ARM: dts: sun6i: Add new sun6i-a31-m9 dts file for Mele M9

Add a new sun6i-a31-m9 dts file for the Mele M9 / Mele A1000G Quad. These
HTPCs use the same board in a different case, for more details see:
http://linux-sunxi.org/Mele_M9

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 35c146f31e46effa1b3b64cd69fd3a3b76ab38cb..1cd137dc69e5d87f0654e1a2ef4f4af25542cb63 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -351,6 +351,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \
        sun5i-a13-olinuxino.dtb \
        sun5i-a13-olinuxino-micro.dtb \
        sun6i-a31-colombus.dtb \
+       sun6i-a31-m9.dtb \
        sun7i-a20-cubieboard2.dtb \
        sun7i-a20-cubietruck.dtb \
        sun7i-a20-olinuxino-micro.dtb

diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts
new file mode 100644 (file)
index 0000000..22eacf8
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31-m9.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun6i-a31.dtsi"
+
+/ {
+       model = "Mele M9 / A1000G Quad top set box";
+       compatible = "mele,m9", "allwinner,sun6i-a31";
+
+       chosen {
+               bootargs = "earlyprintk console=ttyS0,115200";
+       };
+
+       soc@01c00000 {
+               mmc0: mmc@01c0f000 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
+                       bus-width = <4>;
+                       cd-gpios = <&pio 7 22 0>; /* PH22 */
+                       cd-inverted;
+                       status = "okay";
+               };
+
+               pio: pinctrl@01c20800 {
+                       mmc0_cd_pin_m9: mmc0_cd_pin@0 {
+                               allwinner,pins = "PH22";
+                               allwinner,function = "gpio_in";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <1>;
+                       };
+               };
+
+               uart0: serial@01c28000 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&uart0_pins_a>;
+                       status = "okay";
+               };
+       };
+};