal _end(%ebx), %ecx
- subl %edi,%ecx
- cld
- rep
- stosb
-
-/*
- * Setup the stack for the decompressor
- */
- leal stack_end(%ebx), %esp
-
-/*
- * Do the decompression, and jump to the new kernel..
- */
- movl output_len(%ebx), %eax
- pushl %eax
- pushl %ebp # output address
- movl input_len(%ebx), %eax
- pushl %eax # input_len
- leal input_data(%ebx), %eax
- pushl %eax # input_data
- leal _end(%ebx), %eax
- pushl %eax # end of the image as third argument
- pushl %esi # real mode pointer as second arg
- call decompress_kernel
- addl $20, %esp
- popl %ecx
-
-#if CONFIG_RELOCATABLE
-/* Find the address of the relocations.
- */
- movl %ebp, %edi
- addl %ecx, %edi
-
-/* Calculate the delta between where vmlinux was compiled to run
- * and where it was actually loaded.
- */
- movl %ebp, %ebx
- subl $LOAD_PHYSICAL_ADDR, %ebx
- jz 2f /* Nothing to be done if loaded at compiled addr. */
-/*
- * Process relocations.
- */
-
-1: subl $4, %edi
- movl 0(%edi), %ecx
- testl %ecx, %ecx
- jz 2f
- addl %ebx, -__PAGE_OFFSET(%ebx, %ecx)
- jmp 1b
-2:
-#endif
-
-/*
- * Jump to the decompressed kernel.
- */
- xorl %ebx,%ebx
- jmp *%ebp
-
-.bss
-.balign 4
-stack:
- .fill 4096, 1, 0
-stack_end:
--- /dev/null
+/*
+ * linux/boot/head.S
+ *
+ * Copyright (C) 1991, 1992, 1993 Linus Torvalds
+ */
+
+/*
+ * head.S contains the 32-bit startup code.
+ *
+ * NOTE!!! Startup happens at absolute address 0x00001000, which is also where
+ * the page directory will exist. The startup code will be overwritten by
+ * the page directory. [According to comments etc elsewhere on a compressed
+ * kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC]
+ *
+ * Page 0 is deliberately kept safe, since System Management Mode code in
+ * laptops may need to access the BIOS data stored there. This is also
+ * useful for future device drivers that either access the BIOS via VM86
+ * mode.
+ */
+
+/*
+ * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
+ */
+.text
+
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+#include <asm/boot.h>
+
+.section ".text.head","ax",@progbits
+ .globl startup_32
+
+startup_32:
+ cld
+ cli
+ movl $(__BOOT_DS),%eax
+ movl %eax,%ds
+ movl %eax,%es
+ movl %eax,%fs
+ movl %eax,%gs
+ movl %eax,%ss
+
+/* Calculate the delta between where we were compiled to run
+ * at and where we were actually loaded at. This can only be done
+ * with a short local call on x86. Nothing else will tell us what
+ * address we are running at. The reserved chunk of the real-mode
+ * data at 0x1e4 (defined as a scratch field) are used as the stack
+ * for this calculation. Only 4 bytes are needed.
+ */
+ leal (0x1e4+4)(%esi), %esp
+ call 1f
+1: popl %ebp
+ subl $1b, %ebp
+
+/* %ebp contains the address we are loaded at by the boot loader and %ebx
+ * contains the address where we should move the kernel image temporarily
+ * for safe in-place decompression.
+ */
+
+#ifdef CONFIG_RELOCATABLE
+ movl %ebp, %ebx
+ addl $(CONFIG_PHYSICAL_ALIGN - 1), %ebx
+ andl $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebx
+#else
+ movl $LOAD_PHYSICAL_ADDR, %ebx
+#endif
+
+ /* Replace the compressed data size with the uncompressed size */
+ subl input_len(%ebp), %ebx
+ movl output_len(%ebp), %eax
+ addl %eax, %ebx
+ /* Add 8 bytes for every 32K input block */
+ shrl $12, %eax
+ addl %eax, %ebx
+ /* Add 32K + 18 bytes of extra slack */
+ addl $(32768 + 18), %ebx
+ /* Align on a 4K boundary */
+ addl $4095, %ebx
+ andl $~4095, %ebx
+
+/* Copy the compressed kernel to the end of our buffer
+ * where decompression in place becomes safe.
+ */
+ pushl %esi
+ leal _end(%ebp), %esi
+ leal _end(%ebx), %edi
+ movl $(_end - startup_32), %ecx
+ std
+ rep
+ movsb
+ cld
+ popl %esi
+
+/* Compute the kernel start address.
+ */
+#ifdef CONFIG_RELOCATABLE
+ addl $(CONFIG_PHYSICAL_ALIGN - 1), %ebp
+ andl $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebp
+#else
+ movl $LOAD_PHYSICAL_ADDR, %ebp
+#endif
+
+/*
+ * Jump to the relocated address.
+ */
+ leal relocated(%ebx), %eax
+ jmp *%eax
+.section ".text"
+relocated:
+
+/*
+ * Clear BSS
+ */
+ xorl %eax,%eax
+ leal _edata(%ebx),%edi
+ leal _end(%ebx), %ecx
+ subl %edi,%ecx
+ cld
+ rep
+ stosb
+
+/*
+ * Setup the stack for the decompressor
+ */
+ leal stack_end(%ebx), %esp
+
+/*
+ * Do the decompression, and jump to the new kernel..
+ */
+ movl output_len(%ebx), %eax
+ pushl %eax
+ pushl %ebp # output address
+ movl input_len(%ebx), %eax
+ pushl %eax # input_len
+ leal input_data(%ebx), %eax
+ pushl %eax # input_data
+ leal _end(%ebx), %eax
+ pushl %eax # end of the image as third argument
+ pushl %esi # real mode pointer as second arg
+ call decompress_kernel
+ addl $20, %esp
+ popl %ecx
+
+#if CONFIG_RELOCATABLE
+/* Find the address of the relocations.
+ */
+ movl %ebp, %edi
+ addl %ecx, %edi
+
+/* Calculate the delta between where vmlinux was compiled to run
+ * and where it was actually loaded.
+ */
+ movl %ebp, %ebx
+ subl $LOAD_PHYSICAL_ADDR, %ebx
+ jz 2f /* Nothing to be done if loaded at compiled addr. */
+/*
+ * Process relocations.
+ */
+
+1: subl $4, %edi
+ movl 0(%edi), %ecx
+ testl %ecx, %ecx
+ jz 2f
+ addl %ebx, -__PAGE_OFFSET(%ebx, %ecx)
+ jmp 1b
+2:
+#endif
+
+/*
+ * Jump to the decompressed kernel.
+ */
+ xorl %ebx,%ebx
+ jmp *%ebp
+
+.bss
+.balign 4
+stack:
+ .fill 4096, 1, 0
+stack_end:
projects / GitHub / LineageOS / android_kernel_samsung_universal7580.git / commitdiff