static inline void emac_report_timeout_error(struct emac_instance *dev,
const char *error)
{
- if (net_ratelimit())
+ if (emac_has_feature(dev, EMAC_FTR_440GX_PHY_CLK_FIX |
+ EMAC_FTR_440EP_PHY_CLK_FIX))
+ DBG(dev, "%s" NL, error);
+ else if (net_ratelimit())
printk(KERN_ERR "%s: %s\n", dev->ndev->name, error);
}
+/* EMAC PHY clock workaround:
+ * 440EP/440GR has more sane SDR0_MFR register implementation than 440GX,
+ * which allows controlling each EMAC clock
+ */
+static inline void emac_rx_clk_tx(struct emac_instance *dev)
+{
+#ifdef CONFIG_PPC_DCR_NATIVE
+ if (emac_has_feature(dev, EMAC_FTR_440EP_PHY_CLK_FIX))
+ dcri_clrset(SDR0, SDR0_MFR,
+ 0, SDR0_MFR_ECS >> dev->cell_index);
+#endif
+}
+
+static inline void emac_rx_clk_default(struct emac_instance *dev)
+{
+#ifdef CONFIG_PPC_DCR_NATIVE
+ if (emac_has_feature(dev, EMAC_FTR_440EP_PHY_CLK_FIX))
+ dcri_clrset(SDR0, SDR0_MFR,
+ SDR0_MFR_ECS >> dev->cell_index, 0);
+#endif
+}
+
/* PHY polling intervals */
#define PHY_POLL_LINK_ON HZ
#define PHY_POLL_LINK_OFF (HZ / 5)
int link_poll_interval;
if (dev->phy.def->ops->poll_link(&dev->phy)) {
dev->phy.def->ops->read_link(&dev->phy);
+ emac_rx_clk_default(dev);
netif_carrier_on(dev->ndev);
link_poll_interval = PHY_POLL_LINK_ON;
} else {
+ emac_rx_clk_tx(dev);
netif_carrier_off(dev->ndev);
link_poll_interval = PHY_POLL_LINK_OFF;
}
if (dev->phy.def->ops->poll_link(&dev->phy)) {
if (!netif_carrier_ok(dev->ndev)) {
+ emac_rx_clk_default(dev);
/* Get new link parameters */
dev->phy.def->ops->read_link(&dev->phy);
link_poll_interval = PHY_POLL_LINK_ON;
} else {
if (netif_carrier_ok(dev->ndev)) {
+ emac_rx_clk_tx(dev);
netif_carrier_off(dev->ndev);
netif_tx_disable(dev->ndev);
emac_reinitialize(dev);
#ifdef CONFIG_PPC_DCR_NATIVE
if (emac_has_feature(dev, EMAC_FTR_440GX_PHY_CLK_FIX))
dcri_clrset(SDR0, SDR0_MFR, 0, SDR0_MFR_ECS);
+#endif
+ /* PHY clock workaround */
+ emac_rx_clk_tx(dev);
+
+ /* Enable internal clock source on 440GX*/
+#ifdef CONFIG_PPC_DCR_NATIVE
+ if (emac_has_feature(dev, EMAC_FTR_440GX_PHY_CLK_FIX))
+ dcri_clrset(SDR0, SDR0_MFR, 0, SDR0_MFR_ECS);
#endif
/* Configure EMAC with defaults so we can at least use MDIO
* This is needed mostly for 440GX
dev->features |= EMAC_FTR_EMAC4;
if (of_device_is_compatible(np, "ibm,emac-440gx"))
dev->features |= EMAC_FTR_440GX_PHY_CLK_FIX;
+ } else {
+ if (of_device_is_compatible(np, "ibm,emac-440ep") ||
+ of_device_is_compatible(np, "ibm,emac-440gr"))
+ dev->features |= EMAC_FTR_440EP_PHY_CLK_FIX;
}
/* Fixup some feature bits based on the device tree */