[POWERPC] 4xx: Add Kilauea PCIe support to dts and Kconfig
authorStefan Roese <sr@denx.de>
Fri, 7 Dec 2007 09:34:26 +0000 (20:34 +1100)
committerJosh Boyer <jwboyer@linux.vnet.ibm.com>
Sun, 23 Dec 2007 19:31:32 +0000 (13:31 -0600)
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
arch/powerpc/boot/dts/kilauea.dts
arch/powerpc/platforms/40x/Kconfig

index b090940ed4103bebeec13f7723d979bc753e82a1..aa6a51769930e9f5a73638dd0883d55df50e761f 100644 (file)
                                has-new-stacr-staopc;
                        };
                };
+
+               PCIE0: pciex@0a0000000 {
+                       device_type = "pci";
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       #address-cells = <3>;
+                       compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
+                       primary;
+                       port = <0>; /* port number */
+                       reg = <a0000000 20000000        /* Config space access */
+                              ef000000 00001000>;      /* Registers */
+                       dcr-reg = <040 020>;
+                       sdr-base = <400>;
+
+                       /* Outbound ranges, one memory and one IO,
+                        * later cannot be changed
+                        */
+                       ranges = <02000000 0 80000000 90000000 0 08000000
+                                 01000000 0 00000000 e0000000 0 00010000>;
+
+                       /* Inbound 2GB range starting at 0 */
+                       dma-ranges = <42000000 0 0 0 0 80000000>;
+
+                       /* This drives busses 0x00 to 0x0f */
+                       bus-range = <00 0f>;
+
+                       /* Legacy interrupts (note the weird polarity, the bridge seems
+                        * to invert PCIe legacy interrupts).
+                        * We are de-swizzling here because the numbers are actually for
+                        * port of the root complex virtual P2P bridge. But I want
+                        * to avoid putting a node for it in the tree, so the numbers
+                        * below are basically de-swizzled numbers.
+                        * The real slot is on idsel 0, so the swizzling is 1:1
+                        */
+                       interrupt-map-mask = <0000 0 0 7>;
+                       interrupt-map = <
+                               0000 0 0 1 &UIC2 0 4 /* swizzled int A */
+                               0000 0 0 2 &UIC2 1 4 /* swizzled int B */
+                               0000 0 0 3 &UIC2 2 4 /* swizzled int C */
+                               0000 0 0 4 &UIC2 3 4 /* swizzled int D */>;
+               };
+
+               PCIE1: pciex@0c0000000 {
+                       device_type = "pci";
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       #address-cells = <3>;
+                       compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
+                       primary;
+                       port = <1>; /* port number */
+                       reg = <c0000000 20000000        /* Config space access */
+                              ef001000 00001000>;      /* Registers */
+                       dcr-reg = <060 020>;
+                       sdr-base = <440>;
+
+                       /* Outbound ranges, one memory and one IO,
+                        * later cannot be changed
+                        */
+                       ranges = <02000000 0 80000000 98000000 0 08000000
+                                 01000000 0 00000000 e0010000 0 00010000>;
+
+                       /* Inbound 2GB range starting at 0 */
+                       dma-ranges = <42000000 0 0 0 0 80000000>;
+
+                       /* This drives busses 0x10 to 0x1f */
+                       bus-range = <10 1f>;
+
+                       /* Legacy interrupts (note the weird polarity, the bridge seems
+                        * to invert PCIe legacy interrupts).
+                        * We are de-swizzling here because the numbers are actually for
+                        * port of the root complex virtual P2P bridge. But I want
+                        * to avoid putting a node for it in the tree, so the numbers
+                        * below are basically de-swizzled numbers.
+                        * The real slot is on idsel 0, so the swizzling is 1:1
+                        */
+                       interrupt-map-mask = <0000 0 0 7>;
+                       interrupt-map = <
+                               0000 0 0 1 &UIC2 b 4 /* swizzled int A */
+                               0000 0 0 2 &UIC2 c 4 /* swizzled int B */
+                               0000 0 0 3 &UIC2 d 4 /* swizzled int C */
+                               0000 0 0 4 &UIC2 e 4 /* swizzled int D */>;
+               };
        };
 };
index bdc3e8741fc7c665cb2a7411e8e4fb706c56580a..3048bd798b2a36e46215cc63f0a515c9f4c7f994 100644 (file)
@@ -28,6 +28,7 @@ config KILAUEA
        depends on 40x
        default n
        select 405EX
+       select PPC4xx_PCI_EXPRESS
        help
          This option enables support for the AMCC PPC405EX evaluation board.