[PATCH] EDAC: probe1 cleanup 1-of-2
authorDoug Thompson <norsk5@xmission.com>
Fri, 30 Jun 2006 08:56:08 +0000 (01:56 -0700)
committerLinus Torvalds <torvalds@g5.osdl.org>
Fri, 30 Jun 2006 18:25:39 +0000 (11:25 -0700)
- Add lower-level functions that handle various parts of the initialization
  done by the xxx_probe1() functions.  Some of the xxx_probe1() functions are
  much too long and complicated (see "Chapter 5: Functions" in
  Documentation/CodingStyle).

- Cleanup of probe1() functions in EDAC

Signed-off-by: Doug Thompson <norsk5@xmission.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
drivers/edac/amd76x_edac.c
drivers/edac/e752x_edac.c
drivers/edac/e7xxx_edac.c
drivers/edac/i82860_edac.c
drivers/edac/i82875p_edac.c
drivers/edac/r82600_edac.c

index 303cb500b377707ee95200a7023d31b7a03c60d6..702141c5501b079a0dcc196daae729cf1ce16bfd 100644 (file)
@@ -182,6 +182,38 @@ static void amd76x_check(struct mem_ctl_info *mci)
        amd76x_process_error_info(mci, &info, 1);
 }
 
+static void amd76x_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev,
+               enum edac_type edac_mode)
+{
+       struct csrow_info *csrow;
+       u32 mba, mba_base, mba_mask, dms;
+       int index;
+
+       for (index = 0; index < mci->nr_csrows; index++) {
+               csrow = &mci->csrows[index];
+
+               /* find the DRAM Chip Select Base address and mask */
+               pci_read_config_dword(pdev,
+                                     AMD76X_MEM_BASE_ADDR + (index * 4),
+                                     &mba);
+
+               if (!(mba & BIT(0)))
+                       continue;
+
+               mba_base = mba & 0xff800000UL;
+               mba_mask = ((mba & 0xff80) << 16) | 0x7fffffUL;
+               pci_read_config_dword(pdev, AMD76X_DRAM_MODE_STATUS, &dms);
+               csrow->first_page = mba_base >> PAGE_SHIFT;
+               csrow->nr_pages = (mba_mask + 1) >> PAGE_SHIFT;
+               csrow->last_page = csrow->first_page + csrow->nr_pages - 1;
+               csrow->page_mask = mba_mask >> PAGE_SHIFT;
+               csrow->grain = csrow->nr_pages << PAGE_SHIFT;
+               csrow->mtype = MEM_RDDR;
+               csrow->dtype = ((dms >> index) & 0x1) ? DEV_X4 : DEV_UNKNOWN;
+               csrow->edac_mode = edac_mode;
+       }
+}
+
 /**
  *     amd76x_probe1   -       Perform set up for detected device
  *     @pdev; PCI device detected
@@ -193,15 +225,13 @@ static void amd76x_check(struct mem_ctl_info *mci)
  */
 static int amd76x_probe1(struct pci_dev *pdev, int dev_idx)
 {
-       int rc = -ENODEV;
-       int index;
-       struct mem_ctl_info *mci = NULL;
-       enum edac_type ems_modes[] = {
+       static const enum edac_type ems_modes[] = {
                EDAC_NONE,
                EDAC_EC,
                EDAC_SECDED,
                EDAC_SECDED
        };
+       struct mem_ctl_info *mci = NULL;
        u32 ems;
        u32 ems_mode;
        struct amd76x_error_info discard;
@@ -212,8 +242,7 @@ static int amd76x_probe1(struct pci_dev *pdev, int dev_idx)
        mci = edac_mc_alloc(0, AMD76X_NR_CSROWS, AMD76X_NR_CHANS);
 
        if (mci == NULL) {
-               rc = -ENOMEM;
-               goto fail;
+               return -ENOMEM;
        }
 
        debugf0("%s(): mci = %p\n", __func__, mci);
@@ -228,33 +257,7 @@ static int amd76x_probe1(struct pci_dev *pdev, int dev_idx)
        mci->edac_check = amd76x_check;
        mci->ctl_page_to_phys = NULL;
 
-       for (index = 0; index < mci->nr_csrows; index++) {
-               struct csrow_info *csrow = &mci->csrows[index];
-               u32 mba;
-               u32 mba_base;
-               u32 mba_mask;
-               u32 dms;
-
-               /* find the DRAM Chip Select Base address and mask */
-               pci_read_config_dword(pdev,
-                               AMD76X_MEM_BASE_ADDR + (index * 4), &mba);
-
-               if (!(mba & BIT(0)))
-                       continue;
-
-               mba_base = mba & 0xff800000UL;
-               mba_mask = ((mba & 0xff80) << 16) | 0x7fffffUL;
-               pci_read_config_dword(pdev, AMD76X_DRAM_MODE_STATUS, &dms);
-               csrow->first_page = mba_base >> PAGE_SHIFT;
-               csrow->nr_pages = (mba_mask + 1) >> PAGE_SHIFT;
-               csrow->last_page = csrow->first_page + csrow->nr_pages - 1;
-               csrow->page_mask = mba_mask >> PAGE_SHIFT;
-               csrow->grain = csrow->nr_pages << PAGE_SHIFT;
-               csrow->mtype = MEM_RDDR;
-               csrow->dtype = ((dms >> index) & 0x1) ? DEV_X4 : DEV_UNKNOWN;
-               csrow->edac_mode = ems_modes[ems_mode];
-       }
-
+       amd76x_init_csrows(mci, pdev, ems_modes[ems_mode]);
        amd76x_get_error_info(mci, &discard);  /* clear counters */
 
        /* Here we assume that we will never see multiple instances of this
@@ -270,9 +273,8 @@ static int amd76x_probe1(struct pci_dev *pdev, int dev_idx)
        return 0;
 
 fail:
-       if (mci != NULL)
-               edac_mc_free(mci);
-       return rc;
+       edac_mc_free(mci);
+       return -ENODEV;
 }
 
 /* returns count (>= 0), or negative on error */
index 5e773e382e8a92ab39c9eb634c6b46b3304a314f..5351a76739e53c892e2ce5c409979c6739e48faa 100644 (file)
@@ -765,22 +765,174 @@ static void e752x_check(struct mem_ctl_info *mci)
        e752x_process_error_info(mci, &info, 1);
 }
 
-static int e752x_probe1(struct pci_dev *pdev, int dev_idx)
+/* Return 1 if dual channel mode is active.  Else return 0. */
+static inline int dual_channel_active(u16 ddrcsr)
+{
+       return (((ddrcsr >> 12) & 3) == 3);
+}
+
+static void e752x_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev,
+               u16 ddrcsr)
+{
+       struct csrow_info *csrow;
+       unsigned long last_cumul_size;
+       int index, mem_dev, drc_chan;
+       int drc_drbg;  /* DRB granularity 0=64mb, 1=128mb */
+       int drc_ddim;  /* DRAM Data Integrity Mode 0=none, 2=edac */
+       u8 value;
+       u32 dra, drc, cumul_size;
+
+       pci_read_config_dword(pdev, E752X_DRA, &dra);
+       pci_read_config_dword(pdev, E752X_DRC, &drc);
+       drc_chan = dual_channel_active(ddrcsr);
+       drc_drbg = drc_chan + 1;  /* 128 in dual mode, 64 in single */
+       drc_ddim = (drc >> 20) & 0x3;
+
+       /* The dram row boundary (DRB) reg values are boundary address for
+        * each DRAM row with a granularity of 64 or 128MB (single/dual
+        * channel operation).  DRB regs are cumulative; therefore DRB7 will
+        * contain the total memory contained in all eight rows.
+        */
+       for (last_cumul_size = index = 0; index < mci->nr_csrows; index++) {
+               /* mem_dev 0=x8, 1=x4 */
+               mem_dev = (dra >> (index * 4 + 2)) & 0x3;
+               csrow = &mci->csrows[index];
+
+               mem_dev = (mem_dev == 2);
+               pci_read_config_byte(pdev, E752X_DRB + index, &value);
+               /* convert a 128 or 64 MiB DRB to a page size. */
+               cumul_size = value << (25 + drc_drbg - PAGE_SHIFT);
+               debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index,
+                       cumul_size);
+               if (cumul_size == last_cumul_size)
+                       continue;       /* not populated */
+
+               csrow->first_page = last_cumul_size;
+               csrow->last_page = cumul_size - 1;
+               csrow->nr_pages = cumul_size - last_cumul_size;
+               last_cumul_size = cumul_size;
+               csrow->grain = 1 << 12; /* 4KiB - resolution of CELOG */
+               csrow->mtype = MEM_RDDR;        /* only one type supported */
+               csrow->dtype = mem_dev ? DEV_X4 : DEV_X8;
+
+               /*
+                * if single channel or x8 devices then SECDED
+                * if dual channel and x4 then S4ECD4ED
+                */
+               if (drc_ddim) {
+                       if (drc_chan && mem_dev) {
+                               csrow->edac_mode = EDAC_S4ECD4ED;
+                               mci->edac_cap |= EDAC_FLAG_S4ECD4ED;
+                       } else {
+                               csrow->edac_mode = EDAC_SECDED;
+                               mci->edac_cap |= EDAC_FLAG_SECDED;
+                       }
+               } else
+                       csrow->edac_mode = EDAC_NONE;
+       }
+}
+
+static void e752x_init_mem_map_table(struct pci_dev *pdev,
+               struct e752x_pvt *pvt)
 {
-       int rc = -ENODEV;
        int index;
+       u8 value, last, row, stat8;
+
+       last = 0;
+       row = 0;
+
+       for (index = 0; index < 8; index += 2) {
+               pci_read_config_byte(pdev, E752X_DRB + index, &value);
+               /* test if there is a dimm in this slot */
+               if (value == last) {
+                       /* no dimm in the slot, so flag it as empty */
+                       pvt->map[index] = 0xff;
+                       pvt->map[index + 1] = 0xff;
+               } else {        /* there is a dimm in the slot */
+                       pvt->map[index] = row;
+                       row++;
+                       last = value;
+                       /* test the next value to see if the dimm is double
+                        * sided
+                        */
+                       pci_read_config_byte(pdev, E752X_DRB + index + 1,
+                                            &value);
+                       pvt->map[index + 1] = (value == last) ?
+                           0xff :      /* the dimm is single sided,
+                                          so flag as empty */
+                           row;        /* this is a double sided dimm
+                                          to save the next row # */
+                       row++;
+                       last = value;
+               }
+       }
+
+       /* set the map type.  1 = normal, 0 = reversed */
+       pci_read_config_byte(pdev, E752X_DRM, &stat8);
+       pvt->map_type = ((stat8 & 0x0f) > ((stat8 >> 4) & 0x0f));
+}
+
+/* Return 0 on success or 1 on failure. */
+static int e752x_get_devs(struct pci_dev *pdev, int dev_idx,
+               struct e752x_pvt *pvt)
+{
+       struct pci_dev *dev;
+
+       pvt->bridge_ck = pci_get_device(PCI_VENDOR_ID_INTEL,
+                                       pvt->dev_info->err_dev,
+                                       pvt->bridge_ck);
+
+       if (pvt->bridge_ck == NULL)
+               pvt->bridge_ck = pci_scan_single_device(pdev->bus,
+                                                       PCI_DEVFN(0, 1));
+
+       if (pvt->bridge_ck == NULL) {
+               e752x_printk(KERN_ERR, "error reporting device not found:"
+                      "vendor %x device 0x%x (broken BIOS?)\n",
+                      PCI_VENDOR_ID_INTEL, e752x_devs[dev_idx].err_dev);
+               return 1;
+       }
+
+       dev = pci_get_device(PCI_VENDOR_ID_INTEL, e752x_devs[dev_idx].ctl_dev,
+                            NULL);
+
+       if (dev == NULL)
+               goto fail;
+
+       pvt->dev_d0f0 = dev;
+       pvt->dev_d0f1 = pci_dev_get(pvt->bridge_ck);
+
+       return 0;
+
+fail:
+       pci_dev_put(pvt->bridge_ck);
+       return 1;
+}
+
+static void e752x_init_error_reporting_regs(struct e752x_pvt *pvt)
+{
+       struct pci_dev *dev;
+
+       dev = pvt->dev_d0f1;
+       /* Turn off error disable & SMI in case the BIOS turned it on */
+       pci_write_config_byte(dev, E752X_HI_ERRMASK, 0x00);
+       pci_write_config_byte(dev, E752X_HI_SMICMD, 0x00);
+       pci_write_config_word(dev, E752X_SYSBUS_ERRMASK, 0x00);
+       pci_write_config_word(dev, E752X_SYSBUS_SMICMD, 0x00);
+       pci_write_config_byte(dev, E752X_BUF_ERRMASK, 0x00);
+       pci_write_config_byte(dev, E752X_BUF_SMICMD, 0x00);
+       pci_write_config_byte(dev, E752X_DRAM_ERRMASK, 0x00);
+       pci_write_config_byte(dev, E752X_DRAM_SMICMD, 0x00);
+}
+
+static int e752x_probe1(struct pci_dev *pdev, int dev_idx)
+{
        u16 pci_data;
        u8 stat8;
-       struct mem_ctl_info *mci = NULL;
-       struct e752x_pvt *pvt = NULL;
+       struct mem_ctl_info *mci;
+       struct e752x_pvt *pvt;
        u16 ddrcsr;
-       u32 drc;
        int drc_chan;   /* Number of channels 0=1chan,1=2chan */
-       int drc_drbg;   /* DRB granularity 0=64mb, 1=128mb */
-       int drc_ddim;   /* DRAM Data Integrity Mode 0=none,2=edac */
-       u32 dra;
-       unsigned long last_cumul_size;
-       struct pci_dev *dev = NULL;
        struct e752x_error_info discard;
 
        debugf0("%s(): mci\n", __func__);
@@ -794,25 +946,20 @@ static int e752x_probe1(struct pci_dev *pdev, int dev_idx)
        if (!force_function_unhide && !(stat8 & (1 << 5))) {
                printk(KERN_INFO "Contact your BIOS vendor to see if the "
                        "E752x error registers can be safely un-hidden\n");
-               goto fail;
+               return -ENOMEM;
        }
        stat8 |= (1 << 5);
        pci_write_config_byte(pdev, E752X_DEVPRES1, stat8);
 
-       /* need to find out the number of channels */
-       pci_read_config_dword(pdev, E752X_DRC, &drc);
        pci_read_config_word(pdev, E752X_DDRCSR, &ddrcsr);
        /* FIXME: should check >>12 or 0xf, true for all? */
        /* Dual channel = 1, Single channel = 0 */
-       drc_chan = (((ddrcsr >> 12) & 3) == 3);
-       drc_drbg = drc_chan + 1;        /* 128 in dual mode, 64 in single */
-       drc_ddim = (drc >> 20) & 0x3;
+       drc_chan = dual_channel_active(ddrcsr);
 
        mci = edac_mc_alloc(sizeof(*pvt), E752X_NR_CSROWS, drc_chan + 1);
 
        if (mci == NULL) {
-               rc = -ENOMEM;
-               goto fail;
+               return -ENOMEM;
        }
 
        debugf3("%s(): init mci\n", __func__);
@@ -827,113 +974,20 @@ static int e752x_probe1(struct pci_dev *pdev, int dev_idx)
        debugf3("%s(): init pvt\n", __func__);
        pvt = (struct e752x_pvt *) mci->pvt_info;
        pvt->dev_info = &e752x_devs[dev_idx];
-       pvt->bridge_ck = pci_get_device(PCI_VENDOR_ID_INTEL,
-                                       pvt->dev_info->err_dev,
-                                       pvt->bridge_ck);
-
-       if (pvt->bridge_ck == NULL)
-               pvt->bridge_ck = pci_scan_single_device(pdev->bus,
-                                       PCI_DEVFN(0, 1));
+       pvt->mc_symmetric = ((ddrcsr & 0x10) != 0);
 
-       if (pvt->bridge_ck == NULL) {
-               e752x_printk(KERN_ERR, "error reporting device not found:"
-                       "vendor %x device 0x%x (broken BIOS?)\n",
-                       PCI_VENDOR_ID_INTEL, e752x_devs[dev_idx].err_dev);
-               goto fail;
+       if (e752x_get_devs(pdev, dev_idx, pvt)) {
+               edac_mc_free(mci);
+               return -ENODEV;
        }
 
-       pvt->mc_symmetric = ((ddrcsr & 0x10) != 0);
        debugf3("%s(): more mci init\n", __func__);
        mci->ctl_name = pvt->dev_info->ctl_name;
        mci->edac_check = e752x_check;
        mci->ctl_page_to_phys = ctl_page_to_phys;
 
-       /* find out the device types */
-       pci_read_config_dword(pdev, E752X_DRA, &dra);
-
-       /*
-        * The dram row boundary (DRB) reg values are boundary address for
-        * each DRAM row with a granularity of 64 or 128MB (single/dual
-        * channel operation).  DRB regs are cumulative; therefore DRB7 will
-        * contain the total memory contained in all eight rows.
-        */
-       for (last_cumul_size = index = 0; index < mci->nr_csrows; index++) {
-               u8 value;
-               u32 cumul_size;
-
-               /* mem_dev 0=x8, 1=x4 */
-               int mem_dev = (dra >> (index * 4 + 2)) & 0x3;
-               struct csrow_info *csrow = &mci->csrows[index];
-
-               mem_dev = (mem_dev == 2);
-               pci_read_config_byte(pdev, E752X_DRB + index, &value);
-               /* convert a 128 or 64 MiB DRB to a page size. */
-               cumul_size = value << (25 + drc_drbg - PAGE_SHIFT);
-               debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index,
-                       cumul_size);
-
-               if (cumul_size == last_cumul_size)
-                       continue; /* not populated */
-
-               csrow->first_page = last_cumul_size;
-               csrow->last_page = cumul_size - 1;
-               csrow->nr_pages = cumul_size - last_cumul_size;
-               last_cumul_size = cumul_size;
-               csrow->grain = 1 << 12;  /* 4KiB - resolution of CELOG */
-               csrow->mtype = MEM_RDDR;  /* only one type supported */
-               csrow->dtype = mem_dev ? DEV_X4 : DEV_X8;
-
-               /*
-                * if single channel or x8 devices then SECDED
-                * if dual channel and x4 then S4ECD4ED
-                */
-               if (drc_ddim) {
-                       if (drc_chan && mem_dev) {
-                               csrow->edac_mode = EDAC_S4ECD4ED;
-                               mci->edac_cap |= EDAC_FLAG_S4ECD4ED;
-                       } else {
-                               csrow->edac_mode = EDAC_SECDED;
-                               mci->edac_cap |= EDAC_FLAG_SECDED;
-                       }
-               } else
-                       csrow->edac_mode = EDAC_NONE;
-       }
-
-       /* Fill in the memory map table */
-       {
-               u8 value;
-               u8 last = 0;
-               u8 row = 0;
-
-               for (index = 0; index < 8; index += 2) {
-                       pci_read_config_byte(pdev, E752X_DRB + index, &value);
-
-                       /* test if there is a dimm in this slot */
-                       if (value == last) {
-                               /* no dimm in the slot, so flag it as empty */
-                               pvt->map[index] = 0xff;
-                               pvt->map[index + 1] = 0xff;
-                       } else { /* there is a dimm in the slot */
-                               pvt->map[index] = row;
-                               row++;
-                               last = value;
-                               /* test the next value to see if the dimm is
-                                  double sided */
-                               pci_read_config_byte(pdev,
-                                               E752X_DRB + index + 1,
-                                               &value);
-                               pvt->map[index + 1] = (value == last) ?
-                                       0xff :  /* the dimm is single sided,
-                                                * so flag as empty
-                                                */
-                                       row;    /* this is a double sided dimm
-                                                * to save the next row #
-                                                */
-                               row++;
-                               last = value;
-                       }
-               }
-       }
+       e752x_init_csrows(mci, pdev, ddrcsr);
+       e752x_init_mem_map_table(pdev, pvt);
 
        /* set the map type.  1 = normal, 0 = reversed */
        pci_read_config_byte(pdev, E752X_DRM, &stat8);
@@ -961,21 +1015,7 @@ static int e752x_probe1(struct pci_dev *pdev, int dev_idx)
                goto fail;
        }
 
-       dev = pci_get_device(PCI_VENDOR_ID_INTEL, e752x_devs[dev_idx].ctl_dev,
-                       NULL);
-       pvt->dev_d0f0 = dev;
-       /* find the error reporting device and clear errors */
-       dev = pvt->dev_d0f1 = pci_dev_get(pvt->bridge_ck);
-       /* Turn off error disable & SMI in case the BIOS turned it on */
-       pci_write_config_byte(dev, E752X_HI_ERRMASK, 0x00);
-       pci_write_config_byte(dev, E752X_HI_SMICMD, 0x00);
-       pci_write_config_word(dev, E752X_SYSBUS_ERRMASK, 0x00);
-       pci_write_config_word(dev, E752X_SYSBUS_SMICMD, 0x00);
-       pci_write_config_byte(dev, E752X_BUF_ERRMASK, 0x00);
-       pci_write_config_byte(dev, E752X_BUF_SMICMD, 0x00);
-       pci_write_config_byte(dev, E752X_DRAM_ERRMASK, 0x00);
-       pci_write_config_byte(dev, E752X_DRAM_SMICMD, 0x00);
-
+       e752x_init_error_reporting_regs(pvt);
        e752x_get_error_info(mci, &discard); /* clear other MCH errors */
 
        /* get this far and it's successful */
@@ -983,20 +1023,12 @@ static int e752x_probe1(struct pci_dev *pdev, int dev_idx)
        return 0;
 
 fail:
-       if (mci) {
-               if (pvt->dev_d0f0)
-                       pci_dev_put(pvt->dev_d0f0);
-
-               if (pvt->dev_d0f1)
-                       pci_dev_put(pvt->dev_d0f1);
-
-               if (pvt->bridge_ck)
-                       pci_dev_put(pvt->bridge_ck);
-
-               edac_mc_free(mci);
-       }
+       pci_dev_put(pvt->dev_d0f0);
+       pci_dev_put(pvt->dev_d0f1);
+       pci_dev_put(pvt->bridge_ck);
+       edac_mc_free(mci);
 
-       return rc;
+       return -ENODEV;
 }
 
 /* returns count (>= 0), or negative on error */
index 1e282c843e777e5d2fdf92ffc1167d4667ed99b9..9878379b49930715cfafb713ae075e73bea9e275 100644 (file)
@@ -335,99 +335,61 @@ static void e7xxx_check(struct mem_ctl_info *mci)
        e7xxx_process_error_info(mci, &info, 1);
 }
 
-static int e7xxx_probe1(struct pci_dev *pdev, int dev_idx)
+/* Return 1 if dual channel mode is active.  Else return 0. */
+static inline int dual_channel_active(u32 drc, int dev_idx)
 {
-       int rc = -ENODEV;
-       int index;
-       u16 pci_data;
-       struct mem_ctl_info *mci = NULL;
-       struct e7xxx_pvt *pvt = NULL;
-       u32 drc;
-       int drc_chan = 1;       /* Number of channels 0=1chan,1=2chan */
-       int drc_drbg = 1;       /* DRB granularity 0=32mb,1=64mb */
-       int drc_ddim;           /* DRAM Data Integrity Mode 0=none,2=edac */
-       u32 dra;
-       unsigned long last_cumul_size;
-       struct e7xxx_error_info discard;
-
-       debugf0("%s(): mci\n", __func__);
+       return (dev_idx == E7501) ? ((drc >> 22) & 0x1) : 1;
+}
 
-       /* need to find out the number of channels */
-       pci_read_config_dword(pdev, E7XXX_DRC, &drc);
 
+/* Return DRB granularity (0=32mb, 1=64mb). */
+static inline int drb_granularity(u32 drc, int dev_idx)
+{
        /* only e7501 can be single channel */
-       if (dev_idx == E7501) {
-               drc_chan = ((drc >> 22) & 0x1);
-               drc_drbg = (drc >> 18) & 0x3;
-       }
-
-       drc_ddim = (drc >> 20) & 0x3;
-       mci = edac_mc_alloc(sizeof(*pvt), E7XXX_NR_CSROWS, drc_chan + 1);
-
-       if (mci == NULL) {
-               rc = -ENOMEM;
-               goto fail;
-       }
-
-       debugf3("%s(): init mci\n", __func__);
-       mci->mtype_cap = MEM_FLAG_RDDR;
-       mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED |
-                       EDAC_FLAG_S4ECD4ED;
-       /* FIXME - what if different memory types are in different csrows? */
-       mci->mod_name = EDAC_MOD_STR;
-       mci->mod_ver = E7XXX_REVISION;
-       mci->dev = &pdev->dev;
-
-       debugf3("%s(): init pvt\n", __func__);
-       pvt = (struct e7xxx_pvt *) mci->pvt_info;
-       pvt->dev_info = &e7xxx_devs[dev_idx];
-       pvt->bridge_ck = pci_get_device(PCI_VENDOR_ID_INTEL,
-                                       pvt->dev_info->err_dev,
-                                       pvt->bridge_ck);
+       return (dev_idx == E7501) ? ((drc >> 18) & 0x3) : 1;
+}
 
-       if (!pvt->bridge_ck) {
-               e7xxx_printk(KERN_ERR, "error reporting device not found:"
-                       "vendor %x device 0x%x (broken BIOS?)\n",
-                       PCI_VENDOR_ID_INTEL, e7xxx_devs[dev_idx].err_dev);
-               goto fail;
-       }
 
-       debugf3("%s(): more mci init\n", __func__);
-       mci->ctl_name = pvt->dev_info->ctl_name;
-       mci->edac_check = e7xxx_check;
-       mci->ctl_page_to_phys = ctl_page_to_phys;
+static void e7xxx_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev,
+               int dev_idx, u32 drc)
+{
+       unsigned long last_cumul_size;
+       int index;
+       u8 value;
+       u32 dra, cumul_size;
+       int drc_chan, drc_drbg, drc_ddim, mem_dev;
+       struct csrow_info *csrow;
 
-       /* find out the device types */
        pci_read_config_dword(pdev, E7XXX_DRA, &dra);
+       drc_chan = dual_channel_active(drc, dev_idx);
+       drc_drbg = drb_granularity(drc, dev_idx);
+       drc_ddim = (drc >> 20) & 0x3;
+       last_cumul_size = 0;
 
-       /*
-        * The dram row boundary (DRB) reg values are boundary address
+       /* The dram row boundary (DRB) reg values are boundary address
         * for each DRAM row with a granularity of 32 or 64MB (single/dual
         * channel operation).  DRB regs are cumulative; therefore DRB7 will
         * contain the total memory contained in all eight rows.
         */
-       for (last_cumul_size = index = 0; index < mci->nr_csrows; index++) {
-               u8 value;
-               u32 cumul_size;
+       for (index = 0; index < mci->nr_csrows; index++) {
                /* mem_dev 0=x8, 1=x4 */
-               int mem_dev = (dra >> (index * 4 + 3)) & 0x1;
-               struct csrow_info *csrow = &mci->csrows[index];
+               mem_dev = (dra >> (index * 4 + 3)) & 0x1;
+               csrow = &mci->csrows[index];
 
                pci_read_config_byte(pdev, E7XXX_DRB + index, &value);
                /* convert a 64 or 32 MiB DRB to a page size. */
                cumul_size = value << (25 + drc_drbg - PAGE_SHIFT);
                debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index,
                        cumul_size);
-
                if (cumul_size == last_cumul_size)
-                       continue;  /* not populated */
+                       continue;       /* not populated */
 
                csrow->first_page = last_cumul_size;
                csrow->last_page = cumul_size - 1;
                csrow->nr_pages = cumul_size - last_cumul_size;
                last_cumul_size = cumul_size;
-               csrow->grain = 1 << 12;  /* 4KiB - resolution of CELOG */
-               csrow->mtype = MEM_RDDR;  /* only one type supported */
+               csrow->grain = 1 << 12; /* 4KiB - resolution of CELOG */
+               csrow->mtype = MEM_RDDR;        /* only one type supported */
                csrow->dtype = mem_dev ? DEV_X4 : DEV_X8;
 
                /*
@@ -445,9 +407,54 @@ static int e7xxx_probe1(struct pci_dev *pdev, int dev_idx)
                } else
                        csrow->edac_mode = EDAC_NONE;
        }
+}
 
-       mci->edac_cap |= EDAC_FLAG_NONE;
+static int e7xxx_probe1(struct pci_dev *pdev, int dev_idx)
+{
+       u16 pci_data;
+       struct mem_ctl_info *mci = NULL;
+       struct e7xxx_pvt *pvt = NULL;
+       u32 drc;
+       int drc_chan;
+       struct e7xxx_error_info discard;
+
+       debugf0("%s(): mci\n", __func__);
+       pci_read_config_dword(pdev, E7XXX_DRC, &drc);
+
+       drc_chan = dual_channel_active(drc, dev_idx);
+       mci = edac_mc_alloc(sizeof(*pvt), E7XXX_NR_CSROWS, drc_chan + 1);
+
+       if (mci == NULL)
+               return -ENOMEM;
 
+       debugf3("%s(): init mci\n", __func__);
+       mci->mtype_cap = MEM_FLAG_RDDR;
+       mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED |
+                       EDAC_FLAG_S4ECD4ED;
+       /* FIXME - what if different memory types are in different csrows? */
+       mci->mod_name = EDAC_MOD_STR;
+       mci->mod_ver = E7XXX_REVISION;
+       mci->dev = &pdev->dev;
+       debugf3("%s(): init pvt\n", __func__);
+       pvt = (struct e7xxx_pvt *) mci->pvt_info;
+       pvt->dev_info = &e7xxx_devs[dev_idx];
+       pvt->bridge_ck = pci_get_device(PCI_VENDOR_ID_INTEL,
+                                       pvt->dev_info->err_dev,
+                                       pvt->bridge_ck);
+
+       if (!pvt->bridge_ck) {
+               e7xxx_printk(KERN_ERR, "error reporting device not found:"
+                       "vendor %x device 0x%x (broken BIOS?)\n",
+                       PCI_VENDOR_ID_INTEL, e7xxx_devs[dev_idx].err_dev);
+               goto fail0;
+       }
+
+       debugf3("%s(): more mci init\n", __func__);
+       mci->ctl_name = pvt->dev_info->ctl_name;
+       mci->edac_check = e7xxx_check;
+       mci->ctl_page_to_phys = ctl_page_to_phys;
+       e7xxx_init_csrows(mci, pdev, dev_idx, drc);
+       mci->edac_cap |= EDAC_FLAG_NONE;
        debugf3("%s(): tolm, remapbase, remaplimit\n", __func__);
        /* load the top of low memory, remap base, and remap limit vars */
        pci_read_config_word(pdev, E7XXX_TOLM, &pci_data);
@@ -468,21 +475,20 @@ static int e7xxx_probe1(struct pci_dev *pdev, int dev_idx)
         */
        if (edac_mc_add_mc(mci,0)) {
                debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
-               goto fail;
+               goto fail1;
        }
 
        /* get this far and it's successful */
        debugf3("%s(): success\n", __func__);
        return 0;
 
-fail:
-       if (mci != NULL) {
-               if(pvt != NULL && pvt->bridge_ck)
-                       pci_dev_put(pvt->bridge_ck);
-               edac_mc_free(mci);
-       }
+fail1:
+       pci_dev_put(pvt->bridge_ck);
+
+fail0:
+       edac_mc_free(mci);
 
-       return rc;
+       return -ENODEV;
 }
 
 /* returns count (>= 0), or negative on error */
index e2c3b8bc097b2cdb9a944bc98b0c359cd5a14b41..d196dcc850a8faab1e98693369faf02edd338630 100644 (file)
@@ -133,15 +133,50 @@ static void i82860_check(struct mem_ctl_info *mci)
        i82860_process_error_info(mci, &info, 1);
 }
 
-static int i82860_probe1(struct pci_dev *pdev, int dev_idx)
+static void i82860_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev)
 {
-       int rc = -ENODEV;
-       int index;
-       struct mem_ctl_info *mci = NULL;
        unsigned long last_cumul_size;
-       struct i82860_error_info discard;
+       u16 mchcfg_ddim;  /* DRAM Data Integrity Mode 0=none, 2=edac */
+       u16 value;
+       u32 cumul_size;
+       struct csrow_info *csrow;
+       int index;
+
+       pci_read_config_word(pdev, I82860_MCHCFG, &mchcfg_ddim);
+       mchcfg_ddim = mchcfg_ddim & 0x180;
+       last_cumul_size = 0;
+
+       /* The group row boundary (GRA) reg values are boundary address
+        * for each DRAM row with a granularity of 16MB.  GRA regs are
+        * cumulative; therefore GRA15 will contain the total memory contained
+        * in all eight rows.
+        */
+       for (index = 0; index < mci->nr_csrows; index++) {
+               csrow = &mci->csrows[index];
+               pci_read_config_word(pdev, I82860_GBA + index * 2, &value);
+               cumul_size = (value & I82860_GBA_MASK) <<
+                   (I82860_GBA_SHIFT - PAGE_SHIFT);
+               debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index,
+                       cumul_size);
+
+               if (cumul_size == last_cumul_size)
+                       continue;       /* not populated */
 
-       u16 mchcfg_ddim;        /* DRAM Data Integrity Mode 0=none,2=edac */
+               csrow->first_page = last_cumul_size;
+               csrow->last_page = cumul_size - 1;
+               csrow->nr_pages = cumul_size - last_cumul_size;
+               last_cumul_size = cumul_size;
+               csrow->grain = 1 << 12; /* I82860_EAP has 4KiB reolution */
+               csrow->mtype = MEM_RMBS;
+               csrow->dtype = DEV_UNKNOWN;
+               csrow->edac_mode = mchcfg_ddim ? EDAC_SECDED : EDAC_NONE;
+       }
+}
+
+static int i82860_probe1(struct pci_dev *pdev, int dev_idx)
+{
+       struct mem_ctl_info *mci;
+       struct i82860_error_info discard;
 
        /* RDRAM has channels but these don't map onto the abstractions that
           edac uses.
@@ -159,53 +194,15 @@ static int i82860_probe1(struct pci_dev *pdev, int dev_idx)
        debugf3("%s(): init mci\n", __func__);
        mci->dev = &pdev->dev;
        mci->mtype_cap = MEM_FLAG_DDR;
-
        mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
        /* I"m not sure about this but I think that all RDRAM is SECDED */
        mci->edac_cap = EDAC_FLAG_SECDED;
-       /* adjust FLAGS */
-
        mci->mod_name = EDAC_MOD_STR;
        mci->mod_ver = I82860_REVISION;
        mci->ctl_name = i82860_devs[dev_idx].ctl_name;
        mci->edac_check = i82860_check;
        mci->ctl_page_to_phys = NULL;
-
-       pci_read_config_word(pdev, I82860_MCHCFG, &mchcfg_ddim);
-       mchcfg_ddim = mchcfg_ddim & 0x180;
-
-       /*
-        * The group row boundary (GRA) reg values are boundary address
-        * for each DRAM row with a granularity of 16MB.  GRA regs are
-        * cumulative; therefore GRA15 will contain the total memory contained
-        * in all eight rows.
-        */
-       for (last_cumul_size = index = 0; index < mci->nr_csrows; index++) {
-               u16 value;
-               u32 cumul_size;
-               struct csrow_info *csrow = &mci->csrows[index];
-
-               pci_read_config_word(pdev, I82860_GBA + index * 2,
-                               &value);
-
-               cumul_size = (value & I82860_GBA_MASK) <<
-                   (I82860_GBA_SHIFT - PAGE_SHIFT);
-               debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index,
-                       cumul_size);
-
-               if (cumul_size == last_cumul_size)
-                       continue;       /* not populated */
-
-               csrow->first_page = last_cumul_size;
-               csrow->last_page = cumul_size - 1;
-               csrow->nr_pages = cumul_size - last_cumul_size;
-               last_cumul_size = cumul_size;
-               csrow->grain = 1 << 12;  /* I82860_EAP has 4KiB reolution */
-               csrow->mtype = MEM_RMBS;
-               csrow->dtype = DEV_UNKNOWN;
-               csrow->edac_mode = mchcfg_ddim ? EDAC_SECDED : EDAC_NONE;
-       }
-
+       i82860_init_csrows(mci, pdev);
        i82860_get_error_info(mci, &discard);  /* clear counters */
 
        /* Here we assume that we will never see multiple instances of this
@@ -213,14 +210,17 @@ static int i82860_probe1(struct pci_dev *pdev, int dev_idx)
         */
        if (edac_mc_add_mc(mci,0)) {
                debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
-               edac_mc_free(mci);
-       } else {
-               /* get this far and it's successful */
-               debugf3("%s(): success\n", __func__);
-               rc = 0;
+               goto fail;
        }
 
-       return rc;
+       /* get this far and it's successful */
+       debugf3("%s(): success\n", __func__);
+
+       return 0;
+
+fail:
+       edac_mc_free(mci);
+       return -ENODEV;
 }
 
 /* returns count (>= 0), or negative on error */
index 2be18ca96408752d3adaed932a0d6054c5bbcd85..6787403463a15058c6e2189f5071f334bc4109b4 100644 (file)
@@ -265,116 +265,109 @@ static void i82875p_check(struct mem_ctl_info *mci)
 extern int pci_proc_attach_device(struct pci_dev *);
 #endif
 
-static int i82875p_probe1(struct pci_dev *pdev, int dev_idx)
+/* Return 0 on success or 1 on failure. */
+static int i82875p_setup_overfl_dev(struct pci_dev *pdev,
+               struct pci_dev **ovrfl_pdev, void __iomem **ovrfl_window)
 {
-       int rc = -ENODEV;
-       int index;
-       struct mem_ctl_info *mci = NULL;
-       struct i82875p_pvt *pvt = NULL;
-       unsigned long last_cumul_size;
-       struct pci_dev *ovrfl_pdev;
-       void __iomem *ovrfl_window = NULL;
-       u32 drc;
-       u32 drc_chan;           /* Number of channels 0=1chan,1=2chan */
-       u32 nr_chans;
-       u32 drc_ddim;           /* DRAM Data Integrity Mode 0=none,2=edac */
-       struct i82875p_error_info discard;
+       struct pci_dev *dev;
+       void __iomem *window;
 
-       debugf0("%s()\n", __func__);
-       ovrfl_pdev = pci_get_device(PCI_VEND_DEV(INTEL, 82875_6), NULL);
+       *ovrfl_pdev = NULL;
+       *ovrfl_window = NULL;
+       dev = pci_get_device(PCI_VEND_DEV(INTEL, 82875_6), NULL);
 
-       if (!ovrfl_pdev) {
-               /*
-                * Intel tells BIOS developers to hide device 6 which
+       if (dev == NULL) {
+               /* Intel tells BIOS developers to hide device 6 which
                 * configures the overflow device access containing
                 * the DRBs - this is where we expose device 6.
                 * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm
                 */
                pci_write_bits8(pdev, 0xf4, 0x2, 0x2);
-               ovrfl_pdev =
-                       pci_scan_single_device(pdev->bus, PCI_DEVFN(6, 0));
+               dev = pci_scan_single_device(pdev->bus, PCI_DEVFN(6, 0));
 
-               if (!ovrfl_pdev)
-                       return -ENODEV;
+               if (dev == NULL)
+                       return 1;
        }
 
+       *ovrfl_pdev = dev;
+
 #ifdef CONFIG_PROC_FS
-       if (!ovrfl_pdev->procent && pci_proc_attach_device(ovrfl_pdev)) {
-               i82875p_printk(KERN_ERR,
-                       "%s(): Failed to attach overflow device\n", __func__);
-               return -ENODEV;
+       if ((dev->procent == NULL) && pci_proc_attach_device(dev)) {
+               i82875p_printk(KERN_ERR, "%s(): Failed to attach overflow "
+                              "device\n", __func__);
+               return 1;
        }
-#endif
-                               /* CONFIG_PROC_FS */
-       if (pci_enable_device(ovrfl_pdev)) {
-               i82875p_printk(KERN_ERR,
-                       "%s(): Failed to enable overflow device\n", __func__);
-               return -ENODEV;
+#endif  /* CONFIG_PROC_FS */
+       if (pci_enable_device(dev)) {
+               i82875p_printk(KERN_ERR, "%s(): Failed to enable overflow "
+                              "device\n", __func__);
+               return 1;
        }
 
-       if (pci_request_regions(ovrfl_pdev, pci_name(ovrfl_pdev))) {
+       if (pci_request_regions(dev, pci_name(dev))) {
 #ifdef CORRECT_BIOS
                goto fail0;
 #endif
        }
 
        /* cache is irrelevant for PCI bus reads/writes */
-       ovrfl_window = ioremap_nocache(pci_resource_start(ovrfl_pdev, 0),
-                               pci_resource_len(ovrfl_pdev, 0));
+       window = ioremap_nocache(pci_resource_start(dev, 0),
+                                pci_resource_len(dev, 0));
 
-       if (!ovrfl_window) {
+       if (window == NULL) {
                i82875p_printk(KERN_ERR, "%s(): Failed to ioremap bar6\n",
-                       __func__);
+                              __func__);
                goto fail1;
        }
 
-       /* need to find out the number of channels */
-       drc = readl(ovrfl_window + I82875P_DRC);
-       drc_chan = ((drc >> 21) & 0x1);
-       nr_chans = drc_chan + 1;
+       *ovrfl_window = window;
+       return 0;
 
-       drc_ddim = (drc >> 18) & 0x1;
-       mci = edac_mc_alloc(sizeof(*pvt), I82875P_NR_CSROWS(nr_chans),
-                               nr_chans);
+fail1:
+       pci_release_regions(dev);
 
-       if (!mci) {
-               rc = -ENOMEM;
-               goto fail2;
-       }
+#ifdef CORRECT_BIOS
+fail0:
+       pci_disable_device(dev);
+#endif
+       /* NOTE: the ovrfl proc entry and pci_dev are intentionally left */
+       return 1;
+}
 
-       debugf3("%s(): init mci\n", __func__);
-       mci->dev = &pdev->dev;
-       mci->mtype_cap = MEM_FLAG_DDR;
-       mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
-       mci->edac_cap = EDAC_FLAG_UNKNOWN;
-       /* adjust FLAGS */
 
-       mci->mod_name = EDAC_MOD_STR;
-       mci->mod_ver = I82875P_REVISION;
-       mci->ctl_name = i82875p_devs[dev_idx].ctl_name;
-       mci->edac_check = i82875p_check;
-       mci->ctl_page_to_phys = NULL;
-       debugf3("%s(): init pvt\n", __func__);
-       pvt = (struct i82875p_pvt *) mci->pvt_info;
-       pvt->ovrfl_pdev = ovrfl_pdev;
-       pvt->ovrfl_window = ovrfl_window;
+/* Return 1 if dual channel mode is active.  Else return 0. */
+static inline int dual_channel_active(u32 drc)
+{
+       return (drc >> 21) & 0x1;
+}
 
-       /*
-        * The dram row boundary (DRB) reg values are boundary address
+
+static void i82875p_init_csrows(struct mem_ctl_info *mci,
+               struct pci_dev *pdev, void __iomem *ovrfl_window, u32 drc)
+{
+       struct csrow_info *csrow;
+       unsigned long last_cumul_size;
+       u8 value;
+       u32 drc_ddim;  /* DRAM Data Integrity Mode 0=none,2=edac */
+       u32 cumul_size;
+       int index;
+
+       drc_ddim = (drc >> 18) & 0x1;
+       last_cumul_size = 0;
+
+       /* The dram row boundary (DRB) reg values are boundary address
         * for each DRAM row with a granularity of 32 or 64MB (single/dual
         * channel operation).  DRB regs are cumulative; therefore DRB7 will
         * contain the total memory contained in all eight rows.
         */
-       for (last_cumul_size = index = 0; index < mci->nr_csrows; index++) {
-               u8 value;
-               u32 cumul_size;
-               struct csrow_info *csrow = &mci->csrows[index];
+
+       for (index = 0; index < mci->nr_csrows; index++) {
+               csrow = &mci->csrows[index];
 
                value = readb(ovrfl_window + I82875P_DRB + index);
                cumul_size = value << (I82875P_DRB_SHIFT - PAGE_SHIFT);
                debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index,
                        cumul_size);
-
                if (cumul_size == last_cumul_size)
                        continue;       /* not populated */
 
@@ -382,12 +375,54 @@ static int i82875p_probe1(struct pci_dev *pdev, int dev_idx)
                csrow->last_page = cumul_size - 1;
                csrow->nr_pages = cumul_size - last_cumul_size;
                last_cumul_size = cumul_size;
-               csrow->grain = 1 << 12;  /* I82875P_EAP has 4KiB reolution */
+               csrow->grain = 1 << 12; /* I82875P_EAP has 4KiB reolution */
                csrow->mtype = MEM_DDR;
                csrow->dtype = DEV_UNKNOWN;
                csrow->edac_mode = drc_ddim ? EDAC_SECDED : EDAC_NONE;
        }
+}
+
+static int i82875p_probe1(struct pci_dev *pdev, int dev_idx)
+{
+       int rc = -ENODEV;
+       struct mem_ctl_info *mci;
+       struct i82875p_pvt *pvt;
+       struct pci_dev *ovrfl_pdev;
+       void __iomem *ovrfl_window;
+       u32 drc;
+       u32 nr_chans;
+       struct i82875p_error_info discard;
+
+       debugf0("%s()\n", __func__);
+       ovrfl_pdev = pci_get_device(PCI_VEND_DEV(INTEL, 82875_6), NULL);
+
+       if (i82875p_setup_overfl_dev(pdev, &ovrfl_pdev, &ovrfl_window))
+               return -ENODEV;
+       drc = readl(ovrfl_window + I82875P_DRC);
+       nr_chans = dual_channel_active(drc) + 1;
+       mci = edac_mc_alloc(sizeof(*pvt), I82875P_NR_CSROWS(nr_chans),
+                               nr_chans);
+
+       if (!mci) {
+               rc = -ENOMEM;
+               goto fail0;
+       }
 
+       debugf3("%s(): init mci\n", __func__);
+       mci->dev = &pdev->dev;
+       mci->mtype_cap = MEM_FLAG_DDR;
+       mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
+       mci->edac_cap = EDAC_FLAG_UNKNOWN;
+       mci->mod_name = EDAC_MOD_STR;
+       mci->mod_ver = I82875P_REVISION;
+       mci->ctl_name = i82875p_devs[dev_idx].ctl_name;
+       mci->edac_check = i82875p_check;
+       mci->ctl_page_to_phys = NULL;
+       debugf3("%s(): init pvt\n", __func__);
+       pvt = (struct i82875p_pvt *) mci->pvt_info;
+       pvt->ovrfl_pdev = ovrfl_pdev;
+       pvt->ovrfl_window = ovrfl_window;
+       i82875p_init_csrows(mci, pdev, ovrfl_window, drc);
        i82875p_get_error_info(mci, &discard);  /* clear counters */
 
        /* Here we assume that we will never see multiple instances of this
@@ -395,25 +430,20 @@ static int i82875p_probe1(struct pci_dev *pdev, int dev_idx)
         */
        if (edac_mc_add_mc(mci,0)) {
                debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
-               goto fail3;
+               goto fail1;
        }
 
        /* get this far and it's successful */
        debugf3("%s(): success\n", __func__);
        return 0;
 
-fail3:
+fail1:
        edac_mc_free(mci);
 
-fail2:
+fail0:
        iounmap(ovrfl_window);
-
-fail1:
        pci_release_regions(ovrfl_pdev);
 
-#ifdef CORRECT_BIOS
-fail0:
-#endif
        pci_disable_device(ovrfl_pdev);
        /* NOTE: the ovrfl proc entry and pci_dev are intentionally left */
        return rc;
index eb3aa615dc57ce6b526a39b408e347770b6709c4..fecdb2c9ee28d4ff64a1d8e6683f114a3a5be271 100644 (file)
@@ -205,25 +205,72 @@ static void r82600_check(struct mem_ctl_info *mci)
        r82600_process_error_info(mci, &info, 1);
 }
 
-static int r82600_probe1(struct pci_dev *pdev, int dev_idx)
+static inline int ecc_enabled(u8 dramcr)
 {
-       int rc = -ENODEV;
+       return dramcr & BIT(5);
+}
+
+static void r82600_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev,
+               u8 dramcr)
+{
+       struct csrow_info *csrow;
        int index;
-       struct mem_ctl_info *mci = NULL;
+       u8 drbar;  /* SDRAM Row Boundry Address Register */
+       u32 row_high_limit, row_high_limit_last;
+       u32 reg_sdram, ecc_on, row_base;
+
+       ecc_on = ecc_enabled(dramcr);
+       reg_sdram = dramcr & BIT(4);
+       row_high_limit_last = 0;
+
+       for (index = 0; index < mci->nr_csrows; index++) {
+               csrow = &mci->csrows[index];
+
+               /* find the DRAM Chip Select Base address and mask */
+               pci_read_config_byte(pdev, R82600_DRBA + index, &drbar);
+
+               debugf1("%s() Row=%d DRBA = %#0x\n", __func__, index, drbar);
+
+               row_high_limit = ((u32) drbar << 24);
+/*             row_high_limit = ((u32)drbar << 24) | 0xffffffUL; */
+
+               debugf1("%s() Row=%d, Boundry Address=%#0x, Last = %#0x\n",
+                       __func__, index, row_high_limit, row_high_limit_last);
+
+               /* Empty row [p.57] */
+               if (row_high_limit == row_high_limit_last)
+                       continue;
+
+               row_base = row_high_limit_last;
+
+               csrow->first_page = row_base >> PAGE_SHIFT;
+               csrow->last_page = (row_high_limit >> PAGE_SHIFT) - 1;
+               csrow->nr_pages = csrow->last_page - csrow->first_page + 1;
+               /* Error address is top 19 bits - so granularity is      *
+                * 14 bits                                               */
+               csrow->grain = 1 << 14;
+               csrow->mtype = reg_sdram ? MEM_RDDR : MEM_DDR;
+               /* FIXME - check that this is unknowable with this chipset */
+               csrow->dtype = DEV_UNKNOWN;
+
+               /* Mode is global on 82600 */
+               csrow->edac_mode = ecc_on ? EDAC_SECDED : EDAC_NONE;
+               row_high_limit_last = row_high_limit;
+       }
+}
+
+static int r82600_probe1(struct pci_dev *pdev, int dev_idx)
+{
+       struct mem_ctl_info *mci;
        u8 dramcr;
-       u32 ecc_on;
-       u32 reg_sdram;
        u32 eapr;
        u32 scrub_disabled;
        u32 sdram_refresh_rate;
-       u32 row_high_limit_last = 0;
        struct r82600_error_info discard;
 
        debugf0("%s()\n", __func__);
        pci_read_config_byte(pdev, R82600_DRAMC, &dramcr);
        pci_read_config_dword(pdev, R82600_EAP, &eapr);
-       ecc_on = dramcr & BIT(5);
-       reg_sdram = dramcr & BIT(4);
        scrub_disabled = eapr & BIT(31);
        sdram_refresh_rate = dramcr & (BIT(0) | BIT(1));
        debugf2("%s(): sdram refresh rate = %#0x\n", __func__,
@@ -231,10 +278,8 @@ static int r82600_probe1(struct pci_dev *pdev, int dev_idx)
        debugf2("%s(): DRAMC register = %#0x\n", __func__, dramcr);
        mci = edac_mc_alloc(0, R82600_NR_CSROWS, R82600_NR_CHANS);
 
-       if (mci == NULL) {
-               rc = -ENOMEM;
-               goto fail;
-       }
+       if (mci == NULL)
+               return -ENOMEM;
 
        debugf0("%s(): mci = %p\n", __func__, mci);
        mci->dev = &pdev->dev;
@@ -250,7 +295,7 @@ static int r82600_probe1(struct pci_dev *pdev, int dev_idx)
         * is possible.                                               */
        mci->edac_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED;
 
-       if (ecc_on) {
+       if (ecc_enabled(dramcr)) {
                if (scrub_disabled)
                        debugf3("%s(): mci = %p - Scrubbing disabled! EAP: "
                                "%#0x\n", __func__, mci, eapr);
@@ -262,46 +307,7 @@ static int r82600_probe1(struct pci_dev *pdev, int dev_idx)
        mci->ctl_name = "R82600";
        mci->edac_check = r82600_check;
        mci->ctl_page_to_phys = NULL;
-
-       for (index = 0; index < mci->nr_csrows; index++) {
-               struct csrow_info *csrow = &mci->csrows[index];
-               u8 drbar;       /* sDram Row Boundry Address Register */
-               u32 row_high_limit;
-               u32 row_base;
-
-               /* find the DRAM Chip Select Base address and mask */
-               pci_read_config_byte(pdev, R82600_DRBA + index, &drbar);
-
-               debugf1("MC%d: %s() Row=%d DRBA = %#0x\n", mci->mc_idx,
-                       __func__, index, drbar);
-
-               row_high_limit = ((u32) drbar << 24);
-/*             row_high_limit = ((u32)drbar << 24) | 0xffffffUL; */
-
-               debugf1("MC%d: %s() Row=%d, Boundry Address=%#0x, Last = "
-                       "%#0x \n", mci->mc_idx, __func__, index,
-                       row_high_limit, row_high_limit_last);
-
-               /* Empty row [p.57] */
-               if (row_high_limit == row_high_limit_last)
-                       continue;
-
-               row_base = row_high_limit_last;
-               csrow->first_page = row_base >> PAGE_SHIFT;
-               csrow->last_page = (row_high_limit >> PAGE_SHIFT) - 1;
-               csrow->nr_pages = csrow->last_page - csrow->first_page + 1;
-               /* Error address is top 19 bits - so granularity is      *
-                * 14 bits                                               */
-               csrow->grain = 1 << 14;
-               csrow->mtype = reg_sdram ? MEM_RDDR : MEM_DDR;
-               /* FIXME - check that this is unknowable with this chipset */
-               csrow->dtype = DEV_UNKNOWN;
-
-               /* Mode is global on 82600 */
-               csrow->edac_mode = ecc_on ? EDAC_SECDED : EDAC_NONE;
-               row_high_limit_last = row_high_limit;
-       }
-
+       r82600_init_csrows(mci, pdev, dramcr);
        r82600_get_error_info(mci, &discard);  /* clear counters */
 
        /* Here we assume that we will never see multiple instances of this
@@ -324,10 +330,8 @@ static int r82600_probe1(struct pci_dev *pdev, int dev_idx)
        return 0;
 
 fail:
-       if (mci)
-               edac_mc_free(mci);
-
-       return rc;
+       edac_mc_free(mci);
+       return -ENODEV;
 }
 
 /* returns count (>= 0), or negative on error */