wil6210: fix printouts for better readability
authorVladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Tue, 8 Apr 2014 08:36:16 +0000 (11:36 +0300)
committerJohn W. Linville <linville@tuxdriver.com>
Tue, 22 Apr 2014 19:06:28 +0000 (15:06 -0400)
Reshuffle prints to consolidate firmware/hardware information
report upon card init

Convert print for unhandled MISC ISR bits to "debug" - it is
normal situation and not an "error"

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/ath/wil6210/interrupt.c
drivers/net/wireless/ath/wil6210/main.c
drivers/net/wireless/ath/wil6210/pcie_bus.c
drivers/net/wireless/ath/wil6210/wmi.c

index 5824cd41e4bac6d387087ab84739df3225b8f799..73593aa3cd9813e2bd6849b969427f83f1a9a578 100644 (file)
@@ -338,7 +338,7 @@ static irqreturn_t wil6210_irq_misc_thread(int irq, void *cookie)
        }
 
        if (isr)
-               wil_err(wil, "un-handled MISC ISR bits 0x%08x\n", isr);
+               wil_dbg_irq(wil, "un-handled MISC ISR bits 0x%08x\n", isr);
 
        wil->isr_misc = 0;
 
index 95f4efe9ef37c652722a5ca381af4529a6ea65e9..1b265fd19de26060329ffb3c7b2818feeb2fcc68 100644 (file)
@@ -363,8 +363,8 @@ static int wil_wait_for_fw_ready(struct wil6210_priv *wil)
                wil_err(wil, "Firmware not ready\n");
                return -ETIME;
        } else {
-               wil_dbg_misc(wil, "FW ready after %d ms\n",
-                            jiffies_to_msecs(to-left));
+               wil_info(wil, "FW ready after %d ms. HW version 0x%08x\n",
+                        jiffies_to_msecs(to-left), wil->hw_version);
        }
        return 0;
 }
index f1e1bb338d681e71c96b130363bf04387c3ffa85..0660884183070d7d46876e0a07effb2c1650e005 100644 (file)
@@ -74,8 +74,6 @@ static int wil_if_pcie_enable(struct wil6210_priv *wil)
        if (rc)
                goto release_irq;
 
-       wil_info(wil, "HW version: 0x%08x\n", wil->hw_version);
-
        return 0;
 
  release_irq:
index 2ba56eef0c457d4397c27fa84a1291b011d3884f..b7764f35ab6112b4f79002af7d2b4f877db4fb3a 100644 (file)
@@ -192,7 +192,7 @@ static int __wmi_send(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len)
        might_sleep();
 
        if (!test_bit(wil_status_fwready, &wil->status)) {
-               wil_err(wil, "FW not ready\n");
+               wil_err(wil, "WMI: cannot send command while FW not ready\n");
                return -EAGAIN;
        }
 
@@ -276,8 +276,8 @@ static void wmi_evt_ready(struct wil6210_priv *wil, int id, void *d, int len)
        wil->fw_version = le32_to_cpu(evt->sw_version);
        wil->n_mids = evt->numof_additional_mids;
 
-       wil_dbg_wmi(wil, "FW ver. %d; MAC %pM; %d MID's\n", wil->fw_version,
-                   evt->mac, wil->n_mids);
+       wil_info(wil, "FW ver. %d; MAC %pM; %d MID's\n", wil->fw_version,
+                evt->mac, wil->n_mids);
 
        if (!is_valid_ether_addr(ndev->dev_addr)) {
                memcpy(ndev->dev_addr, evt->mac, ETH_ALEN);
@@ -290,7 +290,7 @@ static void wmi_evt_ready(struct wil6210_priv *wil, int id, void *d, int len)
 static void wmi_evt_fw_ready(struct wil6210_priv *wil, int id, void *d,
                             int len)
 {
-       wil_dbg_wmi(wil, "WMI: FW ready\n");
+       wil_dbg_wmi(wil, "WMI: got FW ready event\n");
 
        set_bit(wil_status_fwready, &wil->status);
        /* reuse wmi_ready for the firmware ready indication */