drm/i915: Be extra careful about A/D matching for multifunction SDVO

If we're both RGB and TMDS capable, we'll have set up one connector for
each.  When determining connectivity, require analog/digital state in
the EDID block to match analog/digital support in the connector.
Otherwise, both DVI and VGA will appear to be connected.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 5192723637b5da09efbd4db0df7cc46364ed0722..5ad5a098b5bb18f8895eeadc3f32905db1bffb91 100644 (file)
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1504,16 +1504,17 @@ intel_analog_is_connected(struct drm_device *dev)
 }
 
 enum drm_connector_status
-intel_sdvo_hdmi_sink_detect(struct drm_connector *connector, u16 response)
+intel_sdvo_hdmi_sink_detect(struct drm_connector *connector)
 {
        struct drm_encoder *encoder = intel_attached_encoder(connector);
        struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
        struct intel_sdvo_priv *sdvo_priv = intel_encoder->dev_priv;
+       struct intel_connector *intel_connector = to_intel_connector(connector);
+       struct intel_sdvo_connector *sdvo_connector = intel_connector->dev_priv;
        enum drm_connector_status status = connector_status_connected;
        struct edid *edid = NULL;
 
-       edid = drm_get_edid(connector,
-                           intel_encoder->ddc_bus);
+       edid = drm_get_edid(connector, intel_encoder->ddc_bus);
 
        /* This is only applied to SDVO cards with multiple outputs */
        if (edid == NULL && intel_sdvo_multifunc_encoder(intel_encoder)) {
@@ -1526,8 +1527,7 @@ intel_sdvo_hdmi_sink_detect(struct drm_connector *connector, u16 response)
                 */
                while(temp_ddc > 1) {
                        sdvo_priv->ddc_bus = temp_ddc;
-                       edid = drm_get_edid(connector,
-                               intel_encoder->ddc_bus);
+                       edid = drm_get_edid(connector, intel_encoder->ddc_bus);
                        if (edid) {
                                /*
                                 * When we can get the EDID, maybe it is the
@@ -1544,28 +1544,25 @@ intel_sdvo_hdmi_sink_detect(struct drm_connector *connector, u16 response)
        /* when there is no edid and no monitor is connected with VGA
         * port, try to use the CRT ddc to read the EDID for DVI-connector
         */
-       if (edid == NULL &&
-           sdvo_priv->analog_ddc_bus &&
+       if (edid == NULL && sdvo_priv->analog_ddc_bus &&
            !intel_analog_is_connected(connector->dev))
-               edid = drm_get_edid(connector,
-                                   sdvo_priv->analog_ddc_bus);
+               edid = drm_get_edid(connector, sdvo_priv->analog_ddc_bus);
+
        if (edid != NULL) {
-               /* Don't report the output as connected if it's a DVI-I
-                * connector with a non-digital EDID coming out.
-                */
-               if (response & (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1)) {
-                       if (edid->input & DRM_EDID_INPUT_DIGITAL)
-                               sdvo_priv->is_hdmi =
-                                       drm_detect_hdmi_monitor(edid);
-                       else
-                               status = connector_status_disconnected;
-               }
+               bool is_digital = !!(edid->input & DRM_EDID_INPUT_DIGITAL);
+               bool need_digital = !!(sdvo_connector->output_flag & SDVO_TMDS_MASK);
 
-               kfree(edid);
-               connector->display_info.raw_edid = NULL;
+               /* DDC bus is shared, match EDID to connector type */
+               if (is_digital && need_digital)
+                       sdvo_priv->is_hdmi = drm_detect_hdmi_monitor(edid);
+               else if (is_digital != need_digital)
+                       status = connector_status_disconnected;
 
-       } else if (response & (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1))
+               connector->display_info.raw_edid = NULL;
+       } else
                status = connector_status_disconnected;
+       
+       kfree(edid);
 
        return status;
 }
@@ -1601,8 +1598,8 @@ static enum drm_connector_status intel_sdvo_detect(struct drm_connector *connect
 
        if ((sdvo_connector->output_flag & response) == 0)
                ret = connector_status_disconnected;
-       else if (response & (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1))
-               ret = intel_sdvo_hdmi_sink_detect(connector, response);
+       else if (response & SDVO_TMDS_MASK)
+               ret = intel_sdvo_hdmi_sink_detect(connector);
        else
                ret = connector_status_connected;