solos-pci: add firmware upgrade support for new models
authorNathan Williams <nathan@traverse.com.au>
Wed, 19 Dec 2012 11:01:20 +0000 (11:01 +0000)
committerDavid S. Miller <davem@davemloft.net>
Wed, 19 Dec 2012 22:53:53 +0000 (14:53 -0800)
Signed-off-by: Nathan Williams <nathan@traverse.com.au>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/atm/solos-pci.c

index 50e5c561b7c42cc8106cff2bf02e25956a41944d..aa4f35d52a92b9acc46af8913e7cb4d4bd30e2e5 100644 (file)
@@ -42,7 +42,8 @@
 #include <linux/swab.h>
 #include <linux/slab.h>
 
-#define VERSION "0.07"
+#define VERSION "1.04"
+#define DRIVER_VERSION 0x01
 #define PTAG "solos-pci"
 
 #define CONFIG_RAM_SIZE        128
 #define FPGA_MODE      0x5C
 #define FLASH_MODE     0x58
 #define GPIO_STATUS    0x54
+#define DRIVER_VER     0x50
 #define TX_DMA_ADDR(port)      (0x40 + (4 * (port)))
 #define RX_DMA_ADDR(port)      (0x30 + (4 * (port)))
 
 #define DATA_RAM_SIZE  32768
 #define BUF_SIZE       2048
 #define OLD_BUF_SIZE   4096 /* For FPGA versions <= 2*/
-#define FPGA_PAGE      528 /* FPGA flash page size*/
-#define SOLOS_PAGE     512 /* Solos flash page size*/
-#define FPGA_BLOCK     (FPGA_PAGE * 8) /* FPGA flash block size*/
-#define SOLOS_BLOCK    (SOLOS_PAGE * 8) /* Solos flash block size*/
+/* Old boards use ATMEL AD45DB161D flash */
+#define ATMEL_FPGA_PAGE        528 /* FPGA flash page size*/
+#define ATMEL_SOLOS_PAGE       512 /* Solos flash page size*/
+#define ATMEL_FPGA_BLOCK       (ATMEL_FPGA_PAGE * 8) /* FPGA block size*/
+#define ATMEL_SOLOS_BLOCK      (ATMEL_SOLOS_PAGE * 8) /* Solos block size*/
+/* Current boards use M25P/M25PE SPI flash */
+#define SPI_FLASH_BLOCK        (256 * 64)
 
 #define RX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2)
 #define TX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2 + (card->buffer_size))
@@ -128,6 +133,7 @@ struct solos_card {
        int using_dma;
        int fpga_version;
        int buffer_size;
+       int atmel_flash;
 };
 
 
@@ -630,16 +636,25 @@ static int flash_upgrade(struct solos_card *card, int chip)
        switch (chip) {
        case 0:
                fw_name = "solos-FPGA.bin";
-               blocksize = FPGA_BLOCK;
+               if (card->atmel_flash)
+                       blocksize = ATMEL_FPGA_BLOCK;
+               else
+                       blocksize = SPI_FLASH_BLOCK;
                break;
        case 1:
                fw_name = "solos-Firmware.bin";
-               blocksize = SOLOS_BLOCK;
+               if (card->atmel_flash)
+                       blocksize = ATMEL_SOLOS_BLOCK;
+               else
+                       blocksize = SPI_FLASH_BLOCK;
                break;
        case 2:
                if (card->fpga_version > LEGACY_BUFFERS){
                        fw_name = "solos-db-FPGA.bin";
-                       blocksize = FPGA_BLOCK;
+                       if (card->atmel_flash)
+                               blocksize = ATMEL_FPGA_BLOCK;
+                       else
+                               blocksize = SPI_FLASH_BLOCK;
                } else {
                        dev_info(&card->dev->dev, "FPGA version doesn't support"
                                        " daughter board upgrades\n");
@@ -649,7 +664,10 @@ static int flash_upgrade(struct solos_card *card, int chip)
        case 3:
                if (card->fpga_version > LEGACY_BUFFERS){
                        fw_name = "solos-Firmware.bin";
-                       blocksize = SOLOS_BLOCK;
+                       if (card->atmel_flash)
+                               blocksize = ATMEL_SOLOS_BLOCK;
+                       else
+                               blocksize = SPI_FLASH_BLOCK;
                } else {
                        dev_info(&card->dev->dev, "FPGA version doesn't support"
                                        " daughter board upgrades\n");
@@ -665,6 +683,9 @@ static int flash_upgrade(struct solos_card *card, int chip)
 
        dev_info(&card->dev->dev, "Flash upgrade starting\n");
 
+       /* New FPGAs require driver version before permitting flash upgrades */
+       iowrite32(DRIVER_VERSION, card->config_regs + DRIVER_VER);
+
        numblocks = fw->size / blocksize;
        dev_info(&card->dev->dev, "Firmware size: %zd\n", fw->size);
        dev_info(&card->dev->dev, "Number of blocks: %d\n", numblocks);
@@ -694,9 +715,13 @@ static int flash_upgrade(struct solos_card *card, int chip)
                /* dev_info(&card->dev->dev, "Set FPGA Flash mode to Block Write\n"); */
                iowrite32(((chip * 2) + 1), card->config_regs + FLASH_MODE);
 
-               /* Copy block to buffer, swapping each 16 bits */
+               /* Copy block to buffer, swapping each 16 bits for Atmel flash */
                for(i = 0; i < blocksize; i += 4) {
-                       uint32_t word = swahb32p((uint32_t *)(fw->data + offset + i));
+                       uint32_t word;
+                       if (card->atmel_flash)
+                               word = swahb32p((uint32_t *)(fw->data + offset + i));
+                       else
+                               word = *(uint32_t *)(fw->data + offset + i);
                        if(card->fpga_version > LEGACY_BUFFERS)
                                iowrite32(word, FLASH_BUF + i);
                        else
@@ -1230,6 +1255,12 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
                db_fpga_upgrade = db_firmware_upgrade = 0;
        }
 
+       /* Stopped using Atmel flash after 0.03-38 */
+       if (fpga_ver < 39)
+               card->atmel_flash = 1;
+       else
+               card->atmel_flash = 0;
+
        if (card->fpga_version >= DMA_SUPPORTED) {
                pci_set_master(dev);
                card->using_dma = 1;