V4L/DVB (10046): gspca - ov534: Use the gspca usb buf for usb control messages.
authorJean-Francois Moine <moinejf@free.fr>
Mon, 29 Dec 2008 09:19:43 +0000 (06:19 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Tue, 30 Dec 2008 11:40:06 +0000 (09:40 -0200)
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/video/gspca/ov534.c

index d5c74d65ce8aff279539cf0b88a6589a5180c234..406f6bc12d9f71706583c74acbd951eea16269ce 100644 (file)
@@ -63,65 +63,66 @@ static struct v4l2_pix_format vga_mode[] = {
         .priv = 0},
 };
 
-static void ov534_reg_write(struct usb_device *udev, u16 reg, u8 val)
+static void ov534_reg_write(struct gspca_dev *gspca_dev, u16 reg, u8 val)
 {
-       u8 data = val;
+       struct usb_device *udev = gspca_dev->dev;
        int ret;
 
        PDEBUG(D_USBO, "reg=0x%04x, val=0%02x", reg, val);
+       gspca_dev->usb_buf[0] = val;
        ret = usb_control_msg(udev,
                              usb_sndctrlpipe(udev, 0),
                              0x1,
                              USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-                             0x0, reg, &data, 1, CTRL_TIMEOUT);
+                             0x0, reg, gspca_dev->usb_buf, 1, CTRL_TIMEOUT);
        if (ret < 0)
                PDEBUG(D_ERR, "write failed");
 }
 
-static u8 ov534_reg_read(struct usb_device *udev, u16 reg)
+static u8 ov534_reg_read(struct gspca_dev *gspca_dev, u16 reg)
 {
-       u8 data;
+       struct usb_device *udev = gspca_dev->dev;
        int ret;
 
        ret = usb_control_msg(udev,
                              usb_rcvctrlpipe(udev, 0),
                              0x1,
                              USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-                             0x0, reg, &data, 1, CTRL_TIMEOUT);
-       PDEBUG(D_USBI, "reg=0x%04x, data=0x%02x", reg, data);
+                             0x0, reg, gspca_dev->usb_buf, 1, CTRL_TIMEOUT);
+       PDEBUG(D_USBI, "reg=0x%04x, data=0x%02x", reg, gspca_dev->usb_buf[0]);
        if (ret < 0)
                PDEBUG(D_ERR, "read failed");
-       return data;
+       return gspca_dev->usb_buf[0];
 }
 
 /* Two bits control LED: 0x21 bit 7 and 0x23 bit 7.
  * (direction and output)? */
-static void ov534_set_led(struct usb_device *udev, int status)
+static void ov534_set_led(struct gspca_dev *gspca_dev, int status)
 {
        u8 data;
 
        PDEBUG(D_CONF, "led status: %d", status);
 
-       data = ov534_reg_read(udev, 0x21);
+       data = ov534_reg_read(gspca_dev, 0x21);
        data |= 0x80;
-       ov534_reg_write(udev, 0x21, data);
+       ov534_reg_write(gspca_dev, 0x21, data);
 
-       data = ov534_reg_read(udev, 0x23);
+       data = ov534_reg_read(gspca_dev, 0x23);
        if (status)
                data |= 0x80;
        else
                data &= ~(0x80);
 
-       ov534_reg_write(udev, 0x23, data);
+       ov534_reg_write(gspca_dev, 0x23, data);
 }
 
-static int sccb_check_status(struct usb_device *udev)
+static int sccb_check_status(struct gspca_dev *gspca_dev)
 {
        u8 data;
        int i;
 
        for (i = 0; i < 5; i++) {
-               data = ov534_reg_read(udev, OV534_REG_STATUS);
+               data = ov534_reg_read(gspca_dev, OV534_REG_STATUS);
 
                switch (data) {
                case 0x00:
@@ -138,30 +139,30 @@ static int sccb_check_status(struct usb_device *udev)
        return 0;
 }
 
-static void sccb_reg_write(struct usb_device *udev, u16 reg, u8 val)
+static void sccb_reg_write(struct gspca_dev *gspca_dev, u16 reg, u8 val)
 {
        PDEBUG(D_USBO, "reg: 0x%04x, val: 0x%02x", reg, val);
-       ov534_reg_write(udev, OV534_REG_SUBADDR, reg);
-       ov534_reg_write(udev, OV534_REG_WRITE, val);
-       ov534_reg_write(udev, OV534_REG_OPERATION, OV534_OP_WRITE_3);
+       ov534_reg_write(gspca_dev, OV534_REG_SUBADDR, reg);
+       ov534_reg_write(gspca_dev, OV534_REG_WRITE, val);
+       ov534_reg_write(gspca_dev, OV534_REG_OPERATION, OV534_OP_WRITE_3);
 
-       if (!sccb_check_status(udev))
+       if (!sccb_check_status(gspca_dev))
                PDEBUG(D_ERR, "sccb_reg_write failed");
 }
 
 #ifdef GSPCA_DEBUG
-static u8 sccb_reg_read(struct usb_device *udev, u16 reg)
+static u8 sccb_reg_read(struct gspca_dev *gspca_dev, u16 reg)
 {
-       ov534_reg_write(udev, OV534_REG_SUBADDR, reg);
-       ov534_reg_write(udev, OV534_REG_OPERATION, OV534_OP_WRITE_2);
-       if (!sccb_check_status(udev))
+       ov534_reg_write(gspca_dev, OV534_REG_SUBADDR, reg);
+       ov534_reg_write(gspca_dev, OV534_REG_OPERATION, OV534_OP_WRITE_2);
+       if (!sccb_check_status(gspca_dev))
                PDEBUG(D_ERR, "sccb_reg_read failed 1");
 
-       ov534_reg_write(udev, OV534_REG_OPERATION, OV534_OP_READ_2);
-       if (!sccb_check_status(udev))
+       ov534_reg_write(gspca_dev, OV534_REG_OPERATION, OV534_OP_READ_2);
+       if (!sccb_check_status(gspca_dev))
                PDEBUG(D_ERR, "sccb_reg_read failed 2");
 
-       return ov534_reg_read(udev, OV534_REG_READ);
+       return ov534_reg_read(gspca_dev, OV534_REG_READ);
 }
 #endif
 
@@ -318,26 +319,26 @@ static void ov534_set_frame_rate(struct gspca_dev *gspca_dev)
 
        switch (fr) {
        case 50:
-               sccb_reg_write(gspca_dev->dev, 0x11, 0x01);
-               sccb_reg_write(gspca_dev->dev, 0x0d, 0x41);
-               ov534_reg_write(gspca_dev->dev, 0xe5, 0x02);
+               sccb_reg_write(gspca_dev, 0x11, 0x01);
+               sccb_reg_write(gspca_dev, 0x0d, 0x41);
+               ov534_reg_write(gspca_dev, 0xe5, 0x02);
                break;
        case 40:
-               sccb_reg_write(gspca_dev->dev, 0x11, 0x02);
-               sccb_reg_write(gspca_dev->dev, 0x0d, 0xc1);
-               ov534_reg_write(gspca_dev->dev, 0xe5, 0x04);
+               sccb_reg_write(gspca_dev, 0x11, 0x02);
+               sccb_reg_write(gspca_dev, 0x0d, 0xc1);
+               ov534_reg_write(gspca_dev, 0xe5, 0x04);
                break;
 /*     case 30: */
        default:
                fr = 30;
-               sccb_reg_write(gspca_dev->dev, 0x11, 0x04);
-               sccb_reg_write(gspca_dev->dev, 0x0d, 0x81);
-               ov534_reg_write(gspca_dev->dev, 0xe5, 0x02);
+               sccb_reg_write(gspca_dev, 0x11, 0x04);
+               sccb_reg_write(gspca_dev, 0x0d, 0x81);
+               ov534_reg_write(gspca_dev, 0xe5, 0x02);
                break;
        case 15:
-               sccb_reg_write(gspca_dev->dev, 0x11, 0x03);
-               sccb_reg_write(gspca_dev->dev, 0x0d, 0x41);
-               ov534_reg_write(gspca_dev->dev, 0xe5, 0x04);
+               sccb_reg_write(gspca_dev, 0x11, 0x03);
+               sccb_reg_write(gspca_dev, 0x0d, 0x41);
+               ov534_reg_write(gspca_dev, 0xe5, 0x04);
                break;
        }
 
@@ -346,27 +347,28 @@ static void ov534_set_frame_rate(struct gspca_dev *gspca_dev)
 }
 
 /* setup method */
-static void ov534_setup(struct usb_device *udev)
+static void ov534_setup(struct gspca_dev *gspca_dev)
 {
        int i;
 
        /* Initialize bridge chip */
        for (i = 0; i < ARRAY_SIZE(ov534_reg_initdata); i++)
-               ov534_reg_write(udev, ov534_reg_initdata[i][0],
+               ov534_reg_write(gspca_dev, ov534_reg_initdata[i][0],
                                ov534_reg_initdata[i][1]);
 
        PDEBUG(D_PROBE, "sensor is ov%02x%02x",
-               sccb_reg_read(udev, 0x0a), sccb_reg_read(udev, 0x0b));
+               sccb_reg_read(gspca_dev, 0x0a),
+               sccb_reg_read(gspca_dev, 0x0b));
 
-       ov534_set_led(udev, 1);
+       ov534_set_led(gspca_dev, 1);
 
        /* Initialize sensor */
        for (i = 0; i < ARRAY_SIZE(ov772x_reg_initdata); i++)
-               sccb_reg_write(udev, ov772x_reg_initdata[i][0],
+               sccb_reg_write(gspca_dev, ov772x_reg_initdata[i][0],
                               ov772x_reg_initdata[i][1]);
 
-       ov534_reg_write(udev, 0xe0, 0x09);
-       ov534_set_led(udev, 0);
+       ov534_reg_write(gspca_dev, 0xe0, 0x09);
+       ov534_set_led(gspca_dev, 0);
 }
 
 /* this function is called at probe time */
@@ -390,7 +392,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 /* this function is called at probe and resume time */
 static int sd_init(struct gspca_dev *gspca_dev)
 {
-       ov534_setup(gspca_dev->dev);
+       ov534_setup(gspca_dev);
        ov534_set_frame_rate(gspca_dev);
 
        return 0;
@@ -399,8 +401,8 @@ static int sd_init(struct gspca_dev *gspca_dev)
 static int sd_start(struct gspca_dev *gspca_dev)
 {
        /* start streaming data */
-       ov534_set_led(gspca_dev->dev, 1);
-       ov534_reg_write(gspca_dev->dev, 0xe0, 0x00);
+       ov534_set_led(gspca_dev, 1);
+       ov534_reg_write(gspca_dev, 0xe0, 0x00);
 
        return 0;
 }
@@ -408,8 +410,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
 static void sd_stopN(struct gspca_dev *gspca_dev)
 {
        /* stop streaming data */
-       ov534_reg_write(gspca_dev->dev, 0xe0, 0x09);
-       ov534_set_led(gspca_dev->dev, 0);
+       ov534_reg_write(gspca_dev, 0xe0, 0x09);
+       ov534_set_led(gspca_dev, 0);
 }
 
 /* Values for bmHeaderInfo (Video and Still Image Payload Headers, 2.4.3.3) */