static int set_gamma(struct fbtft_par *par, unsigned long *curves)
{
unsigned long mask[] = {
- 0b1111, 0b1111, 0b11111, 0b1111, 0b1111, 0b1111, 0b11111,
- 0b111, 0b111, 0b111, 0b111, 0b111, 0b111, 0b11, 0b11,
- 0b1111, 0b1111, 0b11111, 0b1111, 0b1111, 0b1111, 0b11111,
- 0b111, 0b111, 0b111, 0b111, 0b111, 0b111, 0b0, 0b0 };
+ 0x0f, 0x0f, 0x1f, 0x0f, 0x0f, 0x0f, 0x1f, 0x07, 0x07, 0x07,
+ 0x07, 0x07, 0x07, 0x03, 0x03, 0x0f, 0x0f, 0x1f, 0x0f, 0x0f,
+ 0x0f, 0x1f, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x00, 0x00,
+ };
int i, j;
/* apply mask */
static int set_gamma(struct fbtft_par *par, unsigned long *curves)
{
unsigned long mask[] = {
- 0b111111, 0b111111, 0b111111, 0b111111, 0b111111, 0b111111,
- 0b1111111, 0b1111111,
- 0b11111, 0b11111, 0b11111, 0b11111, 0b11111,
- 0b1111};
+ 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x7f, 0x7f, 0x1f, 0x1f,
+ 0x1f, 0x1f, 0x1f, 0x0f,
+ };
int i, j;
int acc = 0;
static int set_gamma(struct fbtft_par *par, unsigned long *curves)
{
unsigned long mask[] = {
- 0b11111, 0b11111, 0b111, 0b111, 0b111,
- 0b111, 0b111, 0b111, 0b111, 0b111,
- 0b11111, 0b11111, 0b111, 0b111, 0b111,
- 0b111, 0b111, 0b111, 0b111, 0b111 };
+ 0x1f, 0x1f, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
+ 0x1f, 0x1f, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
+ };
int i, j;
fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "%s()\n", __func__);
module_param(bt, uint, 0);
MODULE_PARM_DESC(bt, "Sets the factor used in the step-up circuits");
-static unsigned vc = 0b011; /* Vci1=Vci*0.80 */
+static unsigned vc = 0x03; /* Vci1=Vci*0.80 */
module_param(vc, uint, 0);
MODULE_PARM_DESC(vc,
"Sets the ratio factor of Vci to generate the reference voltages Vci1");
-static unsigned vrh = 0b1101; /* VREG1OUT=Vci*1.85 */
+static unsigned vrh = 0x0d; /* VREG1OUT=Vci*1.85 */
module_param(vrh, uint, 0);
MODULE_PARM_DESC(vrh,
"Set the amplifying rate (1.6 ~ 1.9) of Vci applied to output the VREG1OUT");
-static unsigned vdv = 0b10010; /* VCOMH amplitude=VREG1OUT*0.98 */
+static unsigned vdv = 0x12; /* VCOMH amplitude=VREG1OUT*0.98 */
module_param(vdv, uint, 0);
MODULE_PARM_DESC(vdv,
"Select the factor of VREG1OUT to set the amplitude of Vcom");
-static unsigned vcm = 0b001010; /* VCOMH=VREG1OUT*0.735 */
+static unsigned vcm = 0x0a; /* VCOMH=VREG1OUT*0.735 */
module_param(vcm, uint, 0);
MODULE_PARM_DESC(vcm, "Set the internal VcomH voltage");
if (par->gpio.cs != -1)
gpio_set_value(par->gpio.cs, 0); /* Activate chip */
- bt &= 0b111;
- vc &= 0b111;
- vrh &= 0b1111;
- vdv &= 0b11111;
- vcm &= 0b111111;
+ bt &= 0x07;
+ vc &= 0x07;
+ vrh &= 0x0f;
+ vdv &= 0x1f;
+ vcm &= 0x3f;
/* Initialization sequence from ILI9325 Application Notes */
write_reg(par, 0x0013, 0x0000); /* VDV[4:0] for VCOM amplitude */
mdelay(200); /* Dis-charge capacitor power voltage */
write_reg(par, 0x0010, /* SAP, BT[3:0], AP, DSTB, SLP, STB */
- (1 << 12) | (bt << 8) | (1 << 7) | (0b001 << 4));
+ (1 << 12) | (bt << 8) | (1 << 7) | (0x01 << 4));
write_reg(par, 0x0011, 0x220 | vc); /* DC1[2:0], DC0[2:0], VC[2:0] */
mdelay(50); /* Delay 50ms */
write_reg(par, 0x0012, vrh); /* Internal reference voltage= Vci; */
static int set_gamma(struct fbtft_par *par, unsigned long *curves)
{
unsigned long mask[] = {
- 0b11111, 0b11111, 0b111, 0b111, 0b111,
- 0b111, 0b111, 0b111, 0b111, 0b111,
- 0b11111, 0b11111, 0b111, 0b111, 0b111,
- 0b111, 0b111, 0b111, 0b111, 0b111 };
+ 0x1f, 0x1f, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
+ 0x1f, 0x1f, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
+ };
int i, j;
fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "%s()\n", __func__);
static int set_gamma(struct fbtft_par *par, unsigned long *curves)
{
unsigned long mask[] = {
- 0b111111, 0b111111, 0b111111, 0b111111, 0b111111, 0b111111,
- 0b111111, 0b111111, 0b111111, 0b111111, 0b111111, 0b111111,
- 0b11111, 0b11111,
- 0b111111, 0b111111, 0b111111, 0b111111, 0b111111, 0b111111,
- 0b111111, 0b111111, 0b111111, 0b111111, 0b111111, 0b111111,
- 0b11111, 0b11111 };
+ 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f,
+ 0x3f, 0x3f, 0x1f, 0x1f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f,
+ 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x1f, 0x1f,
+ };
int i, j;
fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "%s()\n", __func__);
switch (par->info->var.rotate) {
case 0:
- write_reg(par, 0x11, reg11 | 0b110000);
+ write_reg(par, 0x11, reg11 | 0x30);
break;
case 270:
- write_reg(par, 0x11, reg11 | 0b101000);
+ write_reg(par, 0x11, reg11 | 0x28);
break;
case 180:
- write_reg(par, 0x11, reg11 | 0b000000);
+ write_reg(par, 0x11, reg11 | 0x00);
break;
case 90:
- write_reg(par, 0x11, reg11 | 0b011000);
+ write_reg(par, 0x11, reg11 | 0x18);
break;
}
static int set_gamma(struct fbtft_par *par, unsigned long *curves)
{
unsigned long mask[] = {
- 0b11111, 0b11111, 0b111, 0b111, 0b111,
- 0b111, 0b111, 0b111, 0b111, 0b111,
- 0b11111, 0b11111, 0b111, 0b111, 0b111,
- 0b111, 0b111, 0b111, 0b111, 0b111 };
+ 0x1f, 0x1f, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
+ 0x1f, 0x1f, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
+ };
int i, j;
fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "%s()\n", __func__);
switch (par->info->var.rotate) {
case 0:
- write_reg(par, 0xA0, remap | 0b00 | 1<<4);
+ write_reg(par, 0xA0, remap | 0x00 | 1<<4);
break;
case 270:
- write_reg(par, 0xA0, remap | 0b11 | 1<<4);
+ write_reg(par, 0xA0, remap | 0x03 | 1<<4);
break;
case 180:
- write_reg(par, 0xA0, remap | 0b10);
+ write_reg(par, 0xA0, remap | 0x02);
break;
case 90:
- write_reg(par, 0xA0, remap | 0b01);
+ write_reg(par, 0xA0, remap | 0x01);
break;
}
/* apply mask */
for (i = 0; i < par->gamma.num_curves; i++)
for (j = 0; j < par->gamma.num_values; j++)
- CURVE(i, j) &= 0b111111;
+ CURVE(i, j) &= 0x3f;
for (i = 0; i < par->gamma.num_curves; i++)
write_reg(par, 0xE0 + i,
void fbtft_expand_debug_value(unsigned long *debug)
{
- switch (*debug & 0b111) {
+ switch (*debug & 0x7) {
case 1:
*debug |= DEBUG_LEVEL_1;
break;
.buswidth = 8,
.backlight = 1,
},
- .startbyte = 0b01110000,
+ .startbyte = 0x70,
.bgr = true,
.gpios = (const struct fbtft_gpio []) {
{ "reset", 25 },
.backlight = 1,
.init_sequence = hy28b_init_sequence,
},
- .startbyte = 0b01110000,
+ .startbyte = 0x70,
.bgr = true,
.fps = 50,
.gpios = (const struct fbtft_gpio []) {
.buswidth = 8,
.backlight = 1,
},
- .startbyte = 0b01110000,
+ .startbyte = 0x70,
.bgr = true,
.gpios = (const struct fbtft_gpio []) {
{ "reset", 25 },