[PATCH] sk98lin: error handling on probe

The sk98lin driver doesn't do proper error number handling
during initialization. Note: -EAGAIN is a bogus return value for
hardware errors.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c
index 9f89c23191d09153eaa7ff58473aee07e8f70612..455417d5fcfb99762e97215f3cd3353694d8972a 100644 (file)
--- a/drivers/net/sk98lin/skge.c
+++ b/drivers/net/sk98lin/skge.c
@@ -530,7 +530,7 @@ SK_BOOL     DualNet;
        if (SkGeInit(pAC, pAC->IoBase, SK_INIT_DATA) != 0) {
                printk("HWInit (0) failed.\n");
                spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
-               return(-EAGAIN);
+               return -EIO;
        }
        SkI2cInit(  pAC, pAC->IoBase, SK_INIT_DATA);
        SkEventInit(pAC, pAC->IoBase, SK_INIT_DATA);
@@ -552,7 +552,7 @@ SK_BOOL     DualNet;
        if (SkGeInit(pAC, pAC->IoBase, SK_INIT_IO) != 0) {
                printk("sk98lin: HWInit (1) failed.\n");
                spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
-               return(-EAGAIN);
+               return -EIO;
        }
        SkI2cInit(  pAC, pAC->IoBase, SK_INIT_IO);
        SkEventInit(pAC, pAC->IoBase, SK_INIT_IO);
@@ -584,20 +584,20 @@ SK_BOOL   DualNet;
        } else {
                printk(KERN_WARNING "sk98lin: Illegal number of ports: %d\n",
                       pAC->GIni.GIMacsFound);
-               return -EAGAIN;
+               return -EIO;
        }
 
        if (Ret) {
                printk(KERN_WARNING "sk98lin: Requested IRQ %d is busy.\n",
                       dev->irq);
-               return -EAGAIN;
+               return Ret;
        }
        pAC->AllocFlag |= SK_ALLOC_IRQ;
 
        /* Alloc memory for this board (Mem for RxD/TxD) : */
        if(!BoardAllocMem(pAC)) {
                printk("No memory for descriptor rings.\n");
-                       return(-EAGAIN);
+               return -ENOMEM;
        }
 
        BoardInitMem(pAC);
@@ -613,7 +613,7 @@ SK_BOOL     DualNet;
                DualNet)) {
                BoardFreeMem(pAC);
                printk("sk98lin: SkGeInitAssignRamToQueues failed.\n");
-               return(-EAGAIN);
+               return -EIO;
        }
 
        return (0);
@@ -4800,8 +4800,10 @@ static int __devinit skge_probe_one(struct pci_dev *pdev,
                }
        }
 
-       if ((dev = alloc_etherdev(sizeof(DEV_NET))) == NULL) {
-               printk(KERN_ERR "Unable to allocate etherdev "
+       error = -ENOMEM;
+       dev = alloc_etherdev(sizeof(DEV_NET));
+       if (!dev) {
+               printk(KERN_ERR "sk98lin: unable to allocate etherdev "
                       "structure!\n");
                goto out_disable_device;
        }
@@ -4809,7 +4811,7 @@ static int __devinit skge_probe_one(struct pci_dev *pdev,
        pNet = netdev_priv(dev);
        pNet->pAC = kzalloc(sizeof(SK_AC), GFP_KERNEL);
        if (!pNet->pAC) {
-               printk(KERN_ERR "Unable to allocate adapter "
+               printk(KERN_ERR "sk98lin: unable to allocate adapter "
                       "structure!\n");
                goto out_free_netdev;
        }
@@ -4822,6 +4824,7 @@ static int __devinit skge_probe_one(struct pci_dev *pdev,
        pAC->CheckQueue = SK_FALSE;
 
        dev->irq = pdev->irq;
+
        error = SkGeInitPCI(pAC);
        if (error) {
                printk(KERN_ERR "sk98lin: PCI setup failed: %i\n", error);
@@ -4861,17 +4864,20 @@ static int __devinit skge_probe_one(struct pci_dev *pdev,
 
        pAC->Index = boards_found++;
 
-       if (SkGeBoardInit(dev, pAC))
+       error = SkGeBoardInit(dev, pAC);
+       if (error)
                goto out_free_netdev;
 
        /* Read Adapter name from VPD */
        if (ProductStr(pAC, DeviceStr, sizeof(DeviceStr)) != 0) {
+               error = -EIO;
                printk(KERN_ERR "sk98lin: Could not read VPD data.\n");
                goto out_free_resources;
        }
 
        /* Register net device */
-       if (register_netdev(dev)) {
+       error = register_netdev(dev);
+       if (error) {
                printk(KERN_ERR "sk98lin: Could not register device.\n");
                goto out_free_resources;
        }