OMAP tags are deprecrated so drop them.
Drop UART config data which decides which UARTs to enable during boot.
This is no longer necessary since serial core code disables clocks
after inactivity.
Background: with new UART idle code, all on-chip UARTs are idled using
a configurable inactivity timer (default 5 seconds.) After the
inactivity timer, UART clocks are disabled automatically.
Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
.ctrl_name = "internal",
};
-static struct omap_uart_config ams_delta_uart_config __initdata = {
- .enabled_uarts = 1,
-};
-
static struct omap_usb_config ams_delta_usb_config __initdata = {
.register_host = 1,
.hmc_mode = 16,
static struct omap_board_config_kernel ams_delta_config[] = {
{ OMAP_TAG_LCD, &ams_delta_lcd_config },
- { OMAP_TAG_UART, &ams_delta_uart_config },
};
static struct resource ams_delta_kp_resources[] = {
return gpio_get_value(P2_NAND_RB_GPIO_PIN);
}
-static struct omap_uart_config fsample_uart_config __initdata = {
- .enabled_uarts = ((1 << 0) | (1 << 1)),
-};
-
static struct omap_lcd_config fsample_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel fsample_config[] = {
- { OMAP_TAG_UART, &fsample_uart_config },
{ OMAP_TAG_LCD, &fsample_lcd_config },
};
};
#endif
-static struct omap_uart_config generic_uart_config __initdata = {
- .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
static struct omap_board_config_kernel generic_config[] __initdata = {
- { OMAP_TAG_UART, &generic_uart_config },
};
static void __init omap_generic_init(void)
.pins[1] = 3,
};
-static struct omap_uart_config h2_uart_config __initdata = {
- .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
static struct omap_lcd_config h2_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel h2_config[] __initdata = {
- { OMAP_TAG_UART, &h2_uart_config },
{ OMAP_TAG_LCD, &h2_lcd_config },
};
.pins[1] = 3,
};
-static struct omap_uart_config h3_uart_config __initdata = {
- .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
static struct omap_lcd_config h3_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel h3_config[] __initdata = {
- { OMAP_TAG_UART, &h3_uart_config },
{ OMAP_TAG_LCD, &h3_lcd_config },
};
}
#endif
-static struct omap_uart_config innovator_uart_config __initdata = {
- .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
static struct omap_board_config_kernel innovator_config[] = {
{ OMAP_TAG_LCD, NULL },
- { OMAP_TAG_UART, &innovator_uart_config },
};
static void __init innovator_init(void)
.pins[0] = 2,
};
-static struct omap_uart_config osk_uart_config __initdata = {
- .enabled_uarts = (1 << 0),
-};
-
#ifdef CONFIG_OMAP_OSK_MISTRAL
static struct omap_lcd_config osk_lcd_config __initdata = {
.ctrl_name = "internal",
#endif
static struct omap_board_config_kernel osk_config[] __initdata = {
- { OMAP_TAG_UART, &osk_uart_config },
#ifdef CONFIG_OMAP_OSK_MISTRAL
{ OMAP_TAG_LCD, &osk_lcd_config },
#endif
.ctrl_name = "internal",
};
-static struct omap_uart_config palmte_uart_config __initdata = {
- .enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
-};
-
#ifdef CONFIG_APM
/*
* Values measured in 10 minute intervals averaged over 10 samples.
static struct omap_board_config_kernel palmte_config[] __initdata = {
{ OMAP_TAG_LCD, &palmte_lcd_config },
- { OMAP_TAG_UART, &palmte_uart_config },
};
static struct spi_board_info palmte_spi_info[] __initdata = {
.ctrl_name = "internal",
};
-static struct omap_uart_config palmtt_uart_config __initdata = {
- .enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
-};
-
static struct omap_board_config_kernel palmtt_config[] __initdata = {
{ OMAP_TAG_LCD, &palmtt_lcd_config },
- { OMAP_TAG_UART, &palmtt_uart_config },
};
static void __init omap_mpu_wdt_mode(int mode) {
.ctrl_name = "internal",
};
-static struct omap_uart_config palmz71_uart_config __initdata = {
- .enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
-};
-
static struct omap_board_config_kernel palmz71_config[] __initdata = {
{OMAP_TAG_LCD, &palmz71_lcd_config},
- {OMAP_TAG_UART, &palmz71_uart_config},
};
static irqreturn_t
return gpio_get_value(P2_NAND_RB_GPIO_PIN);
}
-static struct omap_uart_config perseus2_uart_config __initdata = {
- .enabled_uarts = ((1 << 0) | (1 << 1)),
-};
-
static struct omap_lcd_config perseus2_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel perseus2_config[] __initdata = {
- { OMAP_TAG_UART, &perseus2_uart_config },
{ OMAP_TAG_LCD, &perseus2_lcd_config },
};
};
/*-----------------------------------------*/
-static struct omap_uart_config sx1_uart_config __initdata = {
- .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
static struct omap_board_config_kernel sx1_config[] __initdata = {
{ OMAP_TAG_LCD, &sx1_lcd_config },
- { OMAP_TAG_UART, &sx1_uart_config },
};
/*-----------------------------------------*/
.pins[2] = 6,
};
-static struct omap_uart_config voiceblue_uart_config __initdata = {
- .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
static struct omap_board_config_kernel voiceblue_config[] = {
- { OMAP_TAG_UART, &voiceblue_uart_config },
};
static void __init voiceblue_init_irq(void)
void __init omap_serial_init(void)
{
int i;
- const struct omap_uart_config *info;
if (cpu_is_omap730()) {
serial_platform_data[0].regshift = 0;
serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16;
}
- info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
- if (info == NULL)
- return;
-
for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
unsigned char reg;
- if (!((1 << i) & info->enabled_uarts)) {
- serial_platform_data[i].membase = NULL;
- serial_platform_data[i].mapbase = 0;
- continue;
- }
-
switch (i) {
case 0:
uart1_ck = clk_get(NULL, "uart1_ck");
omap_gpio_init();
}
-static struct omap_uart_config sdp2430_uart_config __initdata = {
- .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
static struct omap_board_config_kernel sdp2430_config[] = {
- {OMAP_TAG_UART, &sdp2430_uart_config},
{OMAP_TAG_LCD, &sdp2430_lcd_config},
};
omap_gpio_init();
}
-static struct omap_uart_config sdp3430_uart_config __initdata = {
- .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
static struct omap_lcd_config sdp3430_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel sdp3430_config[] __initdata = {
- { OMAP_TAG_UART, &sdp3430_uart_config },
{ OMAP_TAG_LCD, &sdp3430_lcd_config },
};
};
static struct omap_board_config_kernel sdp4430_config[] __initdata = {
- { OMAP_TAG_UART, &sdp4430_uart_config },
{ OMAP_TAG_LCD, &sdp4430_lcd_config },
};
apollon_init_smc91x();
}
-static struct omap_uart_config apollon_uart_config __initdata = {
- .enabled_uarts = (1 << 0) | (0 << 1) | (0 << 2),
-};
-
static struct omap_usb_config apollon_usb_config __initdata = {
.register_dev = 1,
.hmc_mode = 0x14, /* 0:dev 1:host1 2:disable */
};
static struct omap_board_config_kernel apollon_config[] = {
- { OMAP_TAG_UART, &apollon_uart_config },
{ OMAP_TAG_LCD, &apollon_lcd_config },
};
omap_init_irq();
}
-static struct omap_uart_config generic_uart_config __initdata = {
- .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
static struct omap_board_config_kernel generic_config[] = {
- { OMAP_TAG_UART, &generic_uart_config },
};
static void __init omap_generic_init(void)
h4_init_flash();
}
-static struct omap_uart_config h4_uart_config __initdata = {
- .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
static struct omap_lcd_config h4_lcd_config __initdata = {
.ctrl_name = "internal",
};
};
static struct omap_board_config_kernel h4_config[] = {
- { OMAP_TAG_UART, &h4_uart_config },
{ OMAP_TAG_LCD, &h4_lcd_config },
};
ldp_init_smsc911x();
}
-static struct omap_uart_config ldp_uart_config __initdata = {
- .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
static struct platform_device ldp_lcd_device = {
.name = "ldp_lcd",
.id = -1,
};
static struct omap_board_config_kernel ldp_config[] __initdata = {
- { OMAP_TAG_UART, &ldp_uart_config },
{ OMAP_TAG_LCD, &ldp_lcd_config },
};
#include "sdram-micron-mt46h32m32lf-6.h"
-static struct omap_uart_config omap3_beagle_uart_config __initdata = {
- .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
static struct twl4030_hsmmc_info mmc[] = {
{
.mmc = 1,
};
static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
- { OMAP_TAG_UART, &omap3_beagle_uart_config },
{ OMAP_TAG_LCD, &omap3_beagle_lcd_config },
};
gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ);
}
-static struct omap_uart_config omap3_evm_uart_config __initdata = {
- .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
static struct twl4030_hsmmc_info mmc[] = {
{
.mmc = 1,
}
static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
- { OMAP_TAG_UART, &omap3_evm_uart_config },
{ OMAP_TAG_LCD, &omap3_evm_lcd_config },
};
{} /* Terminator */
};
-static struct omap_uart_config omap3pandora_uart_config __initdata = {
- .enabled_uarts = (1 << 2), /* UART3 */
-};
-
static struct regulator_consumer_supply pandora_vmmc1_supply = {
.supply = "vmmc",
};
};
static struct omap_board_config_kernel omap3pandora_config[] __initdata = {
- { OMAP_TAG_UART, &omap3pandora_uart_config },
{ OMAP_TAG_LCD, &omap3pandora_lcd_config },
};
printk(KERN_ERR "Unable to register NAND device\n");
}
}
-static struct omap_uart_config overo_uart_config __initdata = {
- .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
static struct twl4030_hsmmc_info mmc[] = {
{
};
static struct omap_board_config_kernel overo_config[] __initdata = {
- { OMAP_TAG_UART, &overo_uart_config },
{ OMAP_TAG_LCD, &overo_lcd_config },
};
#include <mach/gpmc.h>
#include <mach/usb.h>
-static struct omap_uart_config rx51_uart_config = {
- .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
static struct omap_lcd_config rx51_lcd_config = {
.ctrl_name = "internal",
};
};
static struct omap_board_config_kernel rx51_config[] = {
- { OMAP_TAG_UART, &rx51_uart_config },
{ OMAP_TAG_FBMEM, &rx51_fbmem0_config },
{ OMAP_TAG_FBMEM, &rx51_fbmem1_config },
{ OMAP_TAG_FBMEM, &rx51_fbmem2_config },
omap_gpio_init();
}
-static struct omap_uart_config zoom2_uart_config __initdata = {
- .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
static struct omap_board_config_kernel zoom2_config[] __initdata = {
- { OMAP_TAG_UART, &zoom2_uart_config },
};
static struct twl4030_gpio_platform_data zoom2_gpio_data = {
void __init omap_serial_init(void)
{
int i;
- const struct omap_uart_config *info;
char name[16];
/*
* if not needed.
*/
- info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
-
- if (info == NULL)
- return;
-
for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
struct omap_uart_state *uart = &omap_uart[i];
struct platform_device *pdev = &uart->pdev;
struct device *dev = &pdev->dev;
struct plat_serial8250_port *p = dev->platform_data;
- if (!(info->enabled_uarts & (1 << i))) {
- p->membase = NULL;
- p->mapbase = 0;
- continue;
- }
-
sprintf(name, "uart%d_ick", i+1);
uart->ick = clk_get(NULL, name);
if (IS_ERR(uart->ick)) {
#define OMAP_TAG_CLOCK 0x4f01
#define OMAP_TAG_LCD 0x4f05
#define OMAP_TAG_GPIO_SWITCH 0x4f06
-#define OMAP_TAG_UART 0x4f07
#define OMAP_TAG_FBMEM 0x4f08
#define OMAP_TAG_STI_CONSOLE 0x4f09
#define OMAP_TAG_CAMERA_SENSOR 0x4f0a
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / commitdiff