iwlwifi: move RF config into NIC config
authorJohannes Berg <johannes.berg@intel.com>
Wed, 30 May 2012 10:36:23 +0000 (12:36 +0200)
committerJohannes Berg <johannes.berg@intel.com>
Wed, 6 Jun 2012 11:25:17 +0000 (13:25 +0200)
Since the RF config is done for all devices,
there's no need to keep a separate function
that is called for all devices, move it into
the general NIC config function.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
drivers/net/wireless/iwlwifi/dvm/devices.c
drivers/net/wireless/iwlwifi/dvm/main.c

index d12f0631b67afc3f5d74b7f197f46ca48d969bc8..0521a6be09d283332d57d2a0dc2c7f0a2960e720 100644 (file)
 #include "commands.h"
 
 
-#define EEPROM_RF_CONFIG_TYPE_MAX      0x3
-
-static void iwl_rf_config(struct iwl_priv *priv)
-{
-       u16 radio_cfg = priv->eeprom_data->radio_cfg;
-
-       /* write radio config values to register */
-       if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) <= EEPROM_RF_CONFIG_TYPE_MAX) {
-               u32 reg_val =
-                       EEPROM_RF_CFG_TYPE_MSK(radio_cfg) <<
-                               CSR_HW_IF_CONFIG_REG_POS_PHY_TYPE |
-                       EEPROM_RF_CFG_STEP_MSK(radio_cfg) <<
-                               CSR_HW_IF_CONFIG_REG_POS_PHY_STEP |
-                       EEPROM_RF_CFG_DASH_MSK(radio_cfg) <<
-                               CSR_HW_IF_CONFIG_REG_POS_PHY_DASH;
-
-               iwl_set_bits_mask(priv->trans, CSR_HW_IF_CONFIG_REG,
-                                 CSR_HW_IF_CONFIG_REG_MSK_PHY_TYPE |
-                                 CSR_HW_IF_CONFIG_REG_MSK_PHY_STEP |
-                                 CSR_HW_IF_CONFIG_REG_MSK_PHY_DASH, reg_val);
-
-               IWL_INFO(priv, "Radio type=0x%x-0x%x-0x%x\n",
-                        EEPROM_RF_CFG_TYPE_MSK(radio_cfg),
-                        EEPROM_RF_CFG_STEP_MSK(radio_cfg),
-                        EEPROM_RF_CFG_DASH_MSK(radio_cfg));
-       } else {
-               WARN_ON(1);
-       }
-
-       /* set CSR_HW_CONFIG_REG for uCode use */
-       iwl_set_bit(priv->trans, CSR_HW_IF_CONFIG_REG,
-                   CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
-                   CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
-}
-
 /*
  * 1000 series
  * ===========
@@ -96,8 +61,6 @@ static void iwl1000_set_ct_threshold(struct iwl_priv *priv)
 /* NIC configuration for 1000 series */
 static void iwl1000_nic_config(struct iwl_priv *priv)
 {
-       iwl_rf_config(priv);
-
        /* Setting digital SVR for 1000 card to 1.32V */
        /* locking is acquired in iwl_set_bits_mask_prph() function */
        iwl_set_bits_mask_prph(priv->trans, APMG_DIGITAL_SVR_REG,
@@ -233,8 +196,6 @@ static void iwl2000_set_ct_threshold(struct iwl_priv *priv)
 /* NIC configuration for 2000 series */
 static void iwl2000_nic_config(struct iwl_priv *priv)
 {
-       iwl_rf_config(priv);
-
        iwl_set_bit(priv->trans, CSR_GP_DRIVER_REG,
                    CSR_GP_DRIVER_REG_BIT_RADIO_IQ_INVER);
 }
@@ -291,8 +252,6 @@ struct iwl_lib_ops iwl2030_lib = {
 /* NIC configuration for 5000 series */
 static void iwl5000_nic_config(struct iwl_priv *priv)
 {
-       iwl_rf_config(priv);
-
        /* W/A : NIC is stuck in a reset state after Early PCIe power off
         * (PCIe power is lost before PERST# is asserted),
         * causing ME FW to lose ownership and not being able to obtain it back.
@@ -502,8 +461,6 @@ static void iwl6000_set_ct_threshold(struct iwl_priv *priv)
 /* NIC configuration for 6000 series */
 static void iwl6000_nic_config(struct iwl_priv *priv)
 {
-       iwl_rf_config(priv);
-
        switch (priv->cfg->device_family) {
        case IWL_DEVICE_FAMILY_6005:
        case IWL_DEVICE_FAMILY_6030:
index c91b66c77972bf62d372ea8bcc7e35758ddc4776..ec0b77b862a8e7b58a5eeb7c1057a2e12d055a26 100644 (file)
@@ -2027,9 +2027,12 @@ static void iwl_cmd_queue_full(struct iwl_op_mode *op_mode)
        }
 }
 
+#define EEPROM_RF_CONFIG_TYPE_MAX      0x3
+
 static void iwl_nic_config(struct iwl_op_mode *op_mode)
 {
        struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
+       u16 radio_cfg = priv->eeprom_data->radio_cfg;
 
        /* SKU Control */
        iwl_set_bits_mask(priv->trans, CSR_HW_IF_CONFIG_REG,
@@ -2040,6 +2043,34 @@ static void iwl_nic_config(struct iwl_op_mode *op_mode)
                          (CSR_HW_REV_DASH(priv->trans->hw_rev) <<
                                CSR_HW_IF_CONFIG_REG_POS_MAC_DASH));
 
+       /* write radio config values to register */
+       if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) <= EEPROM_RF_CONFIG_TYPE_MAX) {
+               u32 reg_val =
+                       EEPROM_RF_CFG_TYPE_MSK(radio_cfg) <<
+                               CSR_HW_IF_CONFIG_REG_POS_PHY_TYPE |
+                       EEPROM_RF_CFG_STEP_MSK(radio_cfg) <<
+                               CSR_HW_IF_CONFIG_REG_POS_PHY_STEP |
+                       EEPROM_RF_CFG_DASH_MSK(radio_cfg) <<
+                               CSR_HW_IF_CONFIG_REG_POS_PHY_DASH;
+
+               iwl_set_bits_mask(priv->trans, CSR_HW_IF_CONFIG_REG,
+                                 CSR_HW_IF_CONFIG_REG_MSK_PHY_TYPE |
+                                 CSR_HW_IF_CONFIG_REG_MSK_PHY_STEP |
+                                 CSR_HW_IF_CONFIG_REG_MSK_PHY_DASH, reg_val);
+
+               IWL_INFO(priv, "Radio type=0x%x-0x%x-0x%x\n",
+                        EEPROM_RF_CFG_TYPE_MSK(radio_cfg),
+                        EEPROM_RF_CFG_STEP_MSK(radio_cfg),
+                        EEPROM_RF_CFG_DASH_MSK(radio_cfg));
+       } else {
+               WARN_ON(1);
+       }
+
+       /* set CSR_HW_CONFIG_REG for uCode use */
+       iwl_set_bit(priv->trans, CSR_HW_IF_CONFIG_REG,
+                   CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
+                   CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
+
        priv->lib->nic_config(priv);
 }