--- /dev/null
+/*
+ * Driver for CSR SiRFprimaII onboard UARTs.
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/sysrq.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+#include <linux/pinctrl/pinmux.h>
+
+#include "sirfsoc_uart.h"
+
+static unsigned int
+sirfsoc_uart_pio_tx_chars(struct sirfsoc_uart_port *sirfport, int count);
+static unsigned int
+sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count);
+static struct uart_driver sirfsoc_uart_drv;
+
+static const struct sirfsoc_baudrate_to_regv baudrate_to_regv[] = {
+ {4000000, 2359296},
+ {3500000, 1310721},
+ {3000000, 1572865},
+ {2500000, 1245186},
+ {2000000, 1572866},
+ {1500000, 1245188},
+ {1152000, 1638404},
+ {1000000, 1572869},
+ {921600, 1114120},
+ {576000, 1245196},
+ {500000, 1245198},
+ {460800, 1572876},
+ {230400, 1310750},
+ {115200, 1310781},
+ {57600, 1310843},
+ {38400, 1114328},
+ {19200, 1114545},
+ {9600, 1114979},
+};
+
+static struct sirfsoc_uart_port sirfsoc_uart_ports[SIRFSOC_UART_NR] = {
+ [0] = {
+ .port = {
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ },
+ [1] = {
+ .port = {
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF,
+ .line = 1,
+ },
+ },
+ [2] = {
+ .port = {
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF,
+ .line = 2,
+ },
+ },
+};
+
+static inline struct sirfsoc_uart_port *to_sirfport(struct uart_port *port)
+{
+ return container_of(port, struct sirfsoc_uart_port, port);
+}
+
+static inline unsigned int sirfsoc_uart_tx_empty(struct uart_port *port)
+{
+ unsigned long reg;
+ reg = rd_regl(port, SIRFUART_TX_FIFO_STATUS);
+ if (reg & SIRFUART_FIFOEMPTY_MASK(port))
+ return TIOCSER_TEMT;
+ else
+ return 0;
+}
+
+static unsigned int sirfsoc_uart_get_mctrl(struct uart_port *port)
+{
+ struct sirfsoc_uart_port *sirfport = to_sirfport(port);
+ if (!(sirfport->ms_enabled)) {
+ goto cts_asserted;
+ } else if (sirfport->hw_flow_ctrl) {
+ if (!(rd_regl(port, SIRFUART_AFC_CTRL) &
+ SIRFUART_CTS_IN_STATUS))
+ goto cts_asserted;
+ else
+ goto cts_deasserted;
+ }
+cts_deasserted:
+ return TIOCM_CAR | TIOCM_DSR;
+cts_asserted:
+ return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+}
+
+static void sirfsoc_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct sirfsoc_uart_port *sirfport = to_sirfport(port);
+ unsigned int assert = mctrl & TIOCM_RTS;
+ unsigned int val = assert ? SIRFUART_AFC_CTRL_RX_THD : 0x0;
+ unsigned int current_val;
+ if (sirfport->hw_flow_ctrl) {
+ current_val = rd_regl(port, SIRFUART_AFC_CTRL) & ~0xFF;
+ val |= current_val;
+ wr_regl(port, SIRFUART_AFC_CTRL, val);
+ }
+}
+
+static void sirfsoc_uart_stop_tx(struct uart_port *port)
+{
+ unsigned int regv;
+ regv = rd_regl(port, SIRFUART_INT_EN);
+ wr_regl(port, SIRFUART_INT_EN, regv & ~SIRFUART_TX_INT_EN);
+}
+
+void sirfsoc_uart_start_tx(struct uart_port *port)
+{
+ struct sirfsoc_uart_port *sirfport = to_sirfport(port);
+ unsigned long regv;
+ sirfsoc_uart_pio_tx_chars(sirfport, 1);
+ wr_regl(port, SIRFUART_TX_FIFO_OP, SIRFUART_TX_FIFO_START);
+ regv = rd_regl(port, SIRFUART_INT_EN);
+ wr_regl(port, SIRFUART_INT_EN, regv | SIRFUART_TX_INT_EN);
+}
+
+static void sirfsoc_uart_stop_rx(struct uart_port *port)
+{
+ unsigned long regv;
+ wr_regl(port, SIRFUART_RX_FIFO_OP, 0);
+ regv = rd_regl(port, SIRFUART_INT_EN);
+ wr_regl(port, SIRFUART_INT_EN, regv & ~SIRFUART_RX_IO_INT_EN);
+}
+
+static void sirfsoc_uart_disable_ms(struct uart_port *port)
+{
+ struct sirfsoc_uart_port *sirfport = to_sirfport(port);
+ unsigned long reg;
+ sirfport->ms_enabled = 0;
+ if (!sirfport->hw_flow_ctrl)
+ return;
+ reg = rd_regl(port, SIRFUART_AFC_CTRL);
+ wr_regl(port, SIRFUART_AFC_CTRL, reg & ~0x3FF);
+ reg = rd_regl(port, SIRFUART_INT_EN);
+ wr_regl(port, SIRFUART_INT_EN, reg & ~SIRFUART_CTS_INT_EN);
+}
+
+static void sirfsoc_uart_enable_ms(struct uart_port *port)
+{
+ struct sirfsoc_uart_port *sirfport = to_sirfport(port);
+ unsigned long reg;
+ unsigned long flg;
+ if (!sirfport->hw_flow_ctrl)
+ return;
+ flg = SIRFUART_AFC_RX_EN | SIRFUART_AFC_TX_EN;
+ reg = rd_regl(port, SIRFUART_AFC_CTRL);
+ wr_regl(port, SIRFUART_AFC_CTRL, reg | flg);
+ reg = rd_regl(port, SIRFUART_INT_EN);
+ wr_regl(port, SIRFUART_INT_EN, reg | SIRFUART_CTS_INT_EN);
+ uart_handle_cts_change(port,
+ !(rd_regl(port, SIRFUART_AFC_CTRL) & SIRFUART_CTS_IN_STATUS));
+ sirfport->ms_enabled = 1;
+}
+
+static void sirfsoc_uart_break_ctl(struct uart_port *port, int break_state)
+{
+ unsigned long ulcon = rd_regl(port, SIRFUART_LINE_CTRL);
+ if (break_state)
+ ulcon |= SIRFUART_SET_BREAK;
+ else
+ ulcon &= ~SIRFUART_SET_BREAK;
+ wr_regl(port, SIRFUART_LINE_CTRL, ulcon);
+}
+
+static unsigned int
+sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count)
+{
+ unsigned int ch, rx_count = 0;
+ struct tty_struct *tty;
+
+ tty = tty_port_tty_get(&port->state->port);
+ if (!tty)
+ return -ENODEV;
+
+ while (!(rd_regl(port, SIRFUART_RX_FIFO_STATUS) &
+ SIRFUART_FIFOEMPTY_MASK(port))) {
+ ch = rd_regl(port, SIRFUART_RX_FIFO_DATA) | SIRFUART_DUMMY_READ;
+ if (unlikely(uart_handle_sysrq_char(port, ch)))
+ continue;
+ uart_insert_char(port, 0, 0, ch, TTY_NORMAL);
+ rx_count++;
+ if (rx_count >= max_rx_count)
+ break;
+ }
+
+ port->icount.rx += rx_count;
+ tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
+
+ return rx_count;
+}
+
+static unsigned int
+sirfsoc_uart_pio_tx_chars(struct sirfsoc_uart_port *sirfport, int count)
+{
+ struct uart_port *port = &sirfport->port;
+ struct circ_buf *xmit = &port->state->xmit;
+ unsigned int num_tx = 0;
+ while (!uart_circ_empty(xmit) &&
+ !(rd_regl(port, SIRFUART_TX_FIFO_STATUS) &
+ SIRFUART_FIFOFULL_MASK(port)) &&
+ count--) {
+ wr_regl(port, SIRFUART_TX_FIFO_DATA, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ num_tx++;
+ }
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+ return num_tx;
+}
+
+static irqreturn_t sirfsoc_uart_isr(int irq, void *dev_id)
+{
+ unsigned long intr_status;
+ unsigned long cts_status;
+ unsigned long flag = TTY_NORMAL;
+ struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)dev_id;
+ struct uart_port *port = &sirfport->port;
+ struct uart_state *state = port->state;
+ struct circ_buf *xmit = &port->state->xmit;
+ intr_status = rd_regl(port, SIRFUART_INT_STATUS);
+ wr_regl(port, SIRFUART_INT_STATUS, intr_status);
+ intr_status &= rd_regl(port, SIRFUART_INT_EN);
+ if (unlikely(intr_status & (SIRFUART_ERR_INT_STAT))) {
+ if (intr_status & SIRFUART_RXD_BREAK) {
+ if (uart_handle_break(port))
+ goto recv_char;
+ uart_insert_char(port, intr_status,
+ SIRFUART_RX_OFLOW, 0, TTY_BREAK);
+ return IRQ_HANDLED;
+ }
+ if (intr_status & SIRFUART_RX_OFLOW)
+ port->icount.overrun++;
+ if (intr_status & SIRFUART_FRM_ERR) {
+ port->icount.frame++;
+ flag = TTY_FRAME;
+ }
+ if (intr_status & SIRFUART_PARITY_ERR)
+ flag = TTY_PARITY;
+ wr_regl(port, SIRFUART_RX_FIFO_OP, SIRFUART_RX_FIFO_RESET);
+ wr_regl(port, SIRFUART_RX_FIFO_OP, 0);
+ wr_regl(port, SIRFUART_RX_FIFO_OP, SIRFUART_RX_FIFO_START);
+ intr_status &= port->read_status_mask;
+ uart_insert_char(port, intr_status,
+ SIRFUART_RX_OFLOW_INT, 0, flag);
+ }
+recv_char:
+ if (intr_status & SIRFUART_CTS_INT_EN) {
+ cts_status = !(rd_regl(port, SIRFUART_AFC_CTRL) &
+ SIRFUART_CTS_IN_STATUS);
+ if (cts_status != 0) {
+ uart_handle_cts_change(port, 1);
+ } else {
+ uart_handle_cts_change(port, 0);
+ wake_up_interruptible(&state->port.delta_msr_wait);
+ }
+ }
+ if (intr_status & SIRFUART_RX_IO_INT_EN)
+ sirfsoc_uart_pio_rx_chars(port, SIRFSOC_UART_IO_RX_MAX_CNT);
+ if (intr_status & SIRFUART_TX_INT_EN) {
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ return IRQ_HANDLED;
+ } else {
+ sirfsoc_uart_pio_tx_chars(sirfport,
+ SIRFSOC_UART_IO_TX_REASONABLE_CNT);
+ if ((uart_circ_empty(xmit)) &&
+ (rd_regl(port, SIRFUART_TX_FIFO_STATUS) &
+ SIRFUART_FIFOEMPTY_MASK(port)))
+ sirfsoc_uart_stop_tx(port);
+ }
+ }
+ return IRQ_HANDLED;
+}
+
+static void sirfsoc_uart_start_rx(struct uart_port *port)
+{
+ unsigned long regv;
+ regv = rd_regl(port, SIRFUART_INT_EN);
+ wr_regl(port, SIRFUART_INT_EN, regv | SIRFUART_RX_IO_INT_EN);
+ wr_regl(port, SIRFUART_RX_FIFO_OP, SIRFUART_RX_FIFO_RESET);
+ wr_regl(port, SIRFUART_RX_FIFO_OP, 0);
+ wr_regl(port, SIRFUART_RX_FIFO_OP, SIRFUART_RX_FIFO_START);
+}
+
+static unsigned int
+sirfsoc_calc_sample_div(unsigned long baud_rate,
+ unsigned long ioclk_rate, unsigned long *setted_baud)
+{
+ unsigned long min_delta = ~0UL;
+ unsigned short sample_div;
+ unsigned int regv = 0;
+ unsigned long ioclk_div;
+ unsigned long baud_tmp;
+ int temp_delta;
+
+ for (sample_div = SIRF_MIN_SAMPLE_DIV;
+ sample_div <= SIRF_MAX_SAMPLE_DIV; sample_div++) {
+ ioclk_div = (ioclk_rate / (baud_rate * (sample_div + 1))) - 1;
+ if (ioclk_div > SIRF_IOCLK_DIV_MAX)
+ continue;
+ baud_tmp = ioclk_rate / ((ioclk_div + 1) * (sample_div + 1));
+ temp_delta = baud_tmp - baud_rate;
+ temp_delta = (temp_delta > 0) ? temp_delta : -temp_delta;
+ if (temp_delta < min_delta) {
+ regv = regv & (~SIRF_IOCLK_DIV_MASK);
+ regv = regv | ioclk_div;
+ regv = regv & (~SIRF_SAMPLE_DIV_MASK);
+ regv = regv | (sample_div << SIRF_SAMPLE_DIV_SHIFT);
+ min_delta = temp_delta;
+ *setted_baud = baud_tmp;
+ }
+ }
+ return regv;
+}
+
+static void sirfsoc_uart_set_termios(struct uart_port *port,
+ struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct sirfsoc_uart_port *sirfport = to_sirfport(port);
+ unsigned long ioclk_rate;
+ unsigned long config_reg = 0;
+ unsigned long baud_rate;
+ unsigned long setted_baud;
+ unsigned long flags;
+ unsigned long ic;
+ unsigned int clk_div_reg = 0;
+ unsigned long temp_reg_val;
+ unsigned long rx_time_out;
+ int threshold_div;
+ int temp;
+
+ ioclk_rate = 150000000;
+ switch (termios->c_cflag & CSIZE) {
+ default:
+ case CS8:
+ config_reg |= SIRFUART_DATA_BIT_LEN_8;
+ break;
+ case CS7:
+ config_reg |= SIRFUART_DATA_BIT_LEN_7;
+ break;
+ case CS6:
+ config_reg |= SIRFUART_DATA_BIT_LEN_6;
+ break;
+ case CS5:
+ config_reg |= SIRFUART_DATA_BIT_LEN_5;
+ break;
+ }
+ if (termios->c_cflag & CSTOPB)
+ config_reg |= SIRFUART_STOP_BIT_LEN_2;
+ baud_rate = uart_get_baud_rate(port, termios, old, 0, 4000000);
+ spin_lock_irqsave(&port->lock, flags);
+ port->read_status_mask = SIRFUART_RX_OFLOW_INT;
+ port->ignore_status_mask = 0;
+ /* read flags */
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |=
+ SIRFUART_FRM_ERR_INT | SIRFUART_PARITY_ERR_INT;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= SIRFUART_RXD_BREAK_INT;
+ /* ignore flags */
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |=
+ SIRFUART_FRM_ERR_INT | SIRFUART_PARITY_ERR_INT;
+ if ((termios->c_cflag & CREAD) == 0)
+ port->ignore_status_mask |= SIRFUART_DUMMY_READ;
+ /* enable parity if PARENB is set*/
+ if (termios->c_cflag & PARENB) {
+ if (termios->c_cflag & CMSPAR) {
+ if (termios->c_cflag & PARODD)
+ config_reg |= SIRFUART_STICK_BIT_MARK;
+ else
+ config_reg |= SIRFUART_STICK_BIT_SPACE;
+ } else if (termios->c_cflag & PARODD) {
+ config_reg |= SIRFUART_STICK_BIT_ODD;
+ } else {
+ config_reg |= SIRFUART_STICK_BIT_EVEN;
+ }
+ }
+ /* Hardware Flow Control Settings */
+ if (UART_ENABLE_MS(port, termios->c_cflag)) {
+ if (!sirfport->ms_enabled)
+ sirfsoc_uart_enable_ms(port);
+ } else {
+ if (sirfport->ms_enabled)
+ sirfsoc_uart_disable_ms(port);
+ }
+
+ /* common rate: fast calculation */
+ for (ic = 0; ic < SIRF_BAUD_RATE_SUPPORT_NR; ic++)
+ if (baud_rate == baudrate_to_regv[ic].baud_rate)
+ clk_div_reg = baudrate_to_regv[ic].reg_val;
+ setted_baud = baud_rate;
+ /* arbitary rate setting */
+ if (unlikely(clk_div_reg == 0))
+ clk_div_reg = sirfsoc_calc_sample_div(baud_rate, ioclk_rate,
+ &setted_baud);
+ wr_regl(port, SIRFUART_DIVISOR, clk_div_reg);
+
+ if (tty_termios_baud_rate(termios))
+ tty_termios_encode_baud_rate(termios, setted_baud, setted_baud);
+
+ /* set receive timeout */
+ rx_time_out = SIRFSOC_UART_RX_TIMEOUT(baud_rate, 20000);
+ rx_time_out = (rx_time_out > 0xFFFF) ? 0xFFFF : rx_time_out;
+ config_reg |= SIRFUART_RECV_TIMEOUT(rx_time_out);
+ temp_reg_val = rd_regl(port, SIRFUART_TX_FIFO_OP);
+ wr_regl(port, SIRFUART_RX_FIFO_OP, 0);
+ wr_regl(port, SIRFUART_TX_FIFO_OP,
+ temp_reg_val & ~SIRFUART_TX_FIFO_START);
+ wr_regl(port, SIRFUART_TX_DMA_IO_CTRL, SIRFUART_TX_MODE_IO);
+ wr_regl(port, SIRFUART_RX_DMA_IO_CTRL, SIRFUART_RX_MODE_IO);
+ wr_regl(port, SIRFUART_LINE_CTRL, config_reg);
+
+ /* Reset Rx/Tx FIFO Threshold level for proper baudrate */
+ if (baud_rate < 1000000)
+ threshold_div = 1;
+ else
+ threshold_div = 2;
+ temp = port->line == 1 ? 16 : 64;
+ wr_regl(port, SIRFUART_TX_FIFO_CTRL, temp / threshold_div);
+ wr_regl(port, SIRFUART_RX_FIFO_CTRL, temp / threshold_div);
+ temp_reg_val |= SIRFUART_TX_FIFO_START;
+ wr_regl(port, SIRFUART_TX_FIFO_OP, temp_reg_val);
+ uart_update_timeout(port, termios->c_cflag, baud_rate);
+ sirfsoc_uart_start_rx(port);
+ wr_regl(port, SIRFUART_TX_RX_EN, SIRFUART_TX_EN | SIRFUART_RX_EN);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void startup_uart_controller(struct uart_port *port)
+{
+ unsigned long temp_regv;
+ int temp;
+ temp_regv = rd_regl(port, SIRFUART_TX_DMA_IO_CTRL);
+ wr_regl(port, SIRFUART_TX_DMA_IO_CTRL, temp_regv | SIRFUART_TX_MODE_IO);
+ temp_regv = rd_regl(port, SIRFUART_RX_DMA_IO_CTRL);
+ wr_regl(port, SIRFUART_RX_DMA_IO_CTRL, temp_regv | SIRFUART_RX_MODE_IO);
+ wr_regl(port, SIRFUART_TX_DMA_IO_LEN, 0);
+ wr_regl(port, SIRFUART_RX_DMA_IO_LEN, 0);
+ wr_regl(port, SIRFUART_TX_RX_EN, SIRFUART_RX_EN | SIRFUART_TX_EN);
+ wr_regl(port, SIRFUART_TX_FIFO_OP, SIRFUART_TX_FIFO_RESET);
+ wr_regl(port, SIRFUART_TX_FIFO_OP, 0);
+ wr_regl(port, SIRFUART_RX_FIFO_OP, SIRFUART_RX_FIFO_RESET);
+ wr_regl(port, SIRFUART_RX_FIFO_OP, 0);
+ temp = port->line == 1 ? 16 : 64;
+ wr_regl(port, SIRFUART_TX_FIFO_CTRL, temp);
+ wr_regl(port, SIRFUART_RX_FIFO_CTRL, temp);
+}
+
+static int sirfsoc_uart_startup(struct uart_port *port)
+{
+ struct sirfsoc_uart_port *sirfport = to_sirfport(port);
+ unsigned int index = port->line;
+ int ret;
+ set_irq_flags(port->irq, IRQF_VALID | IRQF_NOAUTOEN);
+ ret = request_irq(port->irq,
+ sirfsoc_uart_isr,
+ 0,
+ SIRFUART_PORT_NAME,
+ sirfport);
+ if (ret != 0) {
+ dev_err(port->dev, "UART%d request IRQ line (%d) failed.\n",
+ index, port->irq);
+ goto irq_err;
+ }
+ startup_uart_controller(port);
+ enable_irq(port->irq);
+irq_err:
+ return ret;
+}
+
+static void sirfsoc_uart_shutdown(struct uart_port *port)
+{
+ struct sirfsoc_uart_port *sirfport = to_sirfport(port);
+ wr_regl(port, SIRFUART_INT_EN, 0);
+ free_irq(port->irq, sirfport);
+ if (sirfport->ms_enabled) {
+ sirfsoc_uart_disable_ms(port);
+ sirfport->ms_enabled = 0;
+ }
+}
+
+static const char *sirfsoc_uart_type(struct uart_port *port)
+{
+ return port->type == SIRFSOC_PORT_TYPE ? SIRFUART_PORT_NAME : NULL;
+}
+
+static int sirfsoc_uart_request_port(struct uart_port *port)
+{
+ void *ret;
+ ret = request_mem_region(port->mapbase,
+ SIRFUART_MAP_SIZE, SIRFUART_PORT_NAME);
+ return ret ? 0 : -EBUSY;
+}
+
+static void sirfsoc_uart_release_port(struct uart_port *port)
+{
+ release_mem_region(port->mapbase, SIRFUART_MAP_SIZE);
+}
+
+static void sirfsoc_uart_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE) {
+ port->type = SIRFSOC_PORT_TYPE;
+ sirfsoc_uart_request_port(port);
+ }
+}
+
+static struct uart_ops sirfsoc_uart_ops = {
+ .tx_empty = sirfsoc_uart_tx_empty,
+ .get_mctrl = sirfsoc_uart_get_mctrl,
+ .set_mctrl = sirfsoc_uart_set_mctrl,
+ .stop_tx = sirfsoc_uart_stop_tx,
+ .start_tx = sirfsoc_uart_start_tx,
+ .stop_rx = sirfsoc_uart_stop_rx,
+ .enable_ms = sirfsoc_uart_enable_ms,
+ .break_ctl = sirfsoc_uart_break_ctl,
+ .startup = sirfsoc_uart_startup,
+ .shutdown = sirfsoc_uart_shutdown,
+ .set_termios = sirfsoc_uart_set_termios,
+ .type = sirfsoc_uart_type,
+ .release_port = sirfsoc_uart_release_port,
+ .request_port = sirfsoc_uart_request_port,
+ .config_port = sirfsoc_uart_config_port,
+};
+
+#ifdef CONFIG_SERIAL_SIRFSOC_CONSOLE
+static int __init sirfsoc_uart_console_setup(struct console *co, char *options)
+{
+ unsigned int baud = 115200;
+ unsigned int bits = 8;
+ unsigned int parity = 'n';
+ unsigned int flow = 'n';
+ struct uart_port *port = &sirfsoc_uart_ports[co->index].port;
+
+ if (co->index < 0 || co->index >= SIRFSOC_UART_NR)
+ return -EINVAL;
+
+ if (!port->mapbase)
+ return -ENODEV;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ port->cons = co;
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static void sirfsoc_uart_console_putchar(struct uart_port *port, int ch)
+{
+ while (rd_regl(port,
+ SIRFUART_TX_FIFO_STATUS) & SIRFUART_FIFOFULL_MASK(port))
+ cpu_relax();
+ wr_regb(port, SIRFUART_TX_FIFO_DATA, ch);
+}
+
+static void sirfsoc_uart_console_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ struct uart_port *port = &sirfsoc_uart_ports[co->index].port;
+ uart_console_write(port, s, count, sirfsoc_uart_console_putchar);
+}
+
+static struct console sirfsoc_uart_console = {
+ .name = SIRFSOC_UART_NAME,
+ .device = uart_console_device,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .write = sirfsoc_uart_console_write,
+ .setup = sirfsoc_uart_console_setup,
+ .data = &sirfsoc_uart_drv,
+};
+
+static int __init sirfsoc_uart_console_init(void)
+{
+ register_console(&sirfsoc_uart_console);
+ return 0;
+}
+console_initcall(sirfsoc_uart_console_init);
+#endif
+
+static struct uart_driver sirfsoc_uart_drv = {
+ .owner = THIS_MODULE,
+ .driver_name = SIRFUART_PORT_NAME,
+ .nr = SIRFSOC_UART_NR,
+ .dev_name = SIRFSOC_UART_NAME,
+ .major = SIRFSOC_UART_MAJOR,
+ .minor = SIRFSOC_UART_MINOR,
+#ifdef CONFIG_SERIAL_SIRFSOC_CONSOLE
+ .cons = &sirfsoc_uart_console,
+#else
+ .cons = NULL,
+#endif
+};
+
+int sirfsoc_uart_probe(struct platform_device *pdev)
+{
+ struct sirfsoc_uart_port *sirfport;
+ struct uart_port *port;
+ struct resource *res;
+ int ret;
+
+ if (of_property_read_u32(pdev->dev.of_node, "cell-index", &pdev->id)) {
+ dev_err(&pdev->dev,
+ "Unable to find cell-index in uart node.\n");
+ ret = -EFAULT;
+ goto err;
+ }
+
+ sirfport = &sirfsoc_uart_ports[pdev->id];
+ port = &sirfport->port;
+ port->dev = &pdev->dev;
+ port->private_data = sirfport;
+
+ if (of_find_property(pdev->dev.of_node, "hw_flow_ctrl", NULL))
+ sirfport->hw_flow_ctrl = 1;
+
+ if (of_property_read_u32(pdev->dev.of_node,
+ "fifosize",
+ &port->fifosize)) {
+ dev_err(&pdev->dev,
+ "Unable to find fifosize in uart node.\n");
+ ret = -EFAULT;
+ goto err;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "Insufficient resources.\n");
+ ret = -EFAULT;
+ goto err;
+ }
+ port->mapbase = res->start;
+ port->membase = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ if (!port->membase) {
+ dev_err(&pdev->dev, "Cannot remap resource.\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "Insufficient resources.\n");
+ ret = -EFAULT;
+ goto irq_err;
+ }
+ port->irq = res->start;
+
+ if (sirfport->hw_flow_ctrl) {
+ sirfport->pmx = pinmux_get(&pdev->dev, NULL);
+ ret = IS_ERR(sirfport->pmx);
+ if (ret)
+ goto pmx_err;
+
+ pinmux_enable(sirfport->pmx);
+ }
+
+ port->ops = &sirfsoc_uart_ops;
+ spin_lock_init(&port->lock);
+
+ platform_set_drvdata(pdev, sirfport);
+ ret = uart_add_one_port(&sirfsoc_uart_drv, port);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Cannot add UART port(%d).\n", pdev->id);
+ goto port_err;
+ }
+
+ return 0;
+
+port_err:
+ platform_set_drvdata(pdev, NULL);
+ if (sirfport->hw_flow_ctrl) {
+ pinmux_disable(sirfport->pmx);
+ pinmux_put(sirfport->pmx);
+ }
+pmx_err:
+irq_err:
+ devm_iounmap(&pdev->dev, port->membase);
+err:
+ return ret;
+}
+
+static int sirfsoc_uart_remove(struct platform_device *pdev)
+{
+ struct sirfsoc_uart_port *sirfport = platform_get_drvdata(pdev);
+ struct uart_port *port = &sirfport->port;
+ platform_set_drvdata(pdev, NULL);
+ if (sirfport->hw_flow_ctrl) {
+ pinmux_disable(sirfport->pmx);
+ pinmux_put(sirfport->pmx);
+ }
+ devm_iounmap(&pdev->dev, port->membase);
+ uart_remove_one_port(&sirfsoc_uart_drv, port);
+ return 0;
+}
+
+static int
+sirfsoc_uart_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct sirfsoc_uart_port *sirfport = platform_get_drvdata(pdev);
+ struct uart_port *port = &sirfport->port;
+ uart_suspend_port(&sirfsoc_uart_drv, port);
+ return 0;
+}
+
+static int sirfsoc_uart_resume(struct platform_device *pdev)
+{
+ struct sirfsoc_uart_port *sirfport = platform_get_drvdata(pdev);
+ struct uart_port *port = &sirfport->port;
+ uart_resume_port(&sirfsoc_uart_drv, port);
+ return 0;
+}
+
+static struct of_device_id sirfsoc_uart_ids[] __devinitdata = {
+ { .compatible = "sirf,prima2-uart", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, sirfsoc_serial_of_match);
+
+static struct platform_driver sirfsoc_uart_driver = {
+ .probe = sirfsoc_uart_probe,
+ .remove = __devexit_p(sirfsoc_uart_remove),
+ .suspend = sirfsoc_uart_suspend,
+ .resume = sirfsoc_uart_resume,
+ .driver = {
+ .name = SIRFUART_PORT_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = sirfsoc_uart_ids,
+ },
+};
+
+static int __init sirfsoc_uart_init(void)
+{
+ int ret = 0;
+
+ ret = uart_register_driver(&sirfsoc_uart_drv);
+ if (ret)
+ goto out;
+
+ ret = platform_driver_register(&sirfsoc_uart_driver);
+ if (ret)
+ uart_unregister_driver(&sirfsoc_uart_drv);
+out:
+ return ret;
+}
+module_init(sirfsoc_uart_init);
+
+static void __exit sirfsoc_uart_exit(void)
+{
+ platform_driver_unregister(&sirfsoc_uart_driver);
+ uart_unregister_driver(&sirfsoc_uart_drv);
+}
+module_exit(sirfsoc_uart_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Bin Shi <Bin.Shi@csr.com>, Rong Wang<Rong.Wang@csr.com>");
+MODULE_DESCRIPTION("CSR SiRFprimaII Uart Driver");
--- /dev/null
+/*
+ * Drivers for CSR SiRFprimaII onboard UARTs.
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include <linux/bitops.h>
+
+/* UART Register Offset Define */
+#define SIRFUART_LINE_CTRL 0x0040
+#define SIRFUART_TX_RX_EN 0x004c
+#define SIRFUART_DIVISOR 0x0050
+#define SIRFUART_INT_EN 0x0054
+#define SIRFUART_INT_STATUS 0x0058
+#define SIRFUART_TX_DMA_IO_CTRL 0x0100
+#define SIRFUART_TX_DMA_IO_LEN 0x0104
+#define SIRFUART_TX_FIFO_CTRL 0x0108
+#define SIRFUART_TX_FIFO_LEVEL_CHK 0x010C
+#define SIRFUART_TX_FIFO_OP 0x0110
+#define SIRFUART_TX_FIFO_STATUS 0x0114
+#define SIRFUART_TX_FIFO_DATA 0x0118
+#define SIRFUART_RX_DMA_IO_CTRL 0x0120
+#define SIRFUART_RX_DMA_IO_LEN 0x0124
+#define SIRFUART_RX_FIFO_CTRL 0x0128
+#define SIRFUART_RX_FIFO_LEVEL_CHK 0x012C
+#define SIRFUART_RX_FIFO_OP 0x0130
+#define SIRFUART_RX_FIFO_STATUS 0x0134
+#define SIRFUART_RX_FIFO_DATA 0x0138
+#define SIRFUART_AFC_CTRL 0x0140
+#define SIRFUART_SWH_DMA_IO 0x0148
+
+/* UART Line Control Register */
+#define SIRFUART_DATA_BIT_LEN_MASK 0x3
+#define SIRFUART_DATA_BIT_LEN_5 BIT(0)
+#define SIRFUART_DATA_BIT_LEN_6 1
+#define SIRFUART_DATA_BIT_LEN_7 2
+#define SIRFUART_DATA_BIT_LEN_8 3
+#define SIRFUART_STOP_BIT_LEN_1 0
+#define SIRFUART_STOP_BIT_LEN_2 BIT(2)
+#define SIRFUART_PARITY_EN BIT(3)
+#define SIRFUART_EVEN_BIT BIT(4)
+#define SIRFUART_STICK_BIT_MASK (7 << 3)
+#define SIRFUART_STICK_BIT_NONE (0 << 3)
+#define SIRFUART_STICK_BIT_EVEN BIT(3)
+#define SIRFUART_STICK_BIT_ODD (3 << 3)
+#define SIRFUART_STICK_BIT_MARK (5 << 3)
+#define SIRFUART_STICK_BIT_SPACE (7 << 3)
+#define SIRFUART_SET_BREAK BIT(6)
+#define SIRFUART_LOOP_BACK BIT(7)
+#define SIRFUART_PARITY_MASK (7 << 3)
+#define SIRFUART_DUMMY_READ BIT(16)
+
+#define SIRFSOC_UART_RX_TIMEOUT(br, to) (((br) * (((to) + 999) / 1000)) / 1000)
+#define SIRFUART_RECV_TIMEOUT_MASK (0xFFFF << 16)
+#define SIRFUART_RECV_TIMEOUT(x) (((x) & 0xFFFF) << 16)
+
+/* UART Auto Flow Control */
+#define SIRFUART_AFC_RX_THD_MASK 0x000000FF
+#define SIRFUART_AFC_RX_EN BIT(8)
+#define SIRFUART_AFC_TX_EN BIT(9)
+#define SIRFUART_CTS_CTRL BIT(10)
+#define SIRFUART_RTS_CTRL BIT(11)
+#define SIRFUART_CTS_IN_STATUS BIT(12)
+#define SIRFUART_RTS_OUT_STATUS BIT(13)
+
+/* UART Interrupt Enable Register */
+#define SIRFUART_RX_DONE_INT BIT(0)
+#define SIRFUART_TX_DONE_INT BIT(1)
+#define SIRFUART_RX_OFLOW_INT BIT(2)
+#define SIRFUART_TX_ALLOUT_INT BIT(3)
+#define SIRFUART_RX_IO_DMA_INT BIT(4)
+#define SIRFUART_TX_IO_DMA_INT BIT(5)
+#define SIRFUART_RXFIFO_FULL_INT BIT(6)
+#define SIRFUART_TXFIFO_EMPTY_INT BIT(7)
+#define SIRFUART_RXFIFO_THD_INT BIT(8)
+#define SIRFUART_TXFIFO_THD_INT BIT(9)
+#define SIRFUART_FRM_ERR_INT BIT(10)
+#define SIRFUART_RXD_BREAK_INT BIT(11)
+#define SIRFUART_RX_TIMEOUT_INT BIT(12)
+#define SIRFUART_PARITY_ERR_INT BIT(13)
+#define SIRFUART_CTS_INT_EN BIT(14)
+#define SIRFUART_RTS_INT_EN BIT(15)
+
+/* UART Interrupt Status Register */
+#define SIRFUART_RX_DONE BIT(0)
+#define SIRFUART_TX_DONE BIT(1)
+#define SIRFUART_RX_OFLOW BIT(2)
+#define SIRFUART_TX_ALL_EMPTY BIT(3)
+#define SIRFUART_DMA_IO_RX_DONE BIT(4)
+#define SIRFUART_DMA_IO_TX_DONE BIT(5)
+#define SIRFUART_RXFIFO_FULL BIT(6)
+#define SIRFUART_TXFIFO_EMPTY BIT(7)
+#define SIRFUART_RXFIFO_THD_REACH BIT(8)
+#define SIRFUART_TXFIFO_THD_REACH BIT(9)
+#define SIRFUART_FRM_ERR BIT(10)
+#define SIRFUART_RXD_BREAK BIT(11)
+#define SIRFUART_RX_TIMEOUT BIT(12)
+#define SIRFUART_PARITY_ERR BIT(13)
+#define SIRFUART_CTS_CHANGE BIT(14)
+#define SIRFUART_RTS_CHANGE BIT(15)
+#define SIRFUART_PLUG_IN BIT(16)
+
+#define SIRFUART_ERR_INT_STAT \
+ (SIRFUART_RX_OFLOW | \
+ SIRFUART_FRM_ERR | \
+ SIRFUART_RXD_BREAK | \
+ SIRFUART_PARITY_ERR)
+#define SIRFUART_ERR_INT_EN \
+ (SIRFUART_RX_OFLOW_INT | \
+ SIRFUART_FRM_ERR_INT | \
+ SIRFUART_RXD_BREAK_INT | \
+ SIRFUART_PARITY_ERR_INT)
+#define SIRFUART_TX_INT_EN SIRFUART_TXFIFO_EMPTY_INT
+#define SIRFUART_RX_IO_INT_EN \
+ (SIRFUART_RX_TIMEOUT_INT | \
+ SIRFUART_RXFIFO_THD_INT | \
+ SIRFUART_RXFIFO_FULL_INT | \
+ SIRFUART_ERR_INT_EN)
+
+/* UART FIFO Register */
+#define SIRFUART_TX_FIFO_STOP 0x0
+#define SIRFUART_TX_FIFO_RESET 0x1
+#define SIRFUART_TX_FIFO_START 0x2
+#define SIRFUART_RX_FIFO_STOP 0x0
+#define SIRFUART_RX_FIFO_RESET 0x1
+#define SIRFUART_RX_FIFO_START 0x2
+#define SIRFUART_TX_MODE_DMA 0
+#define SIRFUART_TX_MODE_IO 1
+#define SIRFUART_RX_MODE_DMA 0
+#define SIRFUART_RX_MODE_IO 1
+
+#define SIRFUART_RX_EN 0x1
+#define SIRFUART_TX_EN 0x2
+
+/* Generic Definitions */
+#define SIRFSOC_UART_NAME "ttySiRF"
+#define SIRFSOC_UART_MAJOR 0
+#define SIRFSOC_UART_MINOR 0
+#define SIRFUART_PORT_NAME "sirfsoc-uart"
+#define SIRFUART_MAP_SIZE 0x200
+#define SIRFSOC_UART_NR 3
+#define SIRFSOC_PORT_TYPE 0xa5
+
+/* Baud Rate Calculation */
+#define SIRF_MIN_SAMPLE_DIV 0xf
+#define SIRF_MAX_SAMPLE_DIV 0x3f
+#define SIRF_IOCLK_DIV_MAX 0xffff
+#define SIRF_SAMPLE_DIV_SHIFT 16
+#define SIRF_IOCLK_DIV_MASK 0xffff
+#define SIRF_SAMPLE_DIV_MASK 0x3f0000
+#define SIRF_BAUD_RATE_SUPPORT_NR 18
+
+/* For Fast Baud Rate Calculation */
+struct sirfsoc_baudrate_to_regv {
+ unsigned int baud_rate;
+ unsigned int reg_val;
+};
+
+struct sirfsoc_uart_port {
+ unsigned char hw_flow_ctrl;
+ unsigned char ms_enabled;
+
+ struct uart_port port;
+ struct pinmux *pmx;
+};
+
+/* Hardware Flow Control */
+#define SIRFUART_AFC_CTRL_RX_THD 0x70
+
+/* Register Access Control */
+#define portaddr(port, reg) ((port)->membase + (reg))
+#define rd_regb(port, reg) (__raw_readb(portaddr(port, reg)))
+#define rd_regl(port, reg) (__raw_readl(portaddr(port, reg)))
+#define wr_regb(port, reg, val) __raw_writeb(val, portaddr(port, reg))
+#define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg))
+
+/* UART Port Mask */
+#define SIRFUART_FIFOLEVEL_MASK(port) ((port->line == 1) ? (0x1f) : (0x7f))
+#define SIRFUART_FIFOFULL_MASK(port) ((port->line == 1) ? (0x20) : (0x80))
+#define SIRFUART_FIFOEMPTY_MASK(port) ((port->line == 1) ? (0x40) : (0x100))
+
+/* I/O Mode */
+#define SIRFSOC_UART_IO_RX_MAX_CNT 256
+#define SIRFSOC_UART_IO_TX_REASONABLE_CNT 6
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff