This patch fixes an interrupt thrash issue with c_can driver.
In c_can_isr() function interrupts are disabled and enabled only in
c_can_poll() function. c_can_isr() & c_can_poll() both read the
irqstatus flag. However, irqstatus is always read as 0 in c_can_poll()
because all C_CAN interrupts are disabled in c_can_isr(). This causes
all interrupts to be re-enabled in c_can_poll() which in turn causes
another interrupt since the event is not really handled. This keeps
happening causing a flood of interrupts.
To fix this, read the irqstatus register in isr and use the same cached
value in the poll function.
Cc: stable@kernel.org # 2.6.39+
Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
struct net_device *dev = napi->dev;
struct c_can_priv *priv = netdev_priv(dev);
- irqstatus = priv->read_reg(priv, &priv->regs->interrupt);
+ irqstatus = priv->irqstatus;
if (!irqstatus)
goto end;
static irqreturn_t c_can_isr(int irq, void *dev_id)
{
- u16 irqstatus;
struct net_device *dev = (struct net_device *)dev_id;
struct c_can_priv *priv = netdev_priv(dev);
- irqstatus = priv->read_reg(priv, &priv->regs->interrupt);
- if (!irqstatus)
+ priv->irqstatus = priv->read_reg(priv, &priv->regs->interrupt);
+ if (!priv->irqstatus)
return IRQ_NONE;
/* disable all interrupts and schedule the NAPI */
unsigned int tx_next;
unsigned int tx_echo;
void *priv; /* for board-specific data */
+ u16 irqstatus;
};
struct net_device *alloc_c_can_dev(void);