ARM: dts: imx6*-hummingboard: use proper gpio flags definitions

Use proper gpio flag definitions for GPIOs rather than using opaque
uninformative numbers.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
index 6dd0b764e036d1c51cdde3015c1a2cc56178a999..aa5607789ef19e7e5cfa5e53148390f23b7dddbe 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
@@ -48,7 +48,7 @@
 
        ir_recv: ir-receiver {
                compatible = "gpio-ir-receiver";
-               gpios = <&gpio3 5 1>;
+               gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_hummingboard_gpio3_5>;
        };
@@ -67,7 +67,7 @@
                reg_usbh1_vbus: usb-h1-vbus {
                        compatible = "regulator-fixed";
                        enable-active-high;
-                       gpio = <&gpio1 0 0>;
+                       gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
                        pinctrl-names = "default";
                        pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>;
                        regulator-name = "usb_h1_vbus";
@@ -78,7 +78,7 @@
                reg_usbotg_vbus: usb-otg-vbus {
                        compatible = "regulator-fixed";
                        enable-active-high;
-                       gpio = <&gpio3 22 0>;
+                       gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
                        pinctrl-names = "default";
                        pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>;
                        regulator-name = "usb_otg_vbus";