obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o
obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o
obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o
-obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-fuloong2e.o
+obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-loongson2.o
+obj-$(CONFIG_LEMOTE_MACH2F) += fixup-lemote2f.o ops-loongson2.o
obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o
obj-$(CONFIG_PMC_MSP7120_GW) += fixup-pmcmsp.o ops-pmcmsp.o
obj-$(CONFIG_PMC_MSP7120_EVAL) += fixup-pmcmsp.o ops-pmcmsp.o
--- /dev/null
+/*
+ * Copyright (C) 2008 Lemote Technology
+ * Copyright (C) 2004 ICT CAS
+ * Author: Li xiaoyu, lixy@ict.ac.cn
+ *
+ * Copyright (C) 2007 Lemote, Inc.
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <loongson.h>
+#include <cs5536/cs5536.h>
+#include <cs5536/cs5536_pci.h>
+
+/* PCI interrupt pins
+ *
+ * These should not be changed, or you should consider loongson2f interrupt
+ * register and your pci card dispatch
+ */
+
+#define PCIA 4
+#define PCIB 5
+#define PCIC 6
+#define PCID 7
+
+/* all the pci device has the PCIA pin, check the datasheet. */
+static char irq_tab[][5] __initdata = {
+ /* INTA INTB INTC INTD */
+ {0, 0, 0, 0, 0}, /* 11: Unused */
+ {0, 0, 0, 0, 0}, /* 12: Unused */
+ {0, 0, 0, 0, 0}, /* 13: Unused */
+ {0, 0, 0, 0, 0}, /* 14: Unused */
+ {0, 0, 0, 0, 0}, /* 15: Unused */
+ {0, 0, 0, 0, 0}, /* 16: Unused */
+ {0, PCIA, 0, 0, 0}, /* 17: RTL8110-0 */
+ {0, PCIB, 0, 0, 0}, /* 18: RTL8110-1 */
+ {0, PCIC, 0, 0, 0}, /* 19: SiI3114 */
+ {0, PCID, 0, 0, 0}, /* 20: 3-ports nec usb */
+ {0, PCIA, PCIB, PCIC, PCID}, /* 21: PCI-SLOT */
+ {0, 0, 0, 0, 0}, /* 22: Unused */
+ {0, 0, 0, 0, 0}, /* 23: Unused */
+ {0, 0, 0, 0, 0}, /* 24: Unused */
+ {0, 0, 0, 0, 0}, /* 25: Unused */
+ {0, 0, 0, 0, 0}, /* 26: Unused */
+ {0, 0, 0, 0, 0}, /* 27: Unused */
+};
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int virq;
+
+ if ((PCI_SLOT(dev->devfn) != PCI_IDSEL_CS5536)
+ && (PCI_SLOT(dev->devfn) < 32)) {
+ virq = irq_tab[slot][pin];
+ printk(KERN_INFO "slot: %d, pin: %d, irq: %d\n", slot, pin,
+ virq + LOONGSON_IRQ_BASE);
+ if (virq != 0)
+ return LOONGSON_IRQ_BASE + virq;
+ else
+ return 0;
+ } else if (PCI_SLOT(dev->devfn) == PCI_IDSEL_CS5536) { /* cs5536 */
+ switch (PCI_FUNC(dev->devfn)) {
+ case 2:
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
+ CS5536_IDE_INTR);
+ return CS5536_IDE_INTR; /* for IDE */
+ case 3:
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
+ CS5536_ACC_INTR);
+ return CS5536_ACC_INTR; /* for AUDIO */
+ case 4: /* for OHCI */
+ case 5: /* for EHCI */
+ case 6: /* for UDC */
+ case 7: /* for OTG */
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
+ CS5536_USB_INTR);
+ return CS5536_USB_INTR;
+ }
+ return dev->irq;
+ } else {
+ printk(KERN_INFO " strange pci slot number.\n");
+ return 0;
+ }
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
+
+/* CS5536 SPEC. fixup */
+static void __init loongson_cs5536_isa_fixup(struct pci_dev *pdev)
+{
+ /* the uart1 and uart2 interrupt in PIC is enabled as default */
+ pci_write_config_dword(pdev, PCI_UART1_INT_REG, 1);
+ pci_write_config_dword(pdev, PCI_UART2_INT_REG, 1);
+}
+
+static void __init loongson_cs5536_ide_fixup(struct pci_dev *pdev)
+{
+ /* setting the mutex pin as IDE function */
+ pci_write_config_dword(pdev, PCI_IDE_CFG_REG,
+ CS5536_IDE_FLASH_SIGNATURE);
+}
+
+static void __init loongson_cs5536_acc_fixup(struct pci_dev *pdev)
+{
+ /* enable the AUDIO interrupt in PIC */
+ pci_write_config_dword(pdev, PCI_ACC_INT_REG, 1);
+
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xc0);
+}
+
+static void __init loongson_cs5536_ohci_fixup(struct pci_dev *pdev)
+{
+ /* enable the OHCI interrupt in PIC */
+ /* THE OHCI, EHCI, UDC, OTG are shared with interrupt in PIC */
+ pci_write_config_dword(pdev, PCI_OHCI_INT_REG, 1);
+}
+
+static void __init loongson_cs5536_ehci_fixup(struct pci_dev *pdev)
+{
+ u32 hi, lo;
+
+ /* Serial short detect enable */
+ _rdmsr(USB_MSR_REG(USB_CONFIG), &hi, &lo);
+ _wrmsr(USB_MSR_REG(USB_CONFIG), (1 << 1) | (1 << 2) | (1 << 3), lo);
+
+ /* setting the USB2.0 micro frame length */
+ pci_write_config_dword(pdev, PCI_EHCI_FLADJ_REG, 0x2000);
+}
+
+static void __init loongson_nec_fixup(struct pci_dev *pdev)
+{
+ unsigned int val;
+
+ pci_read_config_dword(pdev, 0xe0, &val);
+ /* Only 2 port be used */
+ pci_write_config_dword(pdev, 0xe0, (val & ~3) | 0x2);
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA,
+ loongson_cs5536_isa_fixup);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_OHC,
+ loongson_cs5536_ohci_fixup);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_EHC,
+ loongson_cs5536_ehci_fixup);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_AUDIO,
+ loongson_cs5536_acc_fixup);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_IDE,
+ loongson_cs5536_ide_fixup);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
+ loongson_nec_fixup);
+++ /dev/null
-/*
- * fuloong2e specific PCI support.
- *
- * Copyright (C) 1999, 2000, 2004 MIPS Technologies, Inc.
- * All rights reserved.
- * Authors: Carsten Langgaard <carstenl@mips.com>
- * Maciej W. Rozycki <macro@mips.com>
- *
- * Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin <wuzj@lemote.com>
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <loongson.h>
-
-#define PCI_ACCESS_READ 0
-#define PCI_ACCESS_WRITE 1
-
-#define CFG_SPACE_REG(offset) \
- (void *)CKSEG1ADDR(LOONGSON_PCICFG_BASE | (offset))
-#define ID_SEL_BEGIN 11
-#define MAX_DEV_NUM (31 - ID_SEL_BEGIN)
-
-
-static int loongson_pcibios_config_access(unsigned char access_type,
- struct pci_bus *bus,
- unsigned int devfn, int where,
- u32 *data)
-{
- u32 busnum = bus->number;
- u32 addr, type;
- u32 dummy;
- void *addrp;
- int device = PCI_SLOT(devfn);
- int function = PCI_FUNC(devfn);
- int reg = where & ~3;
-
- if (busnum == 0) {
- /* Type 0 configuration for onboard PCI bus */
- if (device > MAX_DEV_NUM)
- return -1;
-
- addr = (1 << (device + ID_SEL_BEGIN)) | (function << 8) | reg;
- type = 0;
- } else {
- /* Type 1 configuration for offboard PCI bus */
- addr = (busnum << 16) | (device << 11) | (function << 8) | reg;
- type = 0x10000;
- }
-
- /* Clear aborts */
- LOONGSON_PCICMD |= LOONGSON_PCICMD_MABORT_CLR | \
- LOONGSON_PCICMD_MTABORT_CLR;
-
- LOONGSON_PCIMAP_CFG = (addr >> 16) | type;
-
- /* Flush Bonito register block */
- dummy = LOONGSON_PCIMAP_CFG;
- mmiowb();
-
- addrp = CFG_SPACE_REG(addr & 0xffff);
- if (access_type == PCI_ACCESS_WRITE)
- writel(cpu_to_le32(*data), addrp);
- else
- *data = le32_to_cpu(readl(addrp));
-
- /* Detect Master/Target abort */
- if (LOONGSON_PCICMD & (LOONGSON_PCICMD_MABORT_CLR |
- LOONGSON_PCICMD_MTABORT_CLR)) {
- /* Error occurred */
-
- /* Clear bits */
- LOONGSON_PCICMD |= (LOONGSON_PCICMD_MABORT_CLR |
- LOONGSON_PCICMD_MTABORT_CLR);
-
- return -1;
- }
-
- return 0;
-
-}
-
-
-/*
- * We can't address 8 and 16 bit words directly. Instead we have to
- * read/write a 32bit word and mask/modify the data we actually want.
- */
-static int loongson_pcibios_read(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *val)
-{
- u32 data = 0;
-
- if ((size == 2) && (where & 1))
- return PCIBIOS_BAD_REGISTER_NUMBER;
- else if ((size == 4) && (where & 3))
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- if (loongson_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where,
- &data))
- return -1;
-
- if (size == 1)
- *val = (data >> ((where & 3) << 3)) & 0xff;
- else if (size == 2)
- *val = (data >> ((where & 3) << 3)) & 0xffff;
- else
- *val = data;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int loongson_pcibios_write(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
-{
- u32 data = 0;
-
- if ((size == 2) && (where & 1))
- return PCIBIOS_BAD_REGISTER_NUMBER;
- else if ((size == 4) && (where & 3))
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- if (size == 4)
- data = val;
- else {
- if (loongson_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
- where, &data))
- return -1;
-
- if (size == 1)
- data = (data & ~(0xff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
- else if (size == 2)
- data = (data & ~(0xffff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
- }
-
- if (loongson_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, where,
- &data))
- return -1;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops loongson_pci_ops = {
- .read = loongson_pcibios_read,
- .write = loongson_pcibios_write
-};
--- /dev/null
+/*
+ * fuloong2e specific PCI support.
+ *
+ * Copyright (C) 1999, 2000, 2004 MIPS Technologies, Inc.
+ * All rights reserved.
+ * Authors: Carsten Langgaard <carstenl@mips.com>
+ * Maciej W. Rozycki <macro@mips.com>
+ *
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin <wuzj@lemote.com>
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <loongson.h>
+
+#ifdef CONFIG_CS5536
+#include <cs5536/cs5536_pci.h>
+#include <cs5536/cs5536.h>
+#endif
+
+#define PCI_ACCESS_READ 0
+#define PCI_ACCESS_WRITE 1
+
+#define CFG_SPACE_REG(offset) \
+ (void *)CKSEG1ADDR(LOONGSON_PCICFG_BASE | (offset))
+#define ID_SEL_BEGIN 11
+#define MAX_DEV_NUM (31 - ID_SEL_BEGIN)
+
+
+static int loongson_pcibios_config_access(unsigned char access_type,
+ struct pci_bus *bus,
+ unsigned int devfn, int where,
+ u32 *data)
+{
+ u32 busnum = bus->number;
+ u32 addr, type;
+ u32 dummy;
+ void *addrp;
+ int device = PCI_SLOT(devfn);
+ int function = PCI_FUNC(devfn);
+ int reg = where & ~3;
+
+ if (busnum == 0) {
+ /* board-specific part,currently,only fuloong2f,yeeloong2f
+ * use CS5536, fuloong2e use via686b, gdium has no
+ * south bridge
+ */
+#ifdef CONFIG_CS5536
+ /* cs5536_pci_conf_read4/write4() will call _rdmsr/_wrmsr() to
+ * access the regsters PCI_MSR_ADDR, PCI_MSR_DATA_LO,
+ * PCI_MSR_DATA_HI, which is bigger than PCI_MSR_CTRL, so, it
+ * will not go this branch, but the others. so, no calling dead
+ * loop here.
+ */
+ if ((PCI_IDSEL_CS5536 == device) && (reg < PCI_MSR_CTRL)) {
+ switch (access_type) {
+ case PCI_ACCESS_READ:
+ *data = cs5536_pci_conf_read4(function, reg);
+ break;
+ case PCI_ACCESS_WRITE:
+ cs5536_pci_conf_write4(function, reg, *data);
+ break;
+ }
+ return 0;
+ }
+#endif
+ /* Type 0 configuration for onboard PCI bus */
+ if (device > MAX_DEV_NUM)
+ return -1;
+
+ addr = (1 << (device + ID_SEL_BEGIN)) | (function << 8) | reg;
+ type = 0;
+ } else {
+ /* Type 1 configuration for offboard PCI bus */
+ addr = (busnum << 16) | (device << 11) | (function << 8) | reg;
+ type = 0x10000;
+ }
+
+ /* Clear aborts */
+ LOONGSON_PCICMD |= LOONGSON_PCICMD_MABORT_CLR | \
+ LOONGSON_PCICMD_MTABORT_CLR;
+
+ LOONGSON_PCIMAP_CFG = (addr >> 16) | type;
+
+ /* Flush Bonito register block */
+ dummy = LOONGSON_PCIMAP_CFG;
+ mmiowb();
+
+ addrp = CFG_SPACE_REG(addr & 0xffff);
+ if (access_type == PCI_ACCESS_WRITE)
+ writel(cpu_to_le32(*data), addrp);
+ else
+ *data = le32_to_cpu(readl(addrp));
+
+ /* Detect Master/Target abort */
+ if (LOONGSON_PCICMD & (LOONGSON_PCICMD_MABORT_CLR |
+ LOONGSON_PCICMD_MTABORT_CLR)) {
+ /* Error occurred */
+
+ /* Clear bits */
+ LOONGSON_PCICMD |= (LOONGSON_PCICMD_MABORT_CLR |
+ LOONGSON_PCICMD_MTABORT_CLR);
+
+ return -1;
+ }
+
+ return 0;
+
+}
+
+
+/*
+ * We can't address 8 and 16 bit words directly. Instead we have to
+ * read/write a 32bit word and mask/modify the data we actually want.
+ */
+static int loongson_pcibios_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ u32 data = 0;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ if (loongson_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where,
+ &data))
+ return -1;
+
+ if (size == 1)
+ *val = (data >> ((where & 3) << 3)) & 0xff;
+ else if (size == 2)
+ *val = (data >> ((where & 3) << 3)) & 0xffff;
+ else
+ *val = data;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int loongson_pcibios_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ u32 data = 0;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ if (size == 4)
+ data = val;
+ else {
+ if (loongson_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
+ where, &data))
+ return -1;
+
+ if (size == 1)
+ data = (data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else if (size == 2)
+ data = (data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ }
+
+ if (loongson_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, where,
+ &data))
+ return -1;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops loongson_pci_ops = {
+ .read = loongson_pcibios_read,
+ .write = loongson_pcibios_write
+};
+
+#ifdef CONFIG_CS5536
+void _rdmsr(u32 msr, u32 *hi, u32 *lo)
+{
+ struct pci_bus bus = {
+ .number = PCI_BUS_CS5536
+ };
+ u32 devfn = PCI_DEVFN(PCI_IDSEL_CS5536, 0);
+ loongson_pcibios_write(&bus, devfn, PCI_MSR_ADDR, 4, msr);
+ loongson_pcibios_read(&bus, devfn, PCI_MSR_DATA_LO, 4, lo);
+ loongson_pcibios_read(&bus, devfn, PCI_MSR_DATA_HI, 4, hi);
+}
+EXPORT_SYMBOL(_rdmsr);
+
+void _wrmsr(u32 msr, u32 hi, u32 lo)
+{
+ struct pci_bus bus = {
+ .number = PCI_BUS_CS5536
+ };
+ u32 devfn = PCI_DEVFN(PCI_IDSEL_CS5536, 0);
+ loongson_pcibios_write(&bus, devfn, PCI_MSR_ADDR, 4, msr);
+ loongson_pcibios_write(&bus, devfn, PCI_MSR_DATA_LO, 4, lo);
+ loongson_pcibios_write(&bus, devfn, PCI_MSR_DATA_HI, 4, hi);
+}
+EXPORT_SYMBOL(_wrmsr);
+#endif
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff