ARM: dt: tegra: cardhu: add entry for PMIC TPS65911.

Tegra30 based platform "cardhu" have the power management
IC TPS65911 for the regulator.
Adding DT entry for this device.
Data are chosen from downstream kernel and making the
voltage output as require by default for device to
operate.
The default interrupt line is HIGH from PMIC device and so
inverting the interrupt detection line of PMU interrupt
through configuring PMC.
In this patch, do not registering LDO5 because the input
supply for this rail is different for different version of
cardhu i..e A02 and A04. The registration will be done once
the dts file for cardhu A02 and A04 are added in follow on
patches.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

diff --git a/arch/arm/boot/dts/tegra30-cardhu.dts b/arch/arm/boot/dts/tegra30-cardhu.dts
index c169bced131e32038f4523f599c054b22690bdb6..6f9daaead5f90a7355d6e1fadc0baf6f2c5f6a4a 100644 (file)
--- a/arch/arm/boot/dts/tegra30-cardhu.dts
+++ b/arch/arm/boot/dts/tegra30-cardhu.dts
@@ -126,6 +126,120 @@
                        ti,vsel0-state-high;
                        ti,vsel1-state-high;
                };
+
+               pmic: tps65911@2d {
+                       compatible = "ti,tps65911";
+                       reg = <0x2d>;
+
+                       interrupts = <0 86 0x4>;
+                       #interrupt-cells = <2>;
+                       interrupt-controller;
+
+                       #gpio-cells = <2>;
+                       gpio-controller;
+
+                       vcc1-supply = <&vdd_ac_bat_reg>;
+                       vcc2-supply = <&vdd_ac_bat_reg>;
+                       vcc3-supply = <&vio_reg>;
+                       vcc5-supply = <&vdd_ac_bat_reg>;
+                       vcc6-supply = <&vdd2_reg>;
+                       vcc7-supply = <&vdd_ac_bat_reg>;
+                       vccio-supply = <&vdd_ac_bat_reg>;
+
+                       regulators {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               vdd1_reg: regulator@0 {
+                                       reg = <0>;
+                                       regulator-compatible = "vdd1";
+                                       regulator-name = "vddio_ddr_1v2";
+                                       regulator-min-microvolt = <1200000>;
+                                       regulator-max-microvolt = <1200000>;
+                                       regulator-always-on;
+                               };
+
+                               vdd2_reg: regulator@1 {
+                                       reg = <1>;
+                                       regulator-compatible = "vdd2";
+                                       regulator-name = "vdd_1v5_gen";
+                                       regulator-min-microvolt = <1500000>;
+                                       regulator-max-microvolt = <1500000>;
+                                       regulator-always-on;
+                               };
+
+                               vddctrl_reg: regulator@2 {
+                                       reg = <2>;
+                                       regulator-compatible = "vddctrl";
+                                       regulator-name = "vdd_cpu,vdd_sys";
+                                       regulator-min-microvolt = <1000000>;
+                                       regulator-max-microvolt = <1000000>;
+                                       regulator-always-on;
+                               };
+
+                               vio_reg: regulator@3 {
+                                       reg = <3>;
+                                       regulator-compatible = "vio";
+                                       regulator-name = "vdd_1v8_gen";
+                                       regulator-min-microvolt = <1800000>;
+                                       regulator-max-microvolt = <1800000>;
+                                       regulator-always-on;
+                               };
+
+                               ldo1_reg: regulator@4 {
+                                       reg = <4>;
+                                       regulator-compatible = "ldo1";
+                                       regulator-name = "vdd_pexa,vdd_pexb";
+                                       regulator-min-microvolt = <1050000>;
+                                       regulator-max-microvolt = <1050000>;
+                               };
+
+                               ldo2_reg: regulator@5 {
+                                       reg = <5>;
+                                       regulator-compatible = "ldo2";
+                                       regulator-name = "vdd_sata,avdd_plle";
+                                       regulator-min-microvolt = <1050000>;
+                                       regulator-max-microvolt = <1050000>;
+                               };
+
+                               /* LDO3 is not connected to anything */
+
+                               ldo4_reg: regulator@7 {
+                                       reg = <7>;
+                                       regulator-compatible = "ldo4";
+                                       regulator-name = "vdd_rtc";
+                                       regulator-min-microvolt = <1200000>;
+                                       regulator-max-microvolt = <1200000>;
+                                       regulator-always-on;
+                               };
+
+                               ldo6_reg: regulator@9 {
+                                       reg = <9>;
+                                       regulator-compatible = "ldo6";
+                                       regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+                                       regulator-min-microvolt = <1200000>;
+                                       regulator-max-microvolt = <1200000>;
+                               };
+
+                               ldo7_reg: regulator@10 {
+                                       reg = <10>;
+                                       regulator-compatible = "ldo7";
+                                       regulator-name = "vdd_pllm,x,u,a_p_c_s";
+                                       regulator-min-microvolt = <1200000>;
+                                       regulator-max-microvolt = <1200000>;
+                                       regulator-always-on;
+                               };
+
+                               ldo8_reg: regulator@11 {
+                                       reg = <11>;
+                                       regulator-compatible = "ldo8";
+                                       regulator-name = "vdd_ddr_hs";
+                                       regulator-min-microvolt = <1000000>;
+                                       regulator-max-microvolt = <1000000>;
+                                       regulator-always-on;
+                               };
+                       };
+               };
        };
 
        ahub {
@@ -134,6 +248,11 @@
                };
        };
 
+       pmc {
+               status = "okay";
+               nvidia,invert-interrupt;
+       };
+
        sdhci@78000000 {
                status = "okay";
                cd-gpios = <&gpio 69 0>; /* gpio PI5 */
@@ -147,6 +266,21 @@
                bus-width = <8>;
        };
 
+       regulators {
+               compatible = "simple-bus";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               vdd_ac_bat_reg: regulator@0 {
+                       compatible = "regulator-fixed";
+                       reg = <0>;
+                       regulator-name = "vdd_ac_bat";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       regulator-always-on;
+               };
+       };
+
        sound {
                compatible = "nvidia,tegra-audio-wm8903-cardhu",
                             "nvidia,tegra-audio-wm8903";