#include <linux/types.h>
#include <linux/i2c.h>
+/**
+ * struct drxk_config - Configure the initial parameters for DRX-K
+ *
+ * adr: I2C Address of the DRX-K
+ * single_master: Device is on the single master mode
+ * no_i2c_bridge: Don't switch the I2C bridge to talk with tuner
+ * antenna_uses_gpio: Use GPIO to control the antenna
+ * antenna_dvbc: GPIO for changing antenna to DVB-C
+ * antenna_dvbt: GPIO for changing antenna to DVB-T
+ * microcode_name: Name of the firmware file with the microcode
+ */
struct drxk_config {
- u8 adr;
- u32 single_master : 1;
- u32 no_i2c_bridge : 1;
+ u8 adr;
+ bool single_master;
+ bool no_i2c_bridge;
+
+ bool antenna_uses_gpio;
+ u16 antenna_dvbc, antenna_dvbt;
+
const char *microcode_name;
};
static int init_state(struct drxk_state *state)
{
+ /*
+ * FIXME: most (all?) of the values bellow should be moved into
+ * struct drxk_config, as they are probably board-specific
+ */
u32 ulVSBIfAgcMode = DRXK_AGC_CTRL_AUTO;
u32 ulVSBIfAgcOutputLevel = 0;
u32 ulVSBIfAgcMinLevel = 0;
u32 ulRfMirror = 1;
u32 ulPowerDown = 0;
- u32 ulAntennaDVBT = 1;
- u32 ulAntennaDVBC = 0;
- u32 ulAntennaSwitchDVBTDVBC = 0;
-
dprintk(1, "\n");
state->m_hasLNA = false;
state->m_GPIOCfg = (ulGPIOCfg);
state->m_GPIO = (ulGPIO == 0 ? 0 : 1);
- state->m_AntennaDVBT = (ulAntennaDVBT == 0 ? 0 : 1);
- state->m_AntennaDVBC = (ulAntennaDVBC == 0 ? 0 : 1);
- state->m_AntennaSwitchDVBTDVBC =
- (ulAntennaSwitchDVBTDVBC == 0 ? 0 : 1);
-
state->m_bPowerDown = false;
state->m_currentPowerMode = DRX_POWER_DOWN;
static int SwitchAntennaToQAM(struct drxk_state *state)
{
- int status = -EINVAL;
+ int status = 0;
dprintk(1, "\n");
+
if (state->m_AntennaSwitchDVBTDVBC != 0) {
if (state->m_GPIO != state->m_AntennaDVBC) {
state->m_GPIO = state->m_AntennaDVBC;
static int SwitchAntennaToDVBT(struct drxk_state *state)
{
- int status = -EINVAL;
+ int status = 0;
dprintk(1, "\n");
if (state->m_AntennaSwitchDVBTDVBC != 0) {
state->single_master = config->single_master;
state->microcode_name = config->microcode_name;
state->no_i2c_bridge = config->no_i2c_bridge;
+ state->m_AntennaSwitchDVBTDVBC = config->antenna_uses_gpio;
+ state->m_AntennaDVBC = config->antenna_dvbc;
+ state->m_AntennaDVBT = config->antenna_dvbt;
mutex_init(&state->mutex);
mutex_init(&state->ctlock);
u8 m_deviceSpin;
u32 m_iqmRcRate;
- u16 m_AntennaDVBC;
- u16 m_AntennaDVBT;
- u16 m_AntennaSwitchDVBTDVBC;
-
enum DRXPowerMode m_currentPowerMode;
/* Configurable parameters at the driver */
+ bool m_AntennaSwitchDVBTDVBC;
+ u16 m_AntennaDVBC;
+ u16 m_AntennaDVBT;
+
u32 single_master : 1; /* Use single master i2c mode */
u32 no_i2c_bridge : 1; /* Tuner is not on port 1, don't use I2C bridge */
+
const char *microcode_name;
};