#include <linux/err.h>
#include <linux/opp.h>
#include <linux/export.h>
+#include <linux/suspend.h>
#include <plat/omap-pm.h>
#include <plat/omap_device.h>
#include "common.h"
+#include "prcm-common.h"
#include "voltage.h"
#include "powerdomain.h"
#include "clockdomain.h"
static struct omap_device_pm_latency *pm_lats;
+/*
+ * omap_pm_suspend: points to a function that does the SoC-specific
+ * suspend work
+ */
+int (*omap_pm_suspend)(void);
+
static int __init _init_omap_device(char *name)
{
struct omap_hwmod *oh;
return ret;
}
+
+
/*
* This API is to be called during init to set the various voltage
* domains to the voltage as per the opp table. Typically we boot up
return -EINVAL;
}
+#ifdef CONFIG_SUSPEND
+static int omap_pm_enter(suspend_state_t suspend_state)
+{
+ int ret = 0;
+
+ if (!omap_pm_suspend)
+ return -ENOENT; /* XXX doublecheck */
+
+ switch (suspend_state) {
+ case PM_SUSPEND_STANDBY:
+ case PM_SUSPEND_MEM:
+ ret = omap_pm_suspend();
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static int omap_pm_begin(suspend_state_t state)
+{
+ disable_hlt();
+ if (cpu_is_omap34xx())
+ omap_prcm_irq_prepare();
+ return 0;
+}
+
+static void omap_pm_end(void)
+{
+ enable_hlt();
+ return;
+}
+
+static void omap_pm_finish(void)
+{
+ if (cpu_is_omap34xx())
+ omap_prcm_irq_complete();
+}
+
+static const struct platform_suspend_ops omap_pm_ops = {
+ .begin = omap_pm_begin,
+ .end = omap_pm_end,
+ .enter = omap_pm_enter,
+ .finish = omap_pm_finish,
+ .valid = suspend_valid_only_mem,
+};
+
+#endif /* CONFIG_SUSPEND */
+
static void __init omap3_init_voltages(void)
{
if (!cpu_is_omap34xx())
/* Smartreflex device init */
omap_devinit_smartreflex();
+#ifdef CONFIG_SUSPEND
+ suspend_set_ops(&omap_pm_ops);
+#endif
+
return 0;
}
late_initcall(omap2_common_pm_late_init);
extern int omap3_idle_init(void);
extern int omap4_idle_init(void);
extern int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused);
+extern int (*omap_pm_suspend)(void);
#if defined(CONFIG_PM_OPP)
extern int omap3_opp_init(void);
#include "powerdomain.h"
#include "clockdomain.h"
-#ifdef CONFIG_SUSPEND
-static suspend_state_t suspend_state = PM_SUSPEND_ON;
-static inline bool is_suspending(void)
-{
- return (suspend_state != PM_SUSPEND_ON);
-}
-#else
-static inline bool is_suspending(void)
-{
- return false;
-}
-#endif
-
static void (*omap2_sram_idle)(void);
static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
void __iomem *sdrc_power);
return (f1 | f2) ? 1 : 0;
}
-static void omap2_enter_full_retention(void)
+static int omap2_enter_full_retention(void)
{
u32 l;
/* Mask future PRCM-to-MPU interrupts */
omap2_prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+
+ return 0;
}
static int omap2_i2c_active(void)
local_fiq_enable();
}
-#ifdef CONFIG_SUSPEND
-static int omap2_pm_begin(suspend_state_t state)
-{
- disable_hlt();
- suspend_state = state;
- return 0;
-}
-
-static int omap2_pm_enter(suspend_state_t state)
-{
- int ret = 0;
-
- switch (state) {
- case PM_SUSPEND_STANDBY:
- case PM_SUSPEND_MEM:
- omap2_enter_full_retention();
- break;
- default:
- ret = -EINVAL;
- }
-
- return ret;
-}
-
-static void omap2_pm_end(void)
-{
- suspend_state = PM_SUSPEND_ON;
- enable_hlt();
-}
-
-static const struct platform_suspend_ops omap_pm_ops = {
- .begin = omap2_pm_begin,
- .enter = omap2_pm_enter,
- .end = omap2_pm_end,
- .valid = suspend_valid_only_mem,
-};
-#else
-static const struct platform_suspend_ops __initdata omap_pm_ops;
-#endif /* CONFIG_SUSPEND */
-
static void __init prcm_setup_regs(void)
{
int i, num_mem_banks;
clkdm_for_each(omap_pm_clkdms_setup, NULL);
clkdm_add_wkdep(mpu_clkdm, wkup_clkdm);
+#ifdef CONFIG_SUSPEND
+ omap_pm_suspend = omap2_enter_full_retention;
+#endif
+
/* REVISIT: Configure number of 32 kHz clock cycles for sys_clk
* stabilisation */
omap2_prm_write_mod_reg(15 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
omap24xx_cpu_suspend_sz);
}
- suspend_set_ops(&omap_pm_ops);
arm_pm_idle = omap2_pm_idle;
return 0;
#include "sdrc.h"
#include "control.h"
-#ifdef CONFIG_SUSPEND
-static suspend_state_t suspend_state = PM_SUSPEND_ON;
-#endif
-
/* pm34xx errata defined in pm.h */
u16 pm34xx_errata;
return ret;
}
-static int omap3_pm_enter(suspend_state_t unused)
-{
- int ret = 0;
-
- switch (suspend_state) {
- case PM_SUSPEND_STANDBY:
- case PM_SUSPEND_MEM:
- ret = omap3_pm_suspend();
- break;
- default:
- ret = -EINVAL;
- }
-
- return ret;
-}
-
-/* Hooks to enable / disable UART interrupts during suspend */
-static int omap3_pm_begin(suspend_state_t state)
-{
- disable_hlt();
- suspend_state = state;
- omap_prcm_irq_prepare();
- return 0;
-}
-
-static void omap3_pm_end(void)
-{
- suspend_state = PM_SUSPEND_ON;
- enable_hlt();
- return;
-}
-
-static void omap3_pm_finish(void)
-{
- omap_prcm_irq_complete();
-}
-
-static const struct platform_suspend_ops omap_pm_ops = {
- .begin = omap3_pm_begin,
- .end = omap3_pm_end,
- .enter = omap3_pm_enter,
- .finish = omap3_pm_finish,
- .valid = suspend_valid_only_mem,
-};
#endif /* CONFIG_SUSPEND */
core_clkdm = clkdm_lookup("core_clkdm");
#ifdef CONFIG_SUSPEND
- suspend_set_ops(&omap_pm_ops);
-#endif /* CONFIG_SUSPEND */
+ omap_pm_suspend = omap3_pm_suspend;
+#endif
arm_pm_idle = omap3_pm_idle;
omap3_idle_init();
return 0;
}
-
-static int omap4_pm_enter(suspend_state_t suspend_state)
-{
- int ret = 0;
-
- switch (suspend_state) {
- case PM_SUSPEND_STANDBY:
- case PM_SUSPEND_MEM:
- ret = omap4_pm_suspend();
- break;
- default:
- ret = -EINVAL;
- }
-
- return ret;
-}
-
-static int omap4_pm_begin(suspend_state_t state)
-{
- disable_hlt();
- return 0;
-}
-
-static void omap4_pm_end(void)
-{
- enable_hlt();
- return;
-}
-
-static const struct platform_suspend_ops omap_pm_ops = {
- .begin = omap4_pm_begin,
- .end = omap4_pm_end,
- .enter = omap4_pm_enter,
- .valid = suspend_valid_only_mem,
-};
#endif /* CONFIG_SUSPEND */
static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
(void) clkdm_for_each(omap_pm_clkdms_setup, NULL);
#ifdef CONFIG_SUSPEND
- suspend_set_ops(&omap_pm_ops);
-#endif /* CONFIG_SUSPEND */
+ omap_pm_suspend = omap4_pm_suspend;
+#endif
/* Overwrite the default cpu_do_idle() */
arm_pm_idle = omap_default_idle;