brcmfmac: Cleanup roaming configuration.
authorHante Meuleman <meuleman@broadcom.com>
Wed, 25 Nov 2015 10:32:42 +0000 (11:32 +0100)
committerKalle Valo <kvalo@codeaurora.org>
Mon, 30 Nov 2015 12:46:42 +0000 (14:46 +0200)
Put all roaming configuration related code in one place and
configure timeout based upon roaming setting.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c

index 53831f50676275c63dd86baa98419184a66d9052..ef0f88233d36af2e93e9b4ff7a608477e5dab507 100644 (file)
@@ -4756,7 +4756,6 @@ struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg,
        vif->wdev.iftype = type;
 
        vif->pm_block = pm_block;
-       vif->roam_off = -1;
 
        brcmf_init_prof(&vif->profile);
 
@@ -5306,35 +5305,33 @@ static void init_vif_event(struct brcmf_cfg80211_vif_event *event)
        mutex_init(&event->vif_event_lock);
 }
 
-static s32
-brcmf_dongle_roam(struct brcmf_if *ifp, u32 bcn_timeout)
+static s32 brcmf_dongle_roam(struct brcmf_if *ifp)
 {
-       s32 err = 0;
+       s32 err;
+       u32 bcn_timeout;
        __le32 roamtrigger[2];
        __le32 roam_delta[2];
 
-       /*
-        * Setup timeout if Beacons are lost and roam is
-        * off to report link down
-        */
-       if (brcmf_roamoff) {
-               err = brcmf_fil_iovar_int_set(ifp, "bcn_timeout", bcn_timeout);
-               if (err) {
-                       brcmf_err("bcn_timeout error (%d)\n", err);
-                       goto dongle_rom_out;
-               }
+       /* Configure beacon timeout value based upon roaming setting */
+       if (brcmf_roamoff)
+               bcn_timeout = BRCMF_DEFAULT_BCN_TIMEOUT_ROAM_OFF;
+       else
+               bcn_timeout = BRCMF_DEFAULT_BCN_TIMEOUT_ROAM_ON;
+       err = brcmf_fil_iovar_int_set(ifp, "bcn_timeout", bcn_timeout);
+       if (err) {
+               brcmf_err("bcn_timeout error (%d)\n", err);
+               goto roam_setup_done;
        }
 
-       /*
-        * Enable/Disable built-in roaming to allow supplicant
-        * to take care of roaming
+       /* Enable/Disable built-in roaming to allow supplicant to take care of
+        * roaming.
         */
        brcmf_dbg(INFO, "Internal Roaming = %s\n",
                  brcmf_roamoff ? "Off" : "On");
        err = brcmf_fil_iovar_int_set(ifp, "roam_off", !!(brcmf_roamoff));
        if (err) {
                brcmf_err("roam_off error (%d)\n", err);
-               goto dongle_rom_out;
+               goto roam_setup_done;
        }
 
        roamtrigger[0] = cpu_to_le32(WL_ROAM_TRIGGER_LEVEL);
@@ -5343,7 +5340,7 @@ brcmf_dongle_roam(struct brcmf_if *ifp, u32 bcn_timeout)
                                     (void *)roamtrigger, sizeof(roamtrigger));
        if (err) {
                brcmf_err("WLC_SET_ROAM_TRIGGER error (%d)\n", err);
-               goto dongle_rom_out;
+               goto roam_setup_done;
        }
 
        roam_delta[0] = cpu_to_le32(WL_ROAM_DELTA);
@@ -5352,10 +5349,10 @@ brcmf_dongle_roam(struct brcmf_if *ifp, u32 bcn_timeout)
                                     (void *)roam_delta, sizeof(roam_delta));
        if (err) {
                brcmf_err("WLC_SET_ROAM_DELTA error (%d)\n", err);
-               goto dongle_rom_out;
+               goto roam_setup_done;
        }
 
-dongle_rom_out:
+roam_setup_done:
        return err;
 }
 
@@ -6070,7 +6067,7 @@ static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg)
        brcmf_dbg(INFO, "power save set to %s\n",
                  (power_mode ? "enabled" : "disabled"));
 
-       err = brcmf_dongle_roam(ifp, WL_BEACON_TIMEOUT);
+       err = brcmf_dongle_roam(ifp);
        if (err)
                goto default_conf_out;
        err = brcmf_cfg80211_change_iface(wdev->wiphy, ndev, wdev->iftype,
index 3b3096b47de932821af283d16ecb4e8fef5d2831..d492163e4de979c11e1884b5f248956436f45286 100644 (file)
@@ -28,7 +28,6 @@
 #define WL_EXTRA_BUF_MAX               2048
 #define WL_ROAM_TRIGGER_LEVEL          -75
 #define WL_ROAM_DELTA                  20
-#define WL_BEACON_TIMEOUT              3
 
 #define WL_SCAN_CHANNEL_TIME           40
 #define WL_SCAN_UNASSOC_TIME           40
@@ -77,6 +76,9 @@
 
 #define BRCMF_MAX_DEFAULT_KEYS         4
 
+/* beacon loss timeout defaults */
+#define BRCMF_DEFAULT_BCN_TIMEOUT_ROAM_ON      2
+#define BRCMF_DEFAULT_BCN_TIMEOUT_ROAM_OFF     4
 
 /**
  * enum brcmf_scan_status - scan engine status
@@ -178,7 +180,6 @@ struct vif_saved_ie {
  * @ifp: lower layer interface pointer
  * @wdev: wireless device.
  * @profile: profile information.
- * @roam_off: roaming state.
  * @sme_state: SME state using enum brcmf_vif_status bits.
  * @pm_block: power-management blocked.
  * @list: linked list.
@@ -189,7 +190,6 @@ struct brcmf_cfg80211_vif {
        struct brcmf_if *ifp;
        struct wireless_dev wdev;
        struct brcmf_cfg80211_profile profile;
-       s32 roam_off;
        unsigned long sme_state;
        bool pm_block;
        struct vif_saved_ie saved_ie;
index fe54844c75e089cfba03ef8add1e5aae9648d9be..59beed266dd3180014928b282d46b444e177db1c 100644 (file)
@@ -29,7 +29,6 @@
 
 const u8 ALLFFMAC[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
 
-#define BRCMF_DEFAULT_BCN_TIMEOUT      3
 #define BRCMF_DEFAULT_SCAN_CHANNEL_TIME        40
 #define BRCMF_DEFAULT_SCAN_UNASSOC_TIME        40
 
@@ -107,26 +106,6 @@ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp)
                goto done;
        }
 
-       /*
-        * Setup timeout if Beacons are lost and roam is off to report
-        * link down
-        */
-       err = brcmf_fil_iovar_int_set(ifp, "bcn_timeout",
-                                     BRCMF_DEFAULT_BCN_TIMEOUT);
-       if (err) {
-               brcmf_err("bcn_timeout error (%d)\n", err);
-               goto done;
-       }
-
-       /* Enable/Disable build-in roaming to allowed ext supplicant to take
-        * of romaing
-        */
-       err = brcmf_fil_iovar_int_set(ifp, "roam_off", 1);
-       if (err) {
-               brcmf_err("roam_off error (%d)\n", err);
-               goto done;
-       }
-
        /* Setup join_pref to select target by RSSI(with boost on 5GHz) */
        join_pref_params[0].type = BRCMF_JOIN_PREF_RSSI_DELTA;
        join_pref_params[0].len = 2;