[PATCH] sgiioc4: fixup use of mmio ops
authorJohn Keller <jpk@sgi.com>
Fri, 1 Sep 2006 04:27:51 +0000 (21:27 -0700)
committerLinus Torvalds <torvalds@g5.osdl.org>
Fri, 1 Sep 2006 18:39:10 +0000 (11:39 -0700)
Fix some bugs in the patch that converted the IOC4 driver from port IO ops to
memio ops.

http://marc.theaimsgroup.com/?l=linux-ide&m=114895892231438&w=2

  Problems fixed are:
   - Call to default_hwif_mmiops() was not being done until _after_
     first IO operation, resulting in the first IO operation being
     done as a port IO op, instead of memio.
   - request_region() calls needed to be request_mem_region()
   - Incomplete error case handling.
   - Non-usage of ioremap() and __iomem.

Signed-off-by: John Keller <jpk@sgi.com>
Signed-off-by: Jeremy Higdon <jeremy@sgi.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
drivers/ide/pci/sgiioc4.c

index e125032bb4031d1490d924caa546dd36a925ed08..d8a0d87df734bb22f383b540b5291991ffef99fa 100644 (file)
@@ -367,12 +367,13 @@ sgiioc4_INB(unsigned long port)
 static void __devinit
 ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base)
 {
+       void __iomem *virt_dma_base;
        int num_ports = sizeof (ioc4_dma_regs_t);
 
        printk(KERN_INFO "%s: BM-DMA at 0x%04lx-0x%04lx\n", hwif->name,
               dma_base, dma_base + num_ports - 1);
 
-       if (!request_region(dma_base, num_ports, hwif->name)) {
+       if (!request_mem_region(dma_base, num_ports, hwif->name)) {
                printk(KERN_ERR
                       "%s(%s) -- ERROR, Addresses 0x%p to 0x%p "
                       "ALREADY in use\n",
@@ -381,13 +382,21 @@ ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base)
                goto dma_alloc_failure;
        }
 
-       hwif->dma_base = dma_base;
+       virt_dma_base = ioremap(dma_base, num_ports);
+       if (virt_dma_base == NULL) {
+               printk(KERN_ERR
+                      "%s(%s) -- ERROR, Unable to map addresses 0x%lx to 0x%lx\n",
+                      __FUNCTION__, hwif->name, dma_base, dma_base + num_ports - 1);
+               goto dma_remap_failure;
+       }
+       hwif->dma_base = (unsigned long) virt_dma_base;
+
        hwif->dmatable_cpu = pci_alloc_consistent(hwif->pci_dev,
                                          IOC4_PRD_ENTRIES * IOC4_PRD_BYTES,
                                          &hwif->dmatable_dma);
 
        if (!hwif->dmatable_cpu)
-               goto dma_alloc_failure;
+               goto dma_pci_alloc_failure;
 
        hwif->sg_max_nents = IOC4_PRD_ENTRIES;
 
@@ -411,6 +420,12 @@ dma_base2alloc_failure:
        printk(KERN_INFO
               "Changing from DMA to PIO mode for Drive %s\n", hwif->name);
 
+dma_pci_alloc_failure:
+       iounmap(virt_dma_base);
+
+dma_remap_failure:
+       release_mem_region(dma_base, num_ports);
+
 dma_alloc_failure:
        /* Disable DMA because we couldnot allocate any DMA maps */
        hwif->autodma = 0;
@@ -607,18 +622,15 @@ ide_init_sgiioc4(ide_hwif_t * hwif)
        hwif->ide_dma_lostirq = &sgiioc4_ide_dma_lostirq;
        hwif->ide_dma_timeout = &__ide_dma_timeout;
 
-       /*
-        * The IOC4 uses MMIO rather than Port IO.
-        * It also needs special workarounds for INB.
-        */
-       default_hwif_mmiops(hwif);
        hwif->INB = &sgiioc4_INB;
 }
 
 static int __devinit
 sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d)
 {
-       unsigned long base, ctl, dma_base, irqport;
+       unsigned long cmd_base, dma_base, irqport;
+       unsigned long bar0, cmd_phys_base, ctl;
+       void __iomem *virt_base;
        ide_hwif_t *hwif;
        int h;
 
@@ -636,23 +648,32 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d)
        }
 
        /*  Get the CmdBlk and CtrlBlk Base Registers */
-       base = pci_resource_start(dev, 0) + IOC4_CMD_OFFSET;
-       ctl = pci_resource_start(dev, 0) + IOC4_CTRL_OFFSET;
-       irqport = pci_resource_start(dev, 0) + IOC4_INTR_OFFSET;
+       bar0 = pci_resource_start(dev, 0);
+       virt_base = ioremap(bar0, pci_resource_len(dev, 0));
+       if (virt_base == NULL) {
+               printk(KERN_ERR "%s: Unable to remap BAR 0 address: 0x%lx\n",
+                       d->name, bar0);
+               return -ENOMEM;
+       }
+       cmd_base = (unsigned long) virt_base + IOC4_CMD_OFFSET;
+       ctl = (unsigned long) virt_base + IOC4_CTRL_OFFSET;
+       irqport = (unsigned long) virt_base + IOC4_INTR_OFFSET;
        dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET;
 
-       if (!request_region(base, IOC4_CMD_CTL_BLK_SIZE, hwif->name)) {
+       cmd_phys_base = bar0 + IOC4_CMD_OFFSET;
+       if (!request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
+           hwif->name)) {
                printk(KERN_ERR
-                       "%s : %s -- ERROR, Port Addresses "
+                       "%s : %s -- ERROR, Addresses "
                        "0x%p to 0x%p ALREADY in use\n",
-                      __FUNCTION__, hwif->name, (void *) base,
-                      (void *) base + IOC4_CMD_CTL_BLK_SIZE);
+                      __FUNCTION__, hwif->name, (void *) cmd_phys_base,
+                      (void *) cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE);
                return -ENOMEM;
        }
 
-       if (hwif->io_ports[IDE_DATA_OFFSET] != base) {
+       if (hwif->io_ports[IDE_DATA_OFFSET] != cmd_base) {
                /* Initialize the IO registers */
-               sgiioc4_init_hwif_ports(&hwif->hw, base, ctl, irqport);
+               sgiioc4_init_hwif_ports(&hwif->hw, cmd_base, ctl, irqport);
                memcpy(hwif->io_ports, hwif->hw.io_ports,
                       sizeof (hwif->io_ports));
                hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET];
@@ -665,6 +686,9 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d)
        hwif->cds = (struct ide_pci_device_s *) d;
        hwif->gendev.parent = &dev->dev;/* setup proper ancestral information */
 
+       /* The IOC4 uses MMIO rather than Port IO. */
+       default_hwif_mmiops(hwif);
+
        /* Initializing chipset IRQ Registers */
        hwif->OUTL(0x03, irqport + IOC4_INTR_SET * 4);