mtd: nand: remove AG-AND support

We have only one AG-AND driver and it was not touched since 2005. It looks
like AG-AND was not really make it to mass-production and can be considered
a dead technology.

Along with the AG-AND support, this patch removes the BBT_AUTO_REFRESH feature,
because the only user of this feature is AG-AND. And even though it is
implemented as a generic feature, I prefer to remove it because NAND flashes do
not really need it in this form.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 42c63927609dbee8697c691c8e97515cf509b990..7b7ebd5ed430b19e2c14f13e5a6f6a5527886446 100644 (file)
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -4,7 +4,6 @@
  *  Overview:
  *   This is the generic MTD driver for NAND flash devices. It should be
  *   capable of working with almost all NAND chips currently available.
- *   Basic support for AG-AND chips is provided.
  *
  *     Additional technical information is available on
  *     http://www.linux-mtd.infradead.org/doc/nand.html
@@ -22,8 +21,6 @@
  *     Enable cached programming for 2k page size chips
  *     Check, if mtd->ecctype should be set to MTD_ECC_HW
  *     if we have HW ECC support.
- *     The AG-AND chips have nice features for speed improvement,
- *     which are not supported yet. Read / program 4 pages in one go.
  *     BBT table is not serialized, has to be fixed
  *
  * This program is free software; you can redistribute it and/or modify
@@ -836,10 +833,7 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
         */
        ndelay(100);
 
-       if ((state == FL_ERASING) && (chip->options & NAND_IS_AND))
-               chip->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1);
-       else
-               chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
+       chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
 
        if (in_interrupt() || oops_in_progress)
                panic_nand_wait(mtd, chip, timeo);
@@ -2480,24 +2474,6 @@ static void single_erase_cmd(struct mtd_info *mtd, int page)
        chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1);
 }
 
-/**
- * multi_erase_cmd - [GENERIC] AND specific block erase command function
- * @mtd: MTD device structure
- * @page: the page address of the block which will be erased
- *
- * AND multi block erase command function. Erase 4 consecutive blocks.
- */
-static void multi_erase_cmd(struct mtd_info *mtd, int page)
-{
-       struct nand_chip *chip = mtd->priv;
-       /* Send commands to erase a block */
-       chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page++);
-       chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page++);
-       chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page++);
-       chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page);
-       chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1);
-}
-
 /**
  * nand_erase - [MTD Interface] erase block(s)
  * @mtd: MTD device structure
@@ -2510,7 +2486,6 @@ static int nand_erase(struct mtd_info *mtd, struct erase_info *instr)
        return nand_erase_nand(mtd, instr, 0);
 }
 
-#define BBT_PAGE_MASK  0xffffff3f
 /**
  * nand_erase_nand - [INTERN] erase block(s)
  * @mtd: MTD device structure
@@ -2524,8 +2499,6 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
 {
        int page, status, pages_per_block, ret, chipnr;
        struct nand_chip *chip = mtd->priv;
-       loff_t rewrite_bbt[NAND_MAX_CHIPS] = {0};
-       unsigned int bbt_masked_page = 0xffffffff;
        loff_t len;
 
        pr_debug("%s: start = 0x%012llx, len = %llu\n",
@@ -2556,15 +2529,6 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
                goto erase_exit;
        }
 
-       /*
-        * If BBT requires refresh, set the BBT page mask to see if the BBT
-        * should be rewritten. Otherwise the mask is set to 0xffffffff which
-        * can not be matched. This is also done when the bbt is actually
-        * erased to avoid recursive updates.
-        */
-       if (chip->options & BBT_AUTO_REFRESH && !allowbbt)
-               bbt_masked_page = chip->bbt_td->pages[chipnr] & BBT_PAGE_MASK;
-
        /* Loop through the pages */
        len = instr->len;
 
@@ -2610,15 +2574,6 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
                        goto erase_exit;
                }
 
-               /*
-                * If BBT requires refresh, set the BBT rewrite flag to the
-                * page being erased.
-                */
-               if (bbt_masked_page != 0xffffffff &&
-                   (page & BBT_PAGE_MASK) == bbt_masked_page)
-                           rewrite_bbt[chipnr] =
-                                       ((loff_t)page << chip->page_shift);
-
                /* Increment page address and decrement length */
                len -= (1 << chip->phys_erase_shift);
                page += pages_per_block;
@@ -2628,15 +2583,6 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
                        chipnr++;
                        chip->select_chip(mtd, -1);
                        chip->select_chip(mtd, chipnr);
-
-                       /*
-                        * If BBT requires refresh and BBT-PERCHIP, set the BBT
-                        * page mask to see if this BBT should be rewritten.
-                        */
-                       if (bbt_masked_page != 0xffffffff &&
-                           (chip->bbt_td->options & NAND_BBT_PERCHIP))
-                               bbt_masked_page = chip->bbt_td->pages[chipnr] &
-                                       BBT_PAGE_MASK;
                }
        }
        instr->state = MTD_ERASE_DONE;
@@ -2653,23 +2599,6 @@ erase_exit:
        if (!ret)
                mtd_erase_callback(instr);
 
-       /*
-        * If BBT requires refresh and erase was successful, rewrite any
-        * selected bad block tables.
-        */
-       if (bbt_masked_page == 0xffffffff || ret)
-               return ret;
-
-       for (chipnr = 0; chipnr < chip->numchips; chipnr++) {
-               if (!rewrite_bbt[chipnr])
-                       continue;
-               /* Update the BBT for chip */
-               pr_debug("%s: nand_update_bbt (%d:0x%0llx 0x%0x)\n",
-                               __func__, chipnr, rewrite_bbt[chipnr],
-                               chip->bbt_td->pages[chipnr]);
-               nand_update_bbt(mtd, rewrite_bbt[chipnr]);
-       }
-
        /* Return more or less happy */
        return ret;
 }
@@ -3302,12 +3231,7 @@ ident_done:
        }
 
        chip->badblockbits = 8;
-
-       /* Check for AND chips with 4 page planes */
-       if (chip->options & NAND_4PAGE_ARRAY)
-               chip->erase_cmd = multi_erase_cmd;
-       else
-               chip->erase_cmd = single_erase_cmd;
+       chip->erase_cmd = single_erase_cmd;
 
        /* Do not replace user supplied command function! */
        if (mtd->writesize > 512 && chip->cmdfunc == nand_command)

diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index 916d6e9c0ab1d9c5872c0ed66b26832ff4bf9062..267264320e06587cbee58ad5e036a38b90f07fe9 100644 (file)
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -1240,15 +1240,6 @@ int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
  */
 static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
 
-static uint8_t scan_agand_pattern[] = { 0x1C, 0x71, 0xC7, 0x1C, 0x71, 0xC7 };
-
-static struct nand_bbt_descr agand_flashbased = {
-       .options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES,
-       .offs = 0x20,
-       .len = 6,
-       .pattern = scan_agand_pattern
-};
-
 /* Generic flash bbt descriptors */
 static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
 static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' };
@@ -1333,22 +1324,6 @@ int nand_default_bbt(struct mtd_info *mtd)
 {
        struct nand_chip *this = mtd->priv;
 
-       /*
-        * Default for AG-AND. We must use a flash based bad block table as the
-        * devices have factory marked _good_ blocks. Erasing those blocks
-        * leads to loss of the good / bad information, so we _must_ store this
-        * information in a good / bad table during startup.
-        */
-       if (this->options & NAND_IS_AND) {
-               /* Use the default pattern descriptors */
-               if (!this->bbt_td) {
-                       this->bbt_td = &bbt_main_descr;
-                       this->bbt_md = &bbt_mirror_descr;
-               }
-               this->bbt_options |= NAND_BBT_USE_FLASH;
-               return nand_scan_bbt(mtd, &agand_flashbased);
-       }
-
        /* Is a flash based bad block table requested? */
        if (this->bbt_options & NAND_BBT_USE_FLASH) {
                /* Use the default pattern descriptors */

diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index 818bb9e29819162ed74c7ffe65b8cb5e2b93f9ac..a907e47ce668bb3cd8049d143740a47b11187a13 100644 (file)
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -134,19 +134,6 @@ struct nand_flash_dev nand_flash_ids[] = {
        {"NAND 64GiB 1,8V 16-bit",      0x2E, 0, 65536, 0, LP_OPTIONS16},
        {"NAND 64GiB 3,3V 16-bit",      0x4E, 0, 65536, 0, LP_OPTIONS16},
 
-       /*
-        * Renesas AND 1 Gigabit. Those chips do not support extended id and
-        * have a strange page/block layout !  The chosen minimum erasesize is
-        * 4 * 2 * 2048 = 16384 Byte, as those chips have an array of 4 page
-        * planes 1 block = 2 pages, but due to plane arrangement the blocks
-        * 0-3 consists of page 0 + 4,1 + 5, 2 + 6, 3 + 7 Anyway JFFS2 would
-        * increase the eraseblock size so we chose a combined one which can be
-        * erased in one go There are more speed improvements for reads and
-        * writes possible, but not implemented now
-        */
-       {"AND 128MiB 3,3V 8-bit",       0x01, 2048, 128, 0x4000,
-        NAND_IS_AND | NAND_4PAGE_ARRAY | BBT_AUTO_REFRESH},
-
        {NULL,}
 };
 

diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index ef52d9c91459e0204e31c98483922b7ab95b1ebb..7cc299436f94ac910e043a2f81e23ba0c7152e59 100644 (file)
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -171,22 +171,6 @@ typedef enum {
 #define NAND_CACHEPRG          0x00000008
 /* Chip has copy back function */
 #define NAND_COPYBACK          0x00000010
-/*
- * AND Chip which has 4 banks and a confusing page / block
- * assignment. See Renesas datasheet for further information.
- */
-#define NAND_IS_AND            0x00000020
-/*
- * Chip has a array of 4 pages which can be read without
- * additional ready /busy waits.
- */
-#define NAND_4PAGE_ARRAY       0x00000040
-/*
- * Chip requires that BBT is periodically rewritten to prevent
- * bits from adjacent blocks from 'leaking' in altering data.
- * This happens with the Renesas AG-AND chips, possibly others.
- */
-#define BBT_AUTO_REFRESH       0x00000080
 /*
  * Chip requires ready check on read (for auto-incremented sequential read).
  * True only for small page devices; large page devices do not support