spi: s3c64xx: do not configure the device twice

At the start of the transfer, the spi_config function is called
twice, the first time when the 3c64xx_spi_prepare_message is
called and the second time with the s3c64xx_spi_transfer_one,
both called from the spi framework.

Remove the first call at the prepare message because in that
point we don't have the imformation about "bit per word" and
frequency.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 14269b07804c9565293597fbf8418e516f64333b..c65a9e6baefd79642444f5e1b830539aa0f0d17a 100644 (file)
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -676,16 +676,6 @@ static int s3c64xx_spi_prepare_message(struct spi_master *master,
        struct spi_device *spi = msg->spi;
        struct s3c64xx_spi_csinfo *cs = spi->controller_data;
 
-       /* If Master's(controller) state differs from that needed by Slave */
-       if (sdd->cur_speed != spi->max_speed_hz
-                       || sdd->cur_mode != spi->mode
-                       || sdd->cur_bpw != spi->bits_per_word) {
-               sdd->cur_bpw = spi->bits_per_word;
-               sdd->cur_speed = spi->max_speed_hz;
-               sdd->cur_mode = spi->mode;
-               s3c64xx_spi_config(sdd);
-       }
-
        /* Configure feedback delay */
        writel(cs->fb_delay & 0x3, sdd->regs + S3C64XX_SPI_FB_CLK);
 
@@ -712,6 +702,7 @@ static int s3c64xx_spi_transfer_one(struct spi_master *master,
        if (bpw != sdd->cur_bpw || speed != sdd->cur_speed) {
                sdd->cur_bpw = bpw;
                sdd->cur_speed = speed;
+               sdd->cur_mode = spi->mode;
                s3c64xx_spi_config(sdd);
        }