b43: N-PHY: add running samples
authorRafał Miłecki <zajec5@gmail.com>
Fri, 22 Jan 2010 00:53:14 +0000 (01:53 +0100)
committerJohn W. Linville <linville@tuxdriver.com>
Fri, 22 Jan 2010 21:11:38 +0000 (16:11 -0500)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/b43/phy_n.c

index d3c9783b76bac0dc08fd02c684f181059d528b75..f5900f04ff5c77b2fb352bf95f6c2c66a194b3c2 100644 (file)
@@ -816,6 +816,66 @@ static void b43_nphy_stop_playback(struct b43_wldev *dev)
                b43_nphy_stay_in_carrier_search(dev, 0);
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RunSamples */
+static void b43_nphy_run_samples(struct b43_wldev *dev, u16 samps, u16 loops,
+                                       u16 wait, bool iqmode, bool dac_test)
+{
+       struct b43_phy_n *nphy = dev->phy.n;
+       int i;
+       u16 seq_mode;
+       u32 tmp;
+
+       if (nphy->hang_avoid)
+               b43_nphy_stay_in_carrier_search(dev, true);
+
+       if ((nphy->bb_mult_save & 0x80000000) == 0) {
+               tmp = b43_ntab_read(dev, B43_NTAB16(15, 87));
+               nphy->bb_mult_save = (tmp & 0xFFFF) | 0x80000000;
+       }
+
+       if (!dev->phy.is_40mhz)
+               tmp = 0x6464;
+       else
+               tmp = 0x4747;
+       b43_ntab_write(dev, B43_NTAB16(15, 87), tmp);
+
+       if (nphy->hang_avoid)
+               b43_nphy_stay_in_carrier_search(dev, false);
+
+       b43_phy_write(dev, B43_NPHY_SAMP_DEPCNT, (samps - 1));
+
+       if (loops != 0xFFFF)
+               b43_phy_write(dev, B43_NPHY_SAMP_LOOPCNT, (loops - 1));
+       else
+               b43_phy_write(dev, B43_NPHY_SAMP_LOOPCNT, loops);
+
+       b43_phy_write(dev, B43_NPHY_SAMP_WAITCNT, wait);
+
+       seq_mode = b43_phy_read(dev, B43_NPHY_RFSEQMODE);
+
+       b43_phy_set(dev, B43_NPHY_RFSEQMODE, B43_NPHY_RFSEQMODE_CAOVER);
+       if (iqmode) {
+               b43_phy_mask(dev, B43_NPHY_IQLOCAL_CMDGCTL, 0x7FFF);
+               b43_phy_set(dev, B43_NPHY_IQLOCAL_CMDGCTL, 0x8000);
+       } else {
+               if (dac_test)
+                       b43_phy_write(dev, B43_NPHY_SAMP_CMD, 5);
+               else
+                       b43_phy_write(dev, B43_NPHY_SAMP_CMD, 1);
+       }
+       for (i = 0; i < 100; i++) {
+               if (b43_phy_read(dev, B43_NPHY_RFSEQST) & 1) {
+                       i = 0;
+                       break;
+               }
+               udelay(10);
+       }
+       if (i)
+               b43err(dev->wl, "run samples timeout\n");
+
+       b43_phy_write(dev, B43_NPHY_RFSEQMODE, seq_mode);
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/TxPwrCtrlCoefSetup */
 static void b43_nphy_tx_pwr_ctrl_coef_setup(struct b43_wldev *dev)
 {
@@ -1869,8 +1929,8 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
                freq = 5000;
 
        if (nphy->mphase_cal_phase_id > 2)
-               ;/* TODO: Call N PHY Run Samples with (band width * 8),
-                       0xFFFF, 0, 1, 0 as arguments */
+               b43_nphy_run_samples(dev, (dev->phy.is_40mhz ? 40 : 20) * 8,
+                                       0xFFFF, 0, true, false);
        else
                ;/* TODO: Call N PHY TX Tone with freq, 250, 1, 0 as arguments
                        and save result as error */
@@ -2162,8 +2222,8 @@ static int b43_nphy_rev2_cal_rx_iq(struct b43_wldev *dev,
                                        as arguments and save result as ret */
                                playtone = false;
                        } else {
-                               /* TODO: Call N PHY Run Samples with 160,
-                                       0xFFFF, 0, 0, 0 as arguments */
+                               b43_nphy_run_samples(dev, 160, 0xFFFF, 0,
+                                                       false, false);
                        }
 
                        if (ret == 0) {