[ALSA] usb-audio: use 1 ms URBs when capturing
authorClemens Ladisch <clemens@ladisch.de>
Fri, 12 Aug 2005 06:25:26 +0000 (08:25 +0200)
committerJaroslav Kysela <perex@suse.cz>
Tue, 30 Aug 2005 06:45:04 +0000 (08:45 +0200)
USB generic driver
When capturing audio data, we do not know beforehand how many samples
the device sends per frame, so we have to use URBs that are as short as
possible to make sure that we can handle period boundaries without any
additional latencies.

Furthermore, the total count of URBs submitted doesn't matter when
capturing, so we can just use the maximum number.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
sound/usb/usbaudio.c

index 8298c462c291c2a529cecf04f0cb18a0aa213a52..9e38d3d1322a78f6c821b857e473b44a5d8f8a63 100644 (file)
@@ -97,7 +97,7 @@ MODULE_PARM_DESC(async_unlink, "Use async unlink mode.");
 
 #define MAX_PACKS      10
 #define MAX_PACKS_HS   (MAX_PACKS * 8) /* in high speed mode */
-#define MAX_URBS       5       /* max. 20ms long packets */
+#define MAX_URBS       8
 #define SYNC_URBS      4       /* always four urbs for sync */
 #define MIN_PACKS_URB  1       /* minimum 1 packet per urb */
 
@@ -920,10 +920,12 @@ static int init_substream_urbs(snd_usb_substream_t *subs, unsigned int period_by
        else
                subs->curpacksize = maxsize;
 
-       if (snd_usb_get_speed(subs->dev) == USB_SPEED_FULL)
+       if (is_playback)
                urb_packs = nrpacks;
        else
-               urb_packs = (nrpacks * 8) >> subs->datainterval;
+               urb_packs = 1;
+       if (snd_usb_get_speed(subs->dev) == USB_SPEED_HIGH)
+               urb_packs = (urb_packs * 8) >> subs->datainterval;
 
        /* allocate a temporary buffer for playback */
        if (is_playback) {
@@ -935,9 +937,13 @@ static int init_substream_urbs(snd_usb_substream_t *subs, unsigned int period_by
        }
 
        /* decide how many packets to be used */
-       total_packs = (period_bytes + maxsize - 1) / maxsize;
-       if (total_packs < 2 * MIN_PACKS_URB)
-               total_packs = 2 * MIN_PACKS_URB;
+       if (is_playback) {
+               total_packs = (period_bytes + maxsize - 1) / maxsize;
+               if (total_packs < 2 * MIN_PACKS_URB)
+                       total_packs = 2 * MIN_PACKS_URB;
+       } else {
+               total_packs = MAX_URBS * urb_packs;
+       }
        subs->nurbs = (total_packs + urb_packs - 1) / urb_packs;
        if (subs->nurbs > MAX_URBS) {
                /* too much... */