ath9k: Move PS wakeup/restore calls from isr to tasklet
authorVasanthakumar Thiagarajan <vasanth@atheros.com>
Fri, 15 May 2009 06:47:16 +0000 (02:47 -0400)
committerJohn W. Linville <linville@tuxdriver.com>
Wed, 20 May 2009 18:46:30 +0000 (14:46 -0400)
We do not need to do this in ath_isr() and it looks like the modified
version ends up being more stable as far as being able receive beacon
frames is concerned. Furthermore, this reduces need to move between
AWAKE and NETWORK SLEEP states when processing some unrelated
interrupts.

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/ath/ath9k/main.c
drivers/net/wireless/ath/ath9k/recv.c

index 0e8f6d41a37504f80d830eaf149673c551409058..c161b75cded6406ae4c5eadabc69ca8a7172a56f 100644 (file)
@@ -455,8 +455,11 @@ static void ath9k_tasklet(unsigned long data)
        struct ath_softc *sc = (struct ath_softc *)data;
        u32 status = sc->intrstatus;
 
+       ath9k_ps_wakeup(sc);
+
        if (status & ATH9K_INT_FATAL) {
                ath_reset(sc, false);
+               ath9k_ps_restore(sc);
                return;
        }
 
@@ -471,6 +474,7 @@ static void ath9k_tasklet(unsigned long data)
 
        /* re-enable hardware interrupt */
        ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
+       ath9k_ps_restore(sc);
 }
 
 irqreturn_t ath_isr(int irq, void *dev)
@@ -498,14 +502,11 @@ irqreturn_t ath_isr(int irq, void *dev)
        if (sc->sc_flags & SC_OP_INVALID)
                return IRQ_NONE;
 
-       ath9k_ps_wakeup(sc);
 
        /* shared irq, not for us */
 
-       if (!ath9k_hw_intrpend(ah)) {
-               ath9k_ps_restore(sc);
+       if (!ath9k_hw_intrpend(ah))
                return IRQ_NONE;
-       }
 
        /*
         * Figure out the reason(s) for the interrupt.  Note
@@ -520,10 +521,8 @@ irqreturn_t ath_isr(int irq, void *dev)
         * If there are no status bits set, then this interrupt was not
         * for me (should have been caught above).
         */
-       if (!status) {
-               ath9k_ps_restore(sc);
+       if (!status)
                return IRQ_NONE;
-       }
 
        /* Cache the status */
        sc->intrstatus = status;
@@ -560,20 +559,17 @@ irqreturn_t ath_isr(int irq, void *dev)
                ath9k_hw_set_interrupts(ah, sc->imask);
        }
 
-       if (status & ATH9K_INT_TIM_TIMER) {
-               if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) {
+       if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
+               if (status & ATH9K_INT_TIM_TIMER) {
                        /* Clear RxAbort bit so that we can
                         * receive frames */
                        ath9k_hw_setpower(ah, ATH9K_PM_AWAKE);
-                       ath9k_hw_setrxabort(ah, 0);
-                       sched = true;
+                       ath9k_hw_setrxabort(sc->sc_ah, 0);
                        sc->sc_flags |= SC_OP_WAIT_FOR_BEACON;
                }
-       }
 
 chip_reset:
 
-       ath9k_ps_restore(sc);
        ath_debug_stat_interrupt(sc, status);
 
        if (sched) {
index 72e9283bcf7b5af3d68cb42f5903645d58358d61..5567517aa6413a39a963b80eba020420e2c60159 100644 (file)
@@ -508,8 +508,6 @@ static bool ath_beacon_dtim_pending_cab(struct sk_buff *skb)
 static void ath_rx_ps_back_to_sleep(struct ath_softc *sc)
 {
        sc->sc_flags &= ~(SC_OP_WAIT_FOR_BEACON | SC_OP_WAIT_FOR_CAB);
-       if (sc->hw->conf.flags & IEEE80211_CONF_PS)
-               ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_NETWORK_SLEEP);
 }
 
 static void ath_rx_ps_beacon(struct ath_softc *sc, struct sk_buff *skb)