[SCSI] zfcp: Defer resource allocation to first ccw_set_online call
authorChristof Schmitt <christof.schmitt@de.ibm.com>
Tue, 18 Aug 2009 13:43:27 +0000 (15:43 +0200)
committerJames Bottomley <James.Bottomley@suse.de>
Sat, 5 Sep 2009 13:49:41 +0000 (08:49 -0500)
So far, zfcp allocated all resources required for FCP
adapters/subchannels when the device was discovered in the ccw_probe
callback. If there are lots of unused FCP subchannels attached to a
system, this is a waste of resources. To alleviate this, defer the
resource allocation to the first call to ccw_set_online. To avoid
disruptions during possible following calls to ccw_set_offline and
then ccw_set_online, keep the adapter resources until the device is
finally being removed via ccw_remove. While doing this, also manage
the zfcp erp thread together with all other adapter resources in
zfcp_adapter_enqueue/dequeue.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
drivers/s390/scsi/zfcp_aux.c
drivers/s390/scsi/zfcp_ccw.c
drivers/s390/scsi/zfcp_erp.c

index e8f39f02bc3b7ae666e87f5e6b8d93cd14109650..d1e75d36ed1ade052ba6e1763083e23284f56c17 100644 (file)
@@ -541,6 +541,9 @@ int zfcp_adapter_enqueue(struct ccw_device *ccw_device)
        rwlock_init(&adapter->erp_lock);
        rwlock_init(&adapter->abort_lock);
 
+       if (zfcp_erp_thread_setup(adapter))
+               goto erp_thread_failed;
+
        INIT_WORK(&adapter->stat_work, _zfcp_status_read_scheduler);
        INIT_WORK(&adapter->scan_work, _zfcp_fc_scan_ports_later);
 
@@ -561,6 +564,8 @@ int zfcp_adapter_enqueue(struct ccw_device *ccw_device)
                return 0;
 
 sysfs_failed:
+       zfcp_erp_thread_kill(adapter);
+erp_thread_failed:
        zfcp_fc_gs_destroy(adapter);
 generic_services_failed:
        zfcp_destroy_adapter_work_queue(adapter);
@@ -602,6 +607,7 @@ void zfcp_adapter_dequeue(struct zfcp_adapter *adapter)
                return;
 
        zfcp_fc_gs_destroy(adapter);
+       zfcp_erp_thread_kill(adapter);
        zfcp_destroy_adapter_work_queue(adapter);
        zfcp_dbf_adapter_unregister(adapter->dbf);
        zfcp_free_low_mem_buffers(adapter);
index d9da5c42ccbe6ca617bf4f304f0f9ecb1c058ef2..82ae6ed7ef83a823dc70fe8941137df73151b15b 100644 (file)
@@ -18,6 +18,9 @@ static int zfcp_ccw_suspend(struct ccw_device *cdev)
 {
        struct zfcp_adapter *adapter = dev_get_drvdata(&cdev->dev);
 
+       if (!adapter)
+               return 0;
+
        down(&zfcp_data.config_sema);
 
        zfcp_erp_adapter_shutdown(adapter, 0, "ccsusp1", NULL);
@@ -33,6 +36,9 @@ static int zfcp_ccw_activate(struct ccw_device *cdev)
 {
        struct zfcp_adapter *adapter = dev_get_drvdata(&cdev->dev);
 
+       if (!adapter)
+               return 0;
+
        zfcp_erp_modify_adapter_status(adapter, "ccresu1", NULL,
                                       ZFCP_STATUS_COMMON_RUNNING, ZFCP_SET);
        zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED,
@@ -63,25 +69,14 @@ int zfcp_ccw_priv_sch(struct zfcp_adapter *adapter)
  * zfcp_ccw_probe - probe function of zfcp driver
  * @ccw_device: pointer to belonging ccw device
  *
- * This function gets called by the common i/o layer and sets up the initial
- * data structures for each fcp adapter, which was detected by the system.
- * Also the sysfs files for this adapter will be created by this function.
- * In addition the nameserver port will be added to the ports of the adapter
- * and its sysfs representation will be created too.
+ * This function gets called by the common i/o layer for each FCP
+ * device found on the current system. This is only a stub to make cio
+ * work: To only allocate adapter resources for devices actually used,
+ * the allocation is deferred to the first call to ccw_set_online.
  */
 static int zfcp_ccw_probe(struct ccw_device *ccw_device)
 {
-       int retval = 0;
-
-       down(&zfcp_data.config_sema);
-       if (zfcp_adapter_enqueue(ccw_device)) {
-               dev_err(&ccw_device->dev,
-                       "Setting up data structures for the "
-                       "FCP adapter failed\n");
-               retval = -EINVAL;
-       }
-       up(&zfcp_data.config_sema);
-       return retval;
+       return 0;
 }
 
 /**
@@ -102,8 +97,11 @@ static void zfcp_ccw_remove(struct ccw_device *ccw_device)
        LIST_HEAD(port_remove_lh);
 
        ccw_device_set_offline(ccw_device);
+
        down(&zfcp_data.config_sema);
        adapter = dev_get_drvdata(&ccw_device->dev);
+       if (!adapter)
+               goto out;
 
        write_lock_irq(&zfcp_data.config_lock);
        list_for_each_entry_safe(port, p, &adapter->port_list_head, list) {
@@ -129,6 +127,7 @@ static void zfcp_ccw_remove(struct ccw_device *ccw_device)
        wait_event(adapter->remove_wq, atomic_read(&adapter->refcount) == 0);
        zfcp_adapter_dequeue(adapter);
 
+out:
        up(&zfcp_data.config_sema);
 }
 
@@ -136,22 +135,33 @@ static void zfcp_ccw_remove(struct ccw_device *ccw_device)
  * zfcp_ccw_set_online - set_online function of zfcp driver
  * @ccw_device: pointer to belonging ccw device
  *
- * This function gets called by the common i/o layer and sets an adapter
- * into state online. Setting an fcp device online means that it will be
- * registered with the SCSI stack, that the QDIO queues will be set up
- * and that the adapter will be opened (asynchronously).
+ * This function gets called by the common i/o layer and sets an
+ * adapter into state online.  The first call will allocate all
+ * adapter resources that will be retained until the device is removed
+ * via zfcp_ccw_remove.
+ *
+ * Setting an fcp device online means that it will be registered with
+ * the SCSI stack, that the QDIO queues will be set up and that the
+ * adapter will be opened.
  */
 static int zfcp_ccw_set_online(struct ccw_device *ccw_device)
 {
        struct zfcp_adapter *adapter;
-       int retval;
+       int ret = 0;
 
        down(&zfcp_data.config_sema);
        adapter = dev_get_drvdata(&ccw_device->dev);
 
-       retval = zfcp_erp_thread_setup(adapter);
-       if (retval)
-               goto out;
+       if (!adapter) {
+               ret = zfcp_adapter_enqueue(ccw_device);
+               if (ret) {
+                       dev_err(&ccw_device->dev,
+                               "Setting up data structures for the "
+                               "FCP adapter failed\n");
+                       goto out;
+               }
+               adapter = dev_get_drvdata(&ccw_device->dev);
+       }
 
        /* initialize request counter */
        BUG_ON(!zfcp_reqlist_isempty(adapter));
@@ -162,13 +172,11 @@ static int zfcp_ccw_set_online(struct ccw_device *ccw_device)
        zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED,
                                "ccsonl2", NULL);
        zfcp_erp_wait(adapter);
+out:
        up(&zfcp_data.config_sema);
-       flush_work(&adapter->scan_work);
-       return 0;
-
- out:
-       up(&zfcp_data.config_sema);
-       return retval;
+       if (!ret)
+               flush_work(&adapter->scan_work);
+       return ret;
 }
 
 /**
@@ -184,10 +192,13 @@ static int zfcp_ccw_set_offline(struct ccw_device *ccw_device)
 
        down(&zfcp_data.config_sema);
        adapter = dev_get_drvdata(&ccw_device->dev);
+       if (!adapter)
+               goto out;
+
        zfcp_erp_adapter_shutdown(adapter, 0, "ccsoff1", NULL);
        zfcp_erp_wait(adapter);
-       zfcp_erp_thread_kill(adapter);
        up(&zfcp_data.config_sema);
+out:
        return 0;
 }
 
@@ -244,6 +255,7 @@ static void zfcp_ccw_shutdown(struct ccw_device *cdev)
        adapter = dev_get_drvdata(&cdev->dev);
        zfcp_erp_adapter_shutdown(adapter, 0, "ccshut1", NULL);
        zfcp_erp_wait(adapter);
+       zfcp_erp_thread_kill(adapter);
        up(&zfcp_data.config_sema);
 }
 
index 577e15708598272ac50b591198ef7db7f130e09c..73d366ba31e593755d2854d4591888b9e949bba9 100644 (file)
@@ -150,6 +150,9 @@ static int zfcp_erp_required_act(int want, struct zfcp_adapter *adapter,
                a_status = atomic_read(&adapter->status);
                if (a_status & ZFCP_STATUS_COMMON_ERP_INUSE)
                        return 0;
+               if (!(a_status & ZFCP_STATUS_COMMON_RUNNING) &&
+                   !(a_status & ZFCP_STATUS_COMMON_OPEN))
+                       return 0; /* shutdown requested for closed adapter */
        }
 
        return need;
@@ -1349,6 +1352,8 @@ void zfcp_erp_thread_kill(struct zfcp_adapter *adapter)
 {
        kthread_stop(adapter->erp_thread);
        adapter->erp_thread = NULL;
+       WARN_ON(!list_empty(&adapter->erp_ready_head));
+       WARN_ON(!list_empty(&adapter->erp_running_head));
 }
 
 /**