V4L/DVB (10130): use USB API functions rather than constants
authorJulia Lawall <julia@diku.dk>
Tue, 30 Dec 2008 00:49:22 +0000 (21:49 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Tue, 30 Dec 2008 11:40:40 +0000 (09:40 -0200)
This set of patches introduces calls to the following set of functions:

usb_endpoint_dir_in(epd)
usb_endpoint_dir_out(epd)
usb_endpoint_is_bulk_in(epd)
usb_endpoint_is_bulk_out(epd)
usb_endpoint_is_int_in(epd)
usb_endpoint_is_int_out(epd)
usb_endpoint_is_isoc_in(epd)
usb_endpoint_is_isoc_out(epd)
usb_endpoint_num(epd)
usb_endpoint_type(epd)
usb_endpoint_xfer_bulk(epd)
usb_endpoint_xfer_control(epd)
usb_endpoint_xfer_int(epd)
usb_endpoint_xfer_isoc(epd)

In some cases, introducing one of these functions is not possible, and it
just replaces an explicit integer value by one of the following constants:

USB_ENDPOINT_XFER_BULK
USB_ENDPOINT_XFER_CONTROL
USB_ENDPOINT_XFER_INT
USB_ENDPOINT_XFER_ISOC

An extract of the semantic patch that makes these changes is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r1@ struct usb_endpoint_descriptor *epd; @@

- ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) ==
- \(USB_ENDPOINT_XFER_CONTROL\|0\))
+ usb_endpoint_xfer_control(epd)

@r5@ struct usb_endpoint_descriptor *epd; @@

- ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) ==
-  \(USB_DIR_IN\|0x80\))
+ usb_endpoint_dir_in(epd)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/video/em28xx/em28xx-cards.c
drivers/media/video/stk-webcam.c
drivers/media/video/usbvideo/ibmcam.c
drivers/media/video/usbvideo/konicawc.c
drivers/media/video/usbvideo/quickcam_messenger.c
drivers/media/video/usbvideo/ultracam.c
drivers/media/video/usbvideo/vicam.c
drivers/media/video/usbvision/usbvision-video.c

index 84191c9dc54d9febd94adfdb6e53392e091ca0b2..e776699b62f958ebcc54989751f32908f22d991c 100644 (file)
@@ -1981,8 +1981,8 @@ static int em28xx_usb_probe(struct usb_interface *interface,
        endpoint = &interface->cur_altsetting->endpoint[0].desc;
 
        /* check if the device has the iso in endpoint at the correct place */
-       if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
-           USB_ENDPOINT_XFER_ISOC &&
+       if (usb_endpoint_xfer_isoc(endpoint)
+           &&
            (interface->altsetting[1].endpoint[0].desc.wMaxPacketSize == 940)) {
                /* It's a newer em2874/em2875 device */
                isoc_pipe = 0;
@@ -1990,11 +1990,11 @@ static int em28xx_usb_probe(struct usb_interface *interface,
                int check_interface = 1;
                isoc_pipe = 1;
                endpoint = &interface->cur_altsetting->endpoint[1].desc;
-               if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) !=
+               if (usb_endpoint_type(endpoint) !=
                    USB_ENDPOINT_XFER_ISOC)
                        check_interface = 0;
 
-               if ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT)
+               if (usb_endpoint_dir_out(endpoint))
                        check_interface = 0;
 
                if (!check_interface) {
index 5566c2379d64ee0ae405665e827b9cf7bd27eb59..f9516d0f3c1121ee2122cb01ef51b9e6465434f3 100644 (file)
@@ -1396,12 +1396,9 @@ static int stk_camera_probe(struct usb_interface *interface,
                endpoint = &iface_desc->endpoint[i].desc;
 
                if (!dev->isoc_ep
-                       && ((endpoint->bEndpointAddress
-                               & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
-                       && ((endpoint->bmAttributes
-                               & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_ISOC)) {
+                       && usb_endpoint_is_isoc_in(endpoint)) {
                        /* we found an isoc in endpoint */
-                       dev->isoc_ep = (endpoint->bEndpointAddress & 0xF);
+                       dev->isoc_ep = usb_endpoint_num(endpoint);
                        break;
                }
        }
index c710bcd1df48a7ba8f122c8ff3efce75af9b7488..f8d85ddb48048b6eb320d2cabdcdd5f929a5ea2c 100644 (file)
@@ -3779,11 +3779,11 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id *
                        err("Alternate settings have different endpoint addresses!");
                        return -ENODEV;
                }
-               if ((endpoint->bmAttributes & 0x03) != 0x01) {
+               if (usb_endpoint_type(endpoint) != USB_ENDPOINT_XFER_ISOC) {
                        err("Interface %d. has non-ISO endpoint!", ifnum);
                        return -ENODEV;
                }
-               if ((endpoint->bEndpointAddress & 0x80) == 0) {
+               if (usb_endpoint_dir_out(endpoint)) {
                        err("Interface %d. has ISO OUT endpoint!", ifnum);
                        return -ENODEV;
                }
index da27a5287983f79716bf61543b1cfe834d03188a..90f0ce6a26bc017de47bc3f8bb8c762121abf001 100644 (file)
@@ -823,12 +823,12 @@ static int konicawc_probe(struct usb_interface *intf, const struct usb_device_id
                        err("Alternate settings have different endpoint addresses!");
                        return -ENODEV;
                }
-               if ((endpoint->bmAttributes & 0x03) != 0x01) {
+               if (usb_endpoint_type(endpoint) != USB_ENDPOINT_XFER_ISOC) {
                        err("Interface %d. has non-ISO endpoint!",
                            interface->desc.bInterfaceNumber);
                        return -ENODEV;
                }
-               if ((endpoint->bEndpointAddress & 0x80) == 0) {
+               if (usb_endpoint_dir_out(endpoint)) {
                        err("Interface %d. has ISO OUT endpoint!",
                            interface->desc.bInterfaceNumber);
                        return -ENODEV;
index 606402a54eba5f25b6385323f23f184b58ff2cf0..fd112f0b9d35e7082b113c37ca549c59d547c546 100644 (file)
@@ -955,8 +955,7 @@ static int qcm_probe(struct usb_interface *intf,
                for (j=0; j < interface->desc.bNumEndpoints; j++) {
                        endpoint = &interface->endpoint[j].desc;
 
-                       if ((endpoint->bEndpointAddress &
-                               USB_ENDPOINT_DIR_MASK) != USB_DIR_IN)
+                       if (usb_endpoint_dir_out(endpoint))
                                continue; /* not input then not good */
 
                        buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
@@ -965,9 +964,7 @@ static int qcm_probe(struct usb_interface *intf,
                                continue; /* 0 pkt size is not what we want */
                        }
 
-                       if ((endpoint->bmAttributes &
-                               USB_ENDPOINT_XFERTYPE_MASK) ==
-                               USB_ENDPOINT_XFER_ISOC) {
+                       if (usb_endpoint_xfer_isoc(endpoint)) {
                                video_ep = endpoint->bEndpointAddress;
                                /* break out of the search */
                                goto good_videoep;
index 9714baab7833b61a696ce5120427c42c0a9aa7cd..839a08240c2579f96768e0d544b13e873f857b51 100644 (file)
@@ -556,12 +556,12 @@ static int ultracam_probe(struct usb_interface *intf, const struct usb_device_id
                        err("Alternate settings have different endpoint addresses!");
                        return -ENODEV;
                }
-               if ((endpoint->bmAttributes & 0x03) != 0x01) {
+               if (usb_endpoint_type(endpoint) != USB_ENDPOINT_XFER_ISOC) {
                        err("Interface %d. has non-ISO endpoint!",
                            interface->desc.bInterfaceNumber);
                        return -ENODEV;
                }
-               if ((endpoint->bEndpointAddress & 0x80) == 0) {
+               if (usb_endpoint_dir_out(endpoint)) {
                        err("Interface %d. has ISO OUT endpoint!",
                            interface->desc.bInterfaceNumber);
                        return -ENODEV;
index 8e2d58bec48120c1991c78fd3f8be963c5095f47..4602597ed8d1af301b198dfb7dfe8f97994f5614 100644 (file)
@@ -844,8 +844,7 @@ vicam_probe( struct usb_interface *intf, const struct usb_device_id *id)
               interface->desc.bInterfaceNumber, (unsigned) (interface->desc.bNumEndpoints));
        endpoint = &interface->endpoint[0].desc;
 
-       if ((endpoint->bEndpointAddress & 0x80) &&
-           ((endpoint->bmAttributes & 3) == 0x02)) {
+       if (usb_endpoint_is_bulk_in(endpoint)) {
                /* we found a bulk in endpoint */
                bulkEndpoint = endpoint->bEndpointAddress;
        } else {
index 48c8c4399eb8ec5a26eb643c24b81c864fb9c182..85661b1848fe5cb52111c50b65b56c93372070b8 100644 (file)
@@ -1679,7 +1679,7 @@ static int __devinit usbvision_probe(struct usb_interface *intf,
                interface = &dev->actconfig->interface[ifnum]->altsetting[0];
        }
        endpoint = &interface->endpoint[1].desc;
-       if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) !=
+       if (usb_endpoint_type(endpoint) !=
            USB_ENDPOINT_XFER_ISOC) {
                err("%s: interface %d. has non-ISO endpoint!",
                    __func__, ifnum);
@@ -1687,8 +1687,7 @@ static int __devinit usbvision_probe(struct usb_interface *intf,
                    __func__, endpoint->bmAttributes);
                return -ENODEV;
        }
-       if ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ==
-           USB_DIR_OUT) {
+       if (usb_endpoint_dir_out(endpoint)) {
                err("%s: interface %d. has ISO OUT endpoint!",
                    __func__, ifnum);
                return -ENODEV;