ARM: dts: remove STiH41x-b2020.dtsi

Since v4.8, STiH415/416 clock support has
been removed [1], these platform doesn't boot.
We can remove DTS files related to these socs.

[1] https://patchwork.kernel.org/patch/9157571/

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>

diff --git a/arch/arm/boot/dts/stih41x-b2020.dtsi b/arch/arm/boot/dts/stih41x-b2020.dtsi
deleted file mode 100644 (file)
index 322e0e9..0000000
--- a/arch/arm/boot/dts/stih41x-b2020.dtsi
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-#include "stih41x-b2020x.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-/ {
-       memory{
-               device_type = "memory";
-               reg = <0x40000000 0x80000000>;
-       };
-
-       chosen {
-               bootargs = "console=ttyAS0,115200 clk_ignore_unused";
-               linux,stdout-path = &sbc_serial1;
-       };
-
-       aliases {
-               ttyAS0 = &sbc_serial1;
-               ethernet1 = &ethernet1;
-       };
-       soc {
-               sbc_serial1: serial@fe531000 {
-                       status = "okay";
-               };
-
-               leds {
-                       compatible      = "gpio-leds";
-                       red {
-                               label   = "Front Panel LED";
-                               gpios   = <&pio4 1 GPIO_ACTIVE_HIGH>;
-                               linux,default-trigger   = "heartbeat";
-                       };
-                       green {
-                               gpios   = <&pio4 7 GPIO_ACTIVE_HIGH>;
-                               default-state = "off";
-                       };
-               };
-
-               i2c@fed40000 {
-                       status = "okay";
-               };
-
-               /* HDMI Tx I2C */
-               i2c@fed41000 {
-                       /* HDMI V1.3a supports Standard mode only */
-                       clock-frequency = <100000>;
-                       i2c-min-scl-pulse-width-us = <0>;
-                       i2c-min-sda-pulse-width-us = <5>;
-
-                       status = "okay";
-               };
-
-               i2c@fe540000 {
-                       status = "okay";
-               };
-
-               i2c@fe541000 {
-                       status = "okay";
-               };
-
-               ethernet1: dwmac@fef08000 {
-                       status                  = "okay";
-                       phy-mode                = "rgmii-id";
-                       max-speed               = <1000>;
-                       st,tx-retime-src        = "clk_125";
-                       snps,reset-gpio         = <&pio3 0>;
-                       snps,reset-active-low;
-                       snps,reset-delays-us    = <0 10000 10000>;
-
-                       pinctrl-0       = <&pinctrl_rgmii1>;
-               };
-
-               mmc0: sdhci@fe81e000 {
-                       bus-width = <8>;
-               };
-       };
-};