rtc: add xilinx zynqmp rtc driver
authorSuneel Garapati <suneel.garapati@xilinx.com>
Wed, 19 Aug 2015 09:53:22 +0000 (15:23 +0530)
committerAlexandre Belloni <alexandre.belloni@free-electrons.com>
Sat, 5 Sep 2015 17:37:19 +0000 (19:37 +0200)
Add support for RTC controller found on Xilinx Zynq Ultrascale+ MPSoC
platform.

Signed-off-by: Suneel Garapati <suneel.garapati@xilinx.com>
Acked-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
drivers/rtc/Kconfig
drivers/rtc/Makefile
drivers/rtc/rtc-zynqmp.c [new file with mode: 0644]

index 0f65a222a48a40b3cc6d0cdb814ac425f7f08e0d..9d4290617cee5ab2969999ddb098db46b30f8e9d 100644 (file)
@@ -1116,6 +1116,13 @@ config RTC_DRV_OPAL
          This driver can also be built as a module. If so, the module
          will be called rtc-opal.
 
+config RTC_DRV_ZYNQMP
+       tristate "Xilinx Zynq Ultrascale+ MPSoC RTC"
+       depends on OF
+       help
+         If you say yes here you get support for the RTC controller found on
+         Xilinx Zynq Ultrascale+ MPSoC.
+
 comment "on-CPU RTC drivers"
 
 config RTC_DRV_DAVINCI
index 279738449a8d183016da1ae6a47d24208be1a2ee..e491eb524434220a09b766ba39cd369521b26244 100644 (file)
@@ -159,3 +159,4 @@ obj-$(CONFIG_RTC_DRV_WM831X)        += rtc-wm831x.o
 obj-$(CONFIG_RTC_DRV_WM8350)   += rtc-wm8350.o
 obj-$(CONFIG_RTC_DRV_X1205)    += rtc-x1205.o
 obj-$(CONFIG_RTC_DRV_XGENE)    += rtc-xgene.o
+obj-$(CONFIG_RTC_DRV_ZYNQMP)   += rtc-zynqmp.o
diff --git a/drivers/rtc/rtc-zynqmp.c b/drivers/rtc/rtc-zynqmp.c
new file mode 100644 (file)
index 0000000..8b28762
--- /dev/null
@@ -0,0 +1,279 @@
+/*
+ * Xilinx Zynq Ultrascale+ MPSoC Real Time Clock Driver
+ *
+ * Copyright (C) 2015 Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+
+/* RTC Registers */
+#define RTC_SET_TM_WR          0x00
+#define RTC_SET_TM_RD          0x04
+#define RTC_CALIB_WR           0x08
+#define RTC_CALIB_RD           0x0C
+#define RTC_CUR_TM             0x10
+#define RTC_CUR_TICK           0x14
+#define RTC_ALRM               0x18
+#define RTC_INT_STS            0x20
+#define RTC_INT_MASK           0x24
+#define RTC_INT_EN             0x28
+#define RTC_INT_DIS            0x2C
+#define RTC_CTRL               0x40
+
+#define RTC_FR_EN              BIT(20)
+#define RTC_FR_DATSHIFT                16
+#define RTC_TICK_MASK          0xFFFF
+#define RTC_INT_SEC            BIT(0)
+#define RTC_INT_ALRM           BIT(1)
+#define RTC_OSC_EN             BIT(24)
+
+#define RTC_CALIB_DEF          0x198233
+#define RTC_CALIB_MASK         0x1FFFFF
+#define RTC_SEC_MAX_VAL                0xFFFFFFFF
+
+struct xlnx_rtc_dev {
+       struct rtc_device       *rtc;
+       void __iomem            *reg_base;
+       int                     alarm_irq;
+       int                     sec_irq;
+};
+
+static int xlnx_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+       struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
+       unsigned long new_time;
+
+       new_time = rtc_tm_to_time64(tm);
+
+       if (new_time > RTC_SEC_MAX_VAL)
+               return -EINVAL;
+
+       writel(new_time, xrtcdev->reg_base + RTC_SET_TM_WR);
+
+       return 0;
+}
+
+static int xlnx_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+       struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
+
+       rtc_time64_to_tm(readl(xrtcdev->reg_base + RTC_CUR_TM), tm);
+
+       return rtc_valid_tm(tm);
+}
+
+static int xlnx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+       struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
+
+       rtc_time64_to_tm(readl(xrtcdev->reg_base + RTC_ALRM), &alrm->time);
+       alrm->enabled = readl(xrtcdev->reg_base + RTC_INT_MASK) & RTC_INT_ALRM;
+
+       return 0;
+}
+
+static int xlnx_rtc_alarm_irq_enable(struct device *dev, u32 enabled)
+{
+       struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
+
+       if (enabled)
+               writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_EN);
+       else
+               writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_DIS);
+
+       return 0;
+}
+
+static int xlnx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+       struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
+       unsigned long alarm_time;
+
+       alarm_time = rtc_tm_to_time64(&alrm->time);
+
+       if (alarm_time > RTC_SEC_MAX_VAL)
+               return -EINVAL;
+
+       writel((u32)alarm_time, (xrtcdev->reg_base + RTC_ALRM));
+
+       xlnx_rtc_alarm_irq_enable(dev, alrm->enabled);
+
+       return 0;
+}
+
+static void xlnx_init_rtc(struct xlnx_rtc_dev *xrtcdev, u32 calibval)
+{
+       /*
+        * Based on crystal freq of 33.330 KHz
+        * set the seconds counter and enable, set fractions counter
+        * to default value suggested as per design spec
+        * to correct RTC delay in frequency over period of time.
+        */
+       calibval &= RTC_CALIB_MASK;
+       writel(calibval, (xrtcdev->reg_base + RTC_CALIB_WR));
+}
+
+static const struct rtc_class_ops xlnx_rtc_ops = {
+       .set_time         = xlnx_rtc_set_time,
+       .read_time        = xlnx_rtc_read_time,
+       .read_alarm       = xlnx_rtc_read_alarm,
+       .set_alarm        = xlnx_rtc_set_alarm,
+       .alarm_irq_enable = xlnx_rtc_alarm_irq_enable,
+};
+
+static irqreturn_t xlnx_rtc_interrupt(int irq, void *id)
+{
+       struct xlnx_rtc_dev *xrtcdev = (struct xlnx_rtc_dev *)id;
+       unsigned int status;
+
+       status = readl(xrtcdev->reg_base + RTC_INT_STS);
+       /* Check if interrupt asserted */
+       if (!(status & (RTC_INT_SEC | RTC_INT_ALRM)))
+               return IRQ_NONE;
+
+       /* Clear interrupt */
+       writel(status, xrtcdev->reg_base + RTC_INT_STS);
+
+       if (status & RTC_INT_SEC)
+               rtc_update_irq(xrtcdev->rtc, 1, RTC_IRQF | RTC_UF);
+       if (status & RTC_INT_ALRM)
+               rtc_update_irq(xrtcdev->rtc, 1, RTC_IRQF | RTC_AF);
+
+       return IRQ_HANDLED;
+}
+
+static int xlnx_rtc_probe(struct platform_device *pdev)
+{
+       struct xlnx_rtc_dev *xrtcdev;
+       struct resource *res;
+       int ret;
+       unsigned int calibvalue;
+
+       xrtcdev = devm_kzalloc(&pdev->dev, sizeof(*xrtcdev), GFP_KERNEL);
+       if (!xrtcdev)
+               return -ENOMEM;
+
+       platform_set_drvdata(pdev, xrtcdev);
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+       xrtcdev->reg_base = devm_ioremap_resource(&pdev->dev, res);
+       if (IS_ERR(xrtcdev->reg_base))
+               return PTR_ERR(xrtcdev->reg_base);
+
+       xrtcdev->alarm_irq = platform_get_irq_byname(pdev, "alarm");
+       if (xrtcdev->alarm_irq < 0) {
+               dev_err(&pdev->dev, "no irq resource\n");
+               return xrtcdev->alarm_irq;
+       }
+       ret = devm_request_irq(&pdev->dev, xrtcdev->alarm_irq,
+                              xlnx_rtc_interrupt, 0,
+                              dev_name(&pdev->dev), xrtcdev);
+       if (ret) {
+               dev_err(&pdev->dev, "request irq failed\n");
+               return ret;
+       }
+
+       xrtcdev->sec_irq = platform_get_irq_byname(pdev, "sec");
+       if (xrtcdev->sec_irq < 0) {
+               dev_err(&pdev->dev, "no irq resource\n");
+               return xrtcdev->sec_irq;
+       }
+       ret = devm_request_irq(&pdev->dev, xrtcdev->sec_irq,
+                              xlnx_rtc_interrupt, 0,
+                              dev_name(&pdev->dev), xrtcdev);
+       if (ret) {
+               dev_err(&pdev->dev, "request irq failed\n");
+               return ret;
+       }
+
+       ret = of_property_read_u32(pdev->dev.of_node, "calibration",
+                                  &calibvalue);
+       if (ret)
+               calibvalue = RTC_CALIB_DEF;
+
+       xlnx_init_rtc(xrtcdev, calibvalue);
+
+       device_init_wakeup(&pdev->dev, 1);
+
+       xrtcdev->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+                                        &xlnx_rtc_ops, THIS_MODULE);
+       return PTR_ERR_OR_ZERO(xrtcdev->rtc);
+}
+
+static int xlnx_rtc_remove(struct platform_device *pdev)
+{
+       xlnx_rtc_alarm_irq_enable(&pdev->dev, 0);
+       device_init_wakeup(&pdev->dev, 0);
+
+       return 0;
+}
+
+static int __maybe_unused xlnx_rtc_suspend(struct device *dev)
+{
+       struct platform_device *pdev = to_platform_device(dev);
+       struct xlnx_rtc_dev *xrtcdev = platform_get_drvdata(pdev);
+
+       if (device_may_wakeup(&pdev->dev))
+               enable_irq_wake(xrtcdev->alarm_irq);
+       else
+               xlnx_rtc_alarm_irq_enable(dev, 0);
+
+       return 0;
+}
+
+static int __maybe_unused xlnx_rtc_resume(struct device *dev)
+{
+       struct platform_device *pdev = to_platform_device(dev);
+       struct xlnx_rtc_dev *xrtcdev = platform_get_drvdata(pdev);
+
+       if (device_may_wakeup(&pdev->dev))
+               disable_irq_wake(xrtcdev->alarm_irq);
+       else
+               xlnx_rtc_alarm_irq_enable(dev, 1);
+
+       return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(xlnx_rtc_pm_ops, xlnx_rtc_suspend, xlnx_rtc_resume);
+
+static const struct of_device_id xlnx_rtc_of_match[] = {
+       {.compatible = "xlnx,zynqmp-rtc" },
+       { }
+};
+MODULE_DEVICE_TABLE(of, xlnx_rtc_of_match);
+
+static struct platform_driver xlnx_rtc_driver = {
+       .probe          = xlnx_rtc_probe,
+       .remove         = xlnx_rtc_remove,
+       .driver         = {
+               .name   = KBUILD_MODNAME,
+               .pm     = &xlnx_rtc_pm_ops,
+               .of_match_table = xlnx_rtc_of_match,
+       },
+};
+
+module_platform_driver(xlnx_rtc_driver);
+
+MODULE_DESCRIPTION("Xilinx Zynq MPSoC RTC driver");
+MODULE_AUTHOR("Xilinx Inc.");
+MODULE_LICENSE("GPL v2");