return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->pdev_set_param_cmdid);
}
-int ath10k_wmi_cmd_init(struct ath10k *ar)
+static int ath10k_wmi_main_cmd_init(struct ath10k *ar)
{
struct wmi_init_cmd *cmd;
struct sk_buff *buf;
return ath10k_wmi_cmd_send(ar, buf, ar->wmi.cmd->init_cmdid);
}
+static int ath10k_wmi_10x_cmd_init(struct ath10k *ar)
+{
+ struct wmi_init_cmd_10x *cmd;
+ struct sk_buff *buf;
+ struct wmi_resource_config_10x config = {};
+ u32 len, val;
+ int i;
+
+ config.num_vdevs = __cpu_to_le32(TARGET_NUM_VDEVS);
+ config.num_peers = __cpu_to_le32(TARGET_NUM_PEERS + TARGET_NUM_VDEVS);
+ config.num_peer_keys = __cpu_to_le32(TARGET_NUM_PEER_KEYS);
+ config.num_tids = __cpu_to_le32(TARGET_NUM_TIDS);
+ config.ast_skid_limit = __cpu_to_le32(TARGET_AST_SKID_LIMIT);
+ config.tx_chain_mask = __cpu_to_le32(TARGET_TX_CHAIN_MASK);
+ config.rx_chain_mask = __cpu_to_le32(TARGET_RX_CHAIN_MASK);
+ config.rx_timeout_pri_vo = __cpu_to_le32(TARGET_RX_TIMEOUT_LO_PRI);
+ config.rx_timeout_pri_vi = __cpu_to_le32(TARGET_RX_TIMEOUT_LO_PRI);
+ config.rx_timeout_pri_be = __cpu_to_le32(TARGET_RX_TIMEOUT_LO_PRI);
+ config.rx_timeout_pri_bk = __cpu_to_le32(TARGET_RX_TIMEOUT_HI_PRI);
+ config.rx_decap_mode = __cpu_to_le32(TARGET_RX_DECAP_MODE);
+
+ config.scan_max_pending_reqs =
+ __cpu_to_le32(TARGET_SCAN_MAX_PENDING_REQS);
+
+ config.bmiss_offload_max_vdev =
+ __cpu_to_le32(TARGET_BMISS_OFFLOAD_MAX_VDEV);
+
+ config.roam_offload_max_vdev =
+ __cpu_to_le32(TARGET_ROAM_OFFLOAD_MAX_VDEV);
+
+ config.roam_offload_max_ap_profiles =
+ __cpu_to_le32(TARGET_ROAM_OFFLOAD_MAX_AP_PROFILES);
+
+ config.num_mcast_groups = __cpu_to_le32(TARGET_NUM_MCAST_GROUPS);
+ config.num_mcast_table_elems =
+ __cpu_to_le32(TARGET_NUM_MCAST_TABLE_ELEMS);
+
+ config.mcast2ucast_mode = __cpu_to_le32(TARGET_MCAST2UCAST_MODE);
+ config.tx_dbg_log_size = __cpu_to_le32(TARGET_TX_DBG_LOG_SIZE);
+ config.num_wds_entries = __cpu_to_le32(TARGET_NUM_WDS_ENTRIES);
+ config.dma_burst_size = __cpu_to_le32(TARGET_DMA_BURST_SIZE);
+ config.mac_aggr_delim = __cpu_to_le32(TARGET_MAC_AGGR_DELIM);
+
+ val = TARGET_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK;
+ config.rx_skip_defrag_timeout_dup_detection_check = __cpu_to_le32(val);
+
+ config.vow_config = __cpu_to_le32(TARGET_VOW_CONFIG);
+
+ config.num_msdu_desc = __cpu_to_le32(TARGET_NUM_MSDU_DESC);
+ config.max_frag_entries = __cpu_to_le32(TARGET_MAX_FRAG_ENTRIES);
+
+ len = sizeof(*cmd) +
+ (sizeof(struct host_memory_chunk) * ar->wmi.num_mem_chunks);
+
+ buf = ath10k_wmi_alloc_skb(len);
+ if (!buf)
+ return -ENOMEM;
+
+ cmd = (struct wmi_init_cmd_10x *)buf->data;
+
+ if (ar->wmi.num_mem_chunks == 0) {
+ cmd->num_host_mem_chunks = 0;
+ goto out;
+ }
+
+ ath10k_dbg(ATH10K_DBG_WMI, "wmi sending %d memory chunks info.\n",
+ __cpu_to_le32(ar->wmi.num_mem_chunks));
+
+ cmd->num_host_mem_chunks = __cpu_to_le32(ar->wmi.num_mem_chunks);
+
+ for (i = 0; i < ar->wmi.num_mem_chunks; i++) {
+ cmd->host_mem_chunks[i].ptr =
+ __cpu_to_le32(ar->wmi.mem_chunks[i].paddr);
+ cmd->host_mem_chunks[i].size =
+ __cpu_to_le32(ar->wmi.mem_chunks[i].len);
+ cmd->host_mem_chunks[i].req_id =
+ __cpu_to_le32(ar->wmi.mem_chunks[i].req_id);
+
+ ath10k_dbg(ATH10K_DBG_WMI,
+ "wmi chunk %d len %d requested, addr 0x%x\n",
+ i,
+ cmd->host_mem_chunks[i].size,
+ cmd->host_mem_chunks[i].ptr);
+ }
+out:
+ memcpy(&cmd->resource_config, &config, sizeof(config));
+
+ ath10k_dbg(ATH10K_DBG_WMI, "wmi init 10x\n");
+ return ath10k_wmi_cmd_send(ar, buf, ar->wmi.cmd->init_cmdid);
+}
+
+int ath10k_wmi_cmd_init(struct ath10k *ar)
+{
+ int ret;
+
+ if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features))
+ ret = ath10k_wmi_10x_cmd_init(ar);
+ else
+ ret = ath10k_wmi_main_cmd_init(ar);
+
+ return ret;
+}
+
static int ath10k_wmi_start_scan_calc_len(const struct wmi_start_scan_arg *arg)
{
int len;
__le32 max_frag_entries;
} __packed;
+struct wmi_resource_config_10x {
+ /* number of virtual devices (VAPs) to support */
+ __le32 num_vdevs;
+
+ /* number of peer nodes to support */
+ __le32 num_peers;
+
+ /* number of keys per peer */
+ __le32 num_peer_keys;
+
+ /* total number of TX/RX data TIDs */
+ __le32 num_tids;
+
+ /*
+ * max skid for resolving hash collisions
+ *
+ * The address search table is sparse, so that if two MAC addresses
+ * result in the same hash value, the second of these conflicting
+ * entries can slide to the next index in the address search table,
+ * and use it, if it is unoccupied. This ast_skid_limit parameter
+ * specifies the upper bound on how many subsequent indices to search
+ * over to find an unoccupied space.
+ */
+ __le32 ast_skid_limit;
+
+ /*
+ * the nominal chain mask for transmit
+ *
+ * The chain mask may be modified dynamically, e.g. to operate AP
+ * tx with a reduced number of chains if no clients are associated.
+ * This configuration parameter specifies the nominal chain-mask that
+ * should be used when not operating with a reduced set of tx chains.
+ */
+ __le32 tx_chain_mask;
+
+ /*
+ * the nominal chain mask for receive
+ *
+ * The chain mask may be modified dynamically, e.g. for a client
+ * to use a reduced number of chains for receive if the traffic to
+ * the client is low enough that it doesn't require downlink MIMO
+ * or antenna diversity.
+ * This configuration parameter specifies the nominal chain-mask that
+ * should be used when not operating with a reduced set of rx chains.
+ */
+ __le32 rx_chain_mask;
+
+ /*
+ * what rx reorder timeout (ms) to use for the AC
+ *
+ * Each WMM access class (voice, video, best-effort, background) will
+ * have its own timeout value to dictate how long to wait for missing
+ * rx MPDUs to arrive before flushing subsequent MPDUs that have
+ * already been received.
+ * This parameter specifies the timeout in milliseconds for each
+ * class.
+ */
+ __le32 rx_timeout_pri_vi;
+ __le32 rx_timeout_pri_vo;
+ __le32 rx_timeout_pri_be;
+ __le32 rx_timeout_pri_bk;
+
+ /*
+ * what mode the rx should decap packets to
+ *
+ * MAC can decap to RAW (no decap), native wifi or Ethernet types
+ * THis setting also determines the default TX behavior, however TX
+ * behavior can be modified on a per VAP basis during VAP init
+ */
+ __le32 rx_decap_mode;
+
+ /* what is the maximum scan requests than can be queued */
+ __le32 scan_max_pending_reqs;
+
+ /* maximum VDEV that could use BMISS offload */
+ __le32 bmiss_offload_max_vdev;
+
+ /* maximum VDEV that could use offload roaming */
+ __le32 roam_offload_max_vdev;
+
+ /* maximum AP profiles that would push to offload roaming */
+ __le32 roam_offload_max_ap_profiles;
+
+ /*
+ * how many groups to use for mcast->ucast conversion
+ *
+ * The target's WAL maintains a table to hold information regarding
+ * which peers belong to a given multicast group, so that if
+ * multicast->unicast conversion is enabled, the target can convert
+ * multicast tx frames to a series of unicast tx frames, to each
+ * peer within the multicast group.
+ This num_mcast_groups configuration parameter tells the target how
+ * many multicast groups to provide storage for within its multicast
+ * group membership table.
+ */
+ __le32 num_mcast_groups;
+
+ /*
+ * size to alloc for the mcast membership table
+ *
+ * This num_mcast_table_elems configuration parameter tells the
+ * target how many peer elements it needs to provide storage for in
+ * its multicast group membership table.
+ * These multicast group membership table elements are shared by the
+ * multicast groups stored within the table.
+ */
+ __le32 num_mcast_table_elems;
+
+ /*
+ * whether/how to do multicast->unicast conversion
+ *
+ * This configuration parameter specifies whether the target should
+ * perform multicast --> unicast conversion on transmit, and if so,
+ * what to do if it finds no entries in its multicast group
+ * membership table for the multicast IP address in the tx frame.
+ * Configuration value:
+ * 0 -> Do not perform multicast to unicast conversion.
+ * 1 -> Convert multicast frames to unicast, if the IP multicast
+ * address from the tx frame is found in the multicast group
+ * membership table. If the IP multicast address is not found,
+ * drop the frame.
+ * 2 -> Convert multicast frames to unicast, if the IP multicast
+ * address from the tx frame is found in the multicast group
+ * membership table. If the IP multicast address is not found,
+ * transmit the frame as multicast.
+ */
+ __le32 mcast2ucast_mode;
+
+ /*
+ * how much memory to allocate for a tx PPDU dbg log
+ *
+ * This parameter controls how much memory the target will allocate
+ * to store a log of tx PPDU meta-information (how large the PPDU
+ * was, when it was sent, whether it was successful, etc.)
+ */
+ __le32 tx_dbg_log_size;
+
+ /* how many AST entries to be allocated for WDS */
+ __le32 num_wds_entries;
+
+ /*
+ * MAC DMA burst size, e.g., For target PCI limit can be
+ * 0 -default, 1 256B
+ */
+ __le32 dma_burst_size;
+
+ /*
+ * Fixed delimiters to be inserted after every MPDU to
+ * account for interface latency to avoid underrun.
+ */
+ __le32 mac_aggr_delim;
+
+ /*
+ * determine whether target is responsible for detecting duplicate
+ * non-aggregate MPDU and timing out stale fragments.
+ *
+ * A-MPDU reordering is always performed on the target.
+ *
+ * 0: target responsible for frag timeout and dup checking
+ * 1: host responsible for frag timeout and dup checking
+ */
+ __le32 rx_skip_defrag_timeout_dup_detection_check;
+
+ /*
+ * Configuration for VoW :
+ * No of Video Nodes to be supported
+ * and Max no of descriptors for each Video link (node).
+ */
+ __le32 vow_config;
+
+ /* Number of msdu descriptors target should use */
+ __le32 num_msdu_desc;
+
+ /*
+ * Max. number of Tx fragments per MSDU
+ * This parameter controls the max number of Tx fragments per MSDU.
+ * This is sent by the target as part of the WMI_SERVICE_READY event
+ * and is overriden by the OS shim as required.
+ */
+ __le32 max_frag_entries;
+} __packed;
+
+
#define NUM_UNITS_IS_NUM_VDEVS 0x1
#define NUM_UNITS_IS_NUM_PEERS 0x2
struct host_memory_chunk host_mem_chunks[1];
} __packed;
+/* _10x stucture is from 10.X FW API */
+struct wmi_init_cmd_10x {
+ struct wmi_resource_config_10x resource_config;
+ __le32 num_host_mem_chunks;
+
+ /*
+ * variable number of host memory chunks.
+ * This should be the last element in the structure
+ */
+ struct host_memory_chunk host_mem_chunks[1];
+} __packed;
+
/* TLV for channel list */
struct wmi_chan_list {
__le32 tag; /* WMI_CHAN_LIST_TAG */