Also make ath5k and ath9k use it, and share register definitions.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
obj-$(CONFIG_AR9170_USB) += ar9170/
obj-$(CONFIG_ATH_COMMON) += ath.o
-ath-objs := main.o regd.o
+
+ath-objs := main.o \
+ regd.o \
+ hw.o
};
struct ath_common {
+ void *ah;
u16 cachelsz;
u16 curaid;
u8 macaddr[ETH_ALEN];
u32 len,
gfp_t gfp_mask);
+void ath_hw_setbssidmask(struct ath_common *common);
+
#endif /* ATH_H */
/* BSSID Functions */
extern int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac);
extern void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id);
-extern int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask);
+extern void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask);
/* Receive start/stop functions */
extern void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah);
extern void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah);
int ath5k_hw_attach(struct ath5k_softc *sc)
{
struct ath5k_hw *ah = sc->ah;
- struct ath_common *common;
+ struct ath_common *common = ath5k_hw_common(ah);
struct pci_dev *pdev = sc->pdev;
struct ath5k_eeprom_info *ee;
int ret;
sc->ah->ah_iobase = sc->iobase;
common = ath5k_hw_common(sc->ah);
common->ops = &ath5k_common_ops;
+ common->ah = sc->ah;
common->cachelsz = csz << 2; /* convert to bytes */
/* Initialize device */
{ AR5K_SLEEP0, 0x0002aaaa },
{ AR5K_SLEEP1, 0x02005555 },
{ AR5K_SLEEP2, 0x00000000 },
- { AR5K_BSS_IDM0, 0xffffffff },
- { AR5K_BSS_IDM1, 0x0000ffff },
+ { AR_BSSMSKL, 0xffffffff },
+ { AR_BSSMSKU, 0x0000ffff },
{ AR5K_TXPC, 0x00000000 },
{ AR5K_PROFCNT_TX, 0x00000000 },
{ AR5K_PROFCNT_RX, 0x00000000 },
*/
if (ah->ah_version == AR5K_AR5212) {
ath5k_hw_reg_write(ah, get_unaligned_le32(common->bssidmask),
- AR5K_BSS_IDM0);
+ AR_BSSMSKL);
ath5k_hw_reg_write(ah,
get_unaligned_le16(common->curbssid + 4),
- AR5K_BSS_IDM1);
+ AR_BSSMSKU);
}
/*
*/
low_id = get_unaligned_le32(bssid);
high_id = get_unaligned_le16(bssid);
- ath5k_hw_reg_write(ah, low_id, AR5K_BSS_ID0);
+ ath5k_hw_reg_write(ah, low_id, AR_BSSMSKL);
ath5k_hw_reg_write(ah, high_id | ((assoc_id & 0x3fff) <<
- AR5K_BSS_ID1_AID_S), AR5K_BSS_ID1);
+ AR5K_BSS_ID1_AID_S), AR_BSSMSKU);
if (assoc_id == 0) {
ath5k_hw_disable_pspoll(ah);
ath5k_hw_enable_pspoll(ah, NULL, 0);
}
-/**
- * ath5k_hw_set_bssid_mask - filter out bssids we listen
- *
- * @ah: the &struct ath5k_hw
- * @mask: the bssid_mask, a u8 array of size ETH_ALEN
- *
- * BSSID masking is a method used by AR5212 and newer hardware to inform PCU
- * which bits of the interface's MAC address should be looked at when trying
- * to decide which packets to ACK. In station mode and AP mode with a single
- * BSS every bit matters since we lock to only one BSS. In AP mode with
- * multiple BSSes (virtual interfaces) not every bit matters because hw must
- * accept frames for all BSSes and so we tweak some bits of our mac address
- * in order to have multiple BSSes.
- *
- * NOTE: This is a simple filter and does *not* filter out all
- * relevant frames. Some frames that are not for us might get ACKed from us
- * by PCU because they just match the mask.
- *
- * When handling multiple BSSes you can get the BSSID mask by computing the
- * set of ~ ( MAC XOR BSSID ) for all bssids we handle.
- *
- * When you do this you are essentially computing the common bits of all your
- * BSSes. Later it is assumed the harware will "and" (&) the BSSID mask with
- * the MAC address to obtain the relevant bits and compare the result with
- * (frame's BSSID & mask) to see if they match.
- */
-/*
- * Simple example: on your card you have have two BSSes you have created with
- * BSSID-01 and BSSID-02. Lets assume BSSID-01 will not use the MAC address.
- * There is another BSSID-03 but you are not part of it. For simplicity's sake,
- * assuming only 4 bits for a mac address and for BSSIDs you can then have:
- *
- * \
- * MAC: 0001 |
- * BSSID-01: 0100 | --> Belongs to us
- * BSSID-02: 1001 |
- * /
- * -------------------
- * BSSID-03: 0110 | --> External
- * -------------------
- *
- * Our bssid_mask would then be:
- *
- * On loop iteration for BSSID-01:
- * ~(0001 ^ 0100) -> ~(0101)
- * -> 1010
- * bssid_mask = 1010
- *
- * On loop iteration for BSSID-02:
- * bssid_mask &= ~(0001 ^ 1001)
- * bssid_mask = (1010) & ~(0001 ^ 1001)
- * bssid_mask = (1010) & ~(1001)
- * bssid_mask = (1010) & (0110)
- * bssid_mask = 0010
- *
- * A bssid_mask of 0010 means "only pay attention to the second least
- * significant bit". This is because its the only bit common
- * amongst the MAC and all BSSIDs we support. To findout what the real
- * common bit is we can simply "&" the bssid_mask now with any BSSID we have
- * or our MAC address (we assume the hardware uses the MAC address).
- *
- * Now, suppose there's an incoming frame for BSSID-03:
- *
- * IFRAME-01: 0110
- *
- * An easy eye-inspeciton of this already should tell you that this frame
- * will not pass our check. This is beacuse the bssid_mask tells the
- * hardware to only look at the second least significant bit and the
- * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB
- * as 1, which does not match 0.
- *
- * So with IFRAME-01 we *assume* the hardware will do:
- *
- * allow = (IFRAME-01 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
- * --> allow = (0110 & 0010) == (0010 & 0001) ? 1 : 0;
- * --> allow = (0010) == 0000 ? 1 : 0;
- * --> allow = 0
- *
- * Lets now test a frame that should work:
- *
- * IFRAME-02: 0001 (we should allow)
- *
- * allow = (0001 & 1010) == 1010
- *
- * allow = (IFRAME-02 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
- * --> allow = (0001 & 0010) == (0010 & 0001) ? 1 :0;
- * --> allow = (0010) == (0010)
- * --> allow = 1
- *
- * Other examples:
- *
- * IFRAME-03: 0100 --> allowed
- * IFRAME-04: 1001 --> allowed
- * IFRAME-05: 1101 --> allowed but its not for us!!!
- *
- */
-int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask)
+void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask)
{
struct ath_common *common = ath5k_hw_common(ah);
- u32 low_id, high_id;
ATH5K_TRACE(ah->ah_sc);
/* Cache bssid mask so that we can restore it
* on reset */
memcpy(common->bssidmask, mask, ETH_ALEN);
- if (ah->ah_version == AR5K_AR5212) {
- low_id = get_unaligned_le32(mask);
- high_id = get_unaligned_le16(mask + 4);
-
- ath5k_hw_reg_write(ah, low_id, AR5K_BSS_IDM0);
- ath5k_hw_reg_write(ah, high_id, AR5K_BSS_IDM1);
-
- return 0;
- }
-
- return -EIO;
+ if (ah->ah_version == AR5K_AR5212)
+ ath_hw_setbssidmask(common);
}
-
/************\
* RX Control *
\************/
* released by Atheros and on various debug messages found on the net.
*/
-
+#include "../reg.h"
/*====MAC DMA REGISTERS====*/
#define AR5K_SLEEP2_DTIM_PER 0xffff0000 /* Mask for DTIM period (?) */
#define AR5K_SLEEP2_DTIM_PER_S 16
-/*
- * BSSID mask registers
- */
-#define AR5K_BSS_IDM0 0x80e0 /* Upper bits */
-#define AR5K_BSS_IDM1 0x80e4 /* Lower bits */
-
/*
* TX power control (TPC) register
*
| ah->sta_id1_defaults);
ath9k_hw_set_operating_mode(ah, ah->opmode);
- ath9k_hw_setbssidmask(ah);
+ ath_hw_setbssidmask(common);
REG_WRITE(ah, AR_DEF_ANTENNA, saveDefAntenna);
REG_WRITE(ah, AR_MCAST_FIL1, filter1);
}
-void ath9k_hw_setbssidmask(struct ath_hw *ah)
-{
- struct ath_common *common = ath9k_hw_common(ah);
-
- REG_WRITE(ah, AR_BSSMSKL, get_unaligned_le32(common->bssidmask));
- REG_WRITE(ah, AR_BSSMSKU, get_unaligned_le16(common->bssidmask + 4));
-}
-
void ath9k_hw_write_associd(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
common = ath9k_hw_common(ah);
common->ops = &ath9k_common_ops;
+ common->ah = ah;
/*
* Cache line size is used to size and align various
/* configure bssid mask */
if (ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK)
- ath9k_hw_setbssidmask(ah);
+ ath_hw_setbssidmask(common);
/* configure operational mode */
ath9k_hw_setopmode(ah);
#ifndef REG_H
#define REG_H
+#include "../reg.h"
+
#define AR_CR 0x0008
#define AR_CR_RXE 0x00000004
#define AR_CR_RXD 0x00000020
#define AR_SLEEP2_BEACON_TIMEOUT 0xFFE00000
#define AR_SLEEP2_BEACON_TIMEOUT_S 21
-#define AR_BSSMSKL 0x80e0
-#define AR_BSSMSKU 0x80e4
-
#define AR_TPC 0x80e8
#define AR_TPC_ACK 0x0000003f
#define AR_TPC_ACK_S 0x00
common->bssidmask[4] = ~mask[4];
common->bssidmask[5] = ~mask[5];
- ath9k_hw_setbssidmask(sc->sc_ah);
+ ath_hw_setbssidmask(common);
}
int ath9k_wiphy_add(struct ath_softc *sc)
--- /dev/null
+/*
+ * Copyright (c) 2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <asm/unaligned.h>
+
+#include "ath.h"
+#include "reg.h"
+
+#define REG_READ common->ops->read
+#define REG_WRITE common->ops->write
+
+/**
+ * ath_hw_set_bssid_mask - filter out bssids we listen
+ *
+ * @common: the ath_common struct for the device.
+ *
+ * BSSID masking is a method used by AR5212 and newer hardware to inform PCU
+ * which bits of the interface's MAC address should be looked at when trying
+ * to decide which packets to ACK. In station mode and AP mode with a single
+ * BSS every bit matters since we lock to only one BSS. In AP mode with
+ * multiple BSSes (virtual interfaces) not every bit matters because hw must
+ * accept frames for all BSSes and so we tweak some bits of our mac address
+ * in order to have multiple BSSes.
+ *
+ * NOTE: This is a simple filter and does *not* filter out all
+ * relevant frames. Some frames that are not for us might get ACKed from us
+ * by PCU because they just match the mask.
+ *
+ * When handling multiple BSSes you can get the BSSID mask by computing the
+ * set of ~ ( MAC XOR BSSID ) for all bssids we handle.
+ *
+ * When you do this you are essentially computing the common bits of all your
+ * BSSes. Later it is assumed the harware will "and" (&) the BSSID mask with
+ * the MAC address to obtain the relevant bits and compare the result with
+ * (frame's BSSID & mask) to see if they match.
+ *
+ * Simple example: on your card you have have two BSSes you have created with
+ * BSSID-01 and BSSID-02. Lets assume BSSID-01 will not use the MAC address.
+ * There is another BSSID-03 but you are not part of it. For simplicity's sake,
+ * assuming only 4 bits for a mac address and for BSSIDs you can then have:
+ *
+ * \
+ * MAC: 0001 |
+ * BSSID-01: 0100 | --> Belongs to us
+ * BSSID-02: 1001 |
+ * /
+ * -------------------
+ * BSSID-03: 0110 | --> External
+ * -------------------
+ *
+ * Our bssid_mask would then be:
+ *
+ * On loop iteration for BSSID-01:
+ * ~(0001 ^ 0100) -> ~(0101)
+ * -> 1010
+ * bssid_mask = 1010
+ *
+ * On loop iteration for BSSID-02:
+ * bssid_mask &= ~(0001 ^ 1001)
+ * bssid_mask = (1010) & ~(0001 ^ 1001)
+ * bssid_mask = (1010) & ~(1001)
+ * bssid_mask = (1010) & (0110)
+ * bssid_mask = 0010
+ *
+ * A bssid_mask of 0010 means "only pay attention to the second least
+ * significant bit". This is because its the only bit common
+ * amongst the MAC and all BSSIDs we support. To findout what the real
+ * common bit is we can simply "&" the bssid_mask now with any BSSID we have
+ * or our MAC address (we assume the hardware uses the MAC address).
+ *
+ * Now, suppose there's an incoming frame for BSSID-03:
+ *
+ * IFRAME-01: 0110
+ *
+ * An easy eye-inspeciton of this already should tell you that this frame
+ * will not pass our check. This is beacuse the bssid_mask tells the
+ * hardware to only look at the second least significant bit and the
+ * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB
+ * as 1, which does not match 0.
+ *
+ * So with IFRAME-01 we *assume* the hardware will do:
+ *
+ * allow = (IFRAME-01 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
+ * --> allow = (0110 & 0010) == (0010 & 0001) ? 1 : 0;
+ * --> allow = (0010) == 0000 ? 1 : 0;
+ * --> allow = 0
+ *
+ * Lets now test a frame that should work:
+ *
+ * IFRAME-02: 0001 (we should allow)
+ *
+ * allow = (0001 & 1010) == 1010
+ *
+ * allow = (IFRAME-02 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
+ * --> allow = (0001 & 0010) == (0010 & 0001) ? 1 :0;
+ * --> allow = (0010) == (0010)
+ * --> allow = 1
+ *
+ * Other examples:
+ *
+ * IFRAME-03: 0100 --> allowed
+ * IFRAME-04: 1001 --> allowed
+ * IFRAME-05: 1101 --> allowed but its not for us!!!
+ *
+ */
+void ath_hw_setbssidmask(struct ath_common *common)
+{
+ void *ah = common->ah;
+
+ REG_WRITE(ah, get_unaligned_le32(common->bssidmask), AR_BSSMSKL);
+ REG_WRITE(ah, get_unaligned_le16(common->bssidmask + 4), AR_BSSMSKU);
+}
+EXPORT_SYMBOL(ath_hw_setbssidmask);
--- /dev/null
+/*
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef ATH_REGISTERS_H
+#define ATH_REGISTERS_H
+
+/*
+ * BSSID mask registers. See ath_hw_set_bssid_mask()
+ * for detailed documentation about these registers.
+ */
+#define AR_BSSMSKL 0x80e0
+#define AR_BSSMSKU 0x80e4
+
+#endif /* ATH_REGISTERS_H */
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff