e1000: unify WoL capability detection code
authorJesse Brandeburg <jesse.brandeburg@intel.com>
Thu, 31 Aug 2006 21:27:46 +0000 (14:27 -0700)
committerAuke Kok <juke-jan.h.kok@intel.com>
Thu, 31 Aug 2006 21:27:46 +0000 (14:27 -0700)
WoL is constantly giving problems and needed a rewrite. Consolidates
all WoL capabilities into a single function, and disables WoL for all
other ports on the device except for port A.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
drivers/net/e1000/e1000.h
drivers/net/e1000/e1000_ethtool.c
drivers/net/e1000/e1000_main.c

index 70ba3783ad80e8d55352a5ee7b68f3f0976cda39..98afa9c2057e7a163f961b32cc346dfff0dbbbe1 100644 (file)
@@ -246,7 +246,6 @@ struct e1000_adapter {
        uint32_t bd_number;
        uint32_t rx_buffer_len;
        uint32_t wol;
-       uint32_t ksp3_port_a;
        uint32_t smartspeed;
        uint32_t en_mng_pt;
        uint16_t link_speed;
@@ -341,7 +340,9 @@ struct e1000_adapter {
        boolean_t tso_force;
 #endif
        boolean_t smart_power_down;     /* phy smart power down */
+       boolean_t quad_port_a;
        unsigned long flags;
+       uint32_t eeprom_wol;
 };
 
 enum e1000_state_t {
index ab2f153d5735d690bd7bde5d1557d40dff7774ee..04030729882bf1bc8905bff77284220edeace056 100644 (file)
@@ -1675,14 +1675,12 @@ e1000_diag_test(struct net_device *netdev,
        msleep_interruptible(4 * 1000);
 }
 
-static void
-e1000_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+static int e1000_wol_exclusion(struct e1000_adapter *adapter, struct ethtool_wolinfo *wol)
 {
-       struct e1000_adapter *adapter = netdev_priv(netdev);
        struct e1000_hw *hw = &adapter->hw;
+       int retval = 1; /* fail by default */
 
-       switch (adapter->hw.device_id) {
-       case E1000_DEV_ID_82542:
+       switch (hw->device_id) {
        case E1000_DEV_ID_82543GC_FIBER:
        case E1000_DEV_ID_82543GC_COPPER:
        case E1000_DEV_ID_82544EI_FIBER:
@@ -1690,52 +1688,86 @@ e1000_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
        case E1000_DEV_ID_82545EM_FIBER:
        case E1000_DEV_ID_82545EM_COPPER:
        case E1000_DEV_ID_82546GB_QUAD_COPPER:
+       case E1000_DEV_ID_82546GB_PCIE:
+               /* these don't support WoL at all */
                wol->supported = 0;
-               wol->wolopts   = 0;
-               return;
-
-       case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
-               /* device id 10B5 port-A supports wol */
-               if (!adapter->ksp3_port_a) {
-                       wol->supported = 0;
-                       return;
-               }
-               /* KSP3 does not suppport UCAST wake-ups for any interface */
-               wol->supported = WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC;
-
-               if (adapter->wol & E1000_WUFC_EX)
-                       DPRINTK(DRV, ERR, "Interface does not support "
-                       "directed (unicast) frame wake-up packets\n");
-               wol->wolopts = 0;
-               goto do_defaults;
-
+               break;
        case E1000_DEV_ID_82546EB_FIBER:
        case E1000_DEV_ID_82546GB_FIBER:
        case E1000_DEV_ID_82571EB_FIBER:
-               /* Wake events only supported on port A for dual fiber */
+       case E1000_DEV_ID_82571EB_SERDES:
+       case E1000_DEV_ID_82571EB_COPPER:
+               /* Wake events not supported on port B */
                if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1) {
                        wol->supported = 0;
-                       wol->wolopts   = 0;
-                       return;
+                       break;
                }
-               /* Fall Through */
-
+               /* return success for non excluded adapter ports */
+               retval = 0;
+               break;
+       case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+               /* quad port adapters only support WoL on port A */
+               if (!adapter->quad_port_a) {
+                       wol->supported = 0;
+                       break;
+               }
+               /* return success for non excluded adapter ports */
+               retval = 0;
+               break;
        default:
-               wol->supported = WAKE_UCAST | WAKE_MCAST |
-                                WAKE_BCAST | WAKE_MAGIC;
-               wol->wolopts = 0;
+               /* dual port cards only support WoL on port A from now on
+                * unless it was enabled in the eeprom for port B
+                * so exclude FUNC_1 ports from having WoL enabled */
+               if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1 &&
+                   !adapter->eeprom_wol) {
+                       wol->supported = 0;
+                       break;
+               }
 
-do_defaults:
-               if (adapter->wol & E1000_WUFC_EX)
-                       wol->wolopts |= WAKE_UCAST;
-               if (adapter->wol & E1000_WUFC_MC)
-                       wol->wolopts |= WAKE_MCAST;
-               if (adapter->wol & E1000_WUFC_BC)
-                       wol->wolopts |= WAKE_BCAST;
-               if (adapter->wol & E1000_WUFC_MAG)
-                       wol->wolopts |= WAKE_MAGIC;
+               retval = 0;
+       }
+
+       return retval;
+}
+
+static void
+e1000_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+       struct e1000_adapter *adapter = netdev_priv(netdev);
+
+       wol->supported = WAKE_UCAST | WAKE_MCAST |
+                        WAKE_BCAST | WAKE_MAGIC;
+       wol->wolopts = 0;
+
+       /* this function will set ->supported = 0 and return 1 if wol is not
+        * supported by this hardware */
+       if (e1000_wol_exclusion(adapter, wol))
                return;
+
+       /* apply any specific unsupported masks here */
+       switch (adapter->hw.device_id) {
+       case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+               /* KSP3 does not suppport UCAST wake-ups */
+               wol->supported &= ~WAKE_UCAST;
+
+               if (adapter->wol & E1000_WUFC_EX)
+                       DPRINTK(DRV, ERR, "Interface does not support "
+                       "directed (unicast) frame wake-up packets\n");
+               break;
+       default:
+               break;
        }
+
+       if (adapter->wol & E1000_WUFC_EX)
+               wol->wolopts |= WAKE_UCAST;
+       if (adapter->wol & E1000_WUFC_MC)
+               wol->wolopts |= WAKE_MCAST;
+       if (adapter->wol & E1000_WUFC_BC)
+               wol->wolopts |= WAKE_BCAST;
+       if (adapter->wol & E1000_WUFC_MAG)
+               wol->wolopts |= WAKE_MAGIC;
+
+       return;
 }
 
 static int
@@ -1744,52 +1776,36 @@ e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
        struct e1000_adapter *adapter = netdev_priv(netdev);
        struct e1000_hw *hw = &adapter->hw;
 
-       switch (adapter->hw.device_id) {
-       case E1000_DEV_ID_82542:
-       case E1000_DEV_ID_82543GC_FIBER:
-       case E1000_DEV_ID_82543GC_COPPER:
-       case E1000_DEV_ID_82544EI_FIBER:
-       case E1000_DEV_ID_82546EB_QUAD_COPPER:
-       case E1000_DEV_ID_82546GB_QUAD_COPPER:
-       case E1000_DEV_ID_82545EM_FIBER:
-       case E1000_DEV_ID_82545EM_COPPER:
+       if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
+               return -EOPNOTSUPP;
+
+       if (e1000_wol_exclusion(adapter, wol))
                return wol->wolopts ? -EOPNOTSUPP : 0;
 
+       switch (hw->device_id) {
        case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
-               /* device id 10B5 port-A supports wol */
-               if (!adapter->ksp3_port_a)
-                       return wol->wolopts ? -EOPNOTSUPP : 0;
-
                if (wol->wolopts & WAKE_UCAST) {
                        DPRINTK(DRV, ERR, "Interface does not support "
                        "directed (unicast) frame wake-up packets\n");
                        return -EOPNOTSUPP;
                }
-
-       case E1000_DEV_ID_82546EB_FIBER:
-       case E1000_DEV_ID_82546GB_FIBER:
-       case E1000_DEV_ID_82571EB_FIBER:
-               /* Wake events only supported on port A for dual fiber */
-               if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)
-                       return wol->wolopts ? -EOPNOTSUPP : 0;
-               /* Fall Through */
-
+               break;
        default:
-               if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
-                       return -EOPNOTSUPP;
-
-               adapter->wol = 0;
-
-               if (wol->wolopts & WAKE_UCAST)
-                       adapter->wol |= E1000_WUFC_EX;
-               if (wol->wolopts & WAKE_MCAST)
-                       adapter->wol |= E1000_WUFC_MC;
-               if (wol->wolopts & WAKE_BCAST)
-                       adapter->wol |= E1000_WUFC_BC;
-               if (wol->wolopts & WAKE_MAGIC)
-                       adapter->wol |= E1000_WUFC_MAG;
+               break;
        }
 
+       /* these settings will always override what we currently have */
+       adapter->wol = 0;
+
+       if (wol->wolopts & WAKE_UCAST)
+               adapter->wol |= E1000_WUFC_EX;
+       if (wol->wolopts & WAKE_MCAST)
+               adapter->wol |= E1000_WUFC_MC;
+       if (wol->wolopts & WAKE_BCAST)
+               adapter->wol |= E1000_WUFC_BC;
+       if (wol->wolopts & WAKE_MAGIC)
+               adapter->wol |= E1000_WUFC_MAG;
+
        return 0;
 }
 
index c128f62fa45ef0940b68b9ddc06cc11cf18c86c3..9071b78c77f9e64bf1efcf90476581c16729dcf8 100644 (file)
@@ -681,9 +681,9 @@ e1000_probe(struct pci_dev *pdev,
        unsigned long flash_start, flash_len;
 
        static int cards_found = 0;
-       static int e1000_ksp3_port_a = 0; /* global ksp3 port a indication */
+       static int global_quad_port_a = 0; /* global ksp3 port a indication */
        int i, err, pci_using_dac;
-       uint16_t eeprom_data;
+       uint16_t eeprom_data = 0;
        uint16_t eeprom_apme_mask = E1000_EEPROM_APME;
        if ((err = pci_enable_device(pdev)))
                return err;
@@ -786,15 +786,6 @@ e1000_probe(struct pci_dev *pdev,
        if (e1000_check_phy_reset_block(&adapter->hw))
                DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n");
 
-       /* if ksp3, indicate if it's port a being setup */
-       if (pdev->device == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 &&
-                       e1000_ksp3_port_a == 0)
-               adapter->ksp3_port_a = 1;
-       e1000_ksp3_port_a++;
-       /* Reset for multiple KP3 adapters */
-       if (e1000_ksp3_port_a == 4)
-               e1000_ksp3_port_a = 0;
-
        if (adapter->hw.mac_type >= e1000_82543) {
                netdev->features = NETIF_F_SG |
                                   NETIF_F_HW_CSUM |
@@ -913,7 +904,37 @@ e1000_probe(struct pci_dev *pdev,
                break;
        }
        if (eeprom_data & eeprom_apme_mask)
-               adapter->wol |= E1000_WUFC_MAG;
+               adapter->eeprom_wol |= E1000_WUFC_MAG;
+
+       /* now that we have the eeprom settings, apply the special cases
+        * where the eeprom may be wrong or the board simply won't support
+        * wake on lan on a particular port */
+       switch (pdev->device) {
+       case E1000_DEV_ID_82546GB_PCIE:
+               adapter->eeprom_wol = 0;
+               break;
+       case E1000_DEV_ID_82546EB_FIBER:
+       case E1000_DEV_ID_82546GB_FIBER:
+       case E1000_DEV_ID_82571EB_FIBER:
+               /* Wake events only supported on port A for dual fiber
+                * regardless of eeprom setting */
+               if (E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1)
+                       adapter->eeprom_wol = 0;
+               break;
+       case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+               /* if quad port adapter, disable WoL on all but port A */
+               if (global_quad_port_a != 0)
+                       adapter->eeprom_wol = 0;
+               else
+                       adapter->quad_port_a = 1;
+               /* Reset for multiple quad port adapters */
+               if (++global_quad_port_a == 4)
+                       global_quad_port_a = 0;
+               break;
+       }
+
+       /* initialize the wol settings based on the eeprom settings */
+       adapter->wol = adapter->eeprom_wol;
 
        /* print bus type/speed/width info */
        {
@@ -4635,7 +4656,7 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state)
                e1000_set_multi(netdev);
 
                /* turn on all-multi mode if wake on multicast is enabled */
-               if (adapter->wol & E1000_WUFC_MC) {
+               if (wufc & E1000_WUFC_MC) {
                        rctl = E1000_READ_REG(&adapter->hw, RCTL);
                        rctl |= E1000_RCTL_MPE;
                        E1000_WRITE_REG(&adapter->hw, RCTL, rctl);