rtlwifi: rtl8192c-common: Remove all instances of DBG_EMERG

This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c
index 9c3392ad01bcd333fe35364b05220f571091ca49..f3fb31b9d9dc552296216bb69a9647e2ac6df07d 100644 (file)
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c
@@ -145,10 +145,8 @@ static void _rtl92c_write_fw(struct ieee80211_hw *hw,
                pageNums = size / FW_8192C_PAGE_SIZE;
                remainsize = size % FW_8192C_PAGE_SIZE;
 
-               if (pageNums > 4) {
-                       RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                                "Page numbers should not greater then 4\n");
-               }
+               if (pageNums > 4)
+                       pr_err("Page numbers should not greater then 4\n");
 
                for (page = 0; page < pageNums; page++) {
                        offset = page * FW_8192C_PAGE_SIZE;
@@ -180,15 +178,10 @@ static int _rtl92c_fw_free_to_go(struct ieee80211_hw *hw)
                 (!(value32 & FWDL_ChkSum_rpt)));
 
        if (counter >= FW_8192C_POLLING_TIMEOUT_COUNT) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "chksum report faill ! REG_MCUFWDL:0x%08x .\n",
-                         value32);
+               pr_err("chksum report fail! REG_MCUFWDL:0x%08x .\n",
+                      value32);
                goto exit;
        }
-
-       RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
-                "Checksum report OK ! REG_MCUFWDL:0x%08x .\n", value32);
-
        value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
        value32 |= MCUFWDL_RDY;
        value32 &= ~WINTINI_RDY;
@@ -198,20 +191,15 @@ static int _rtl92c_fw_free_to_go(struct ieee80211_hw *hw)
 
        do {
                value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
-               if (value32 & WINTINI_RDY) {
-                       RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
-                                "Polling FW ready success!! REG_MCUFWDL:0x%08x .\n",
-                                       value32);
-                       err = 0;
-                       goto exit;
-               }
+               if (value32 & WINTINI_RDY)
+                       return 0;
 
                mdelay(FW_8192C_POLLING_DELAY);
 
        } while (counter++ < FW_8192C_POLLING_TIMEOUT_COUNT);
 
-       RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                "Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n", value32);
+       pr_err("Polling FW ready fail! REG_MCUFWDL:0x%08x.\n",
+              value32);
 
 exit:
        return err;
@@ -251,8 +239,7 @@ int rtl92c_download_fw(struct ieee80211_hw *hw)
 
        err = _rtl92c_fw_free_to_go(hw);
        if (err) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "Firmware is not ready to run!\n");
+               pr_err("Firmware is not ready to run!\n");
        } else {
                RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
                         "Firmware is ready to run!\n");
@@ -327,8 +314,7 @@ static void _rtl92c_fill_h2c_command(struct ieee80211_hw *hw,
        while (!bwrite_sucess) {
                wait_writeh2c_limmit--;
                if (wait_writeh2c_limmit == 0) {
-                       RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                                "Write H2C fail because no trigger for FW INT!\n");
+                       pr_err("Write H2C fail because no trigger for FW INT!\n");
                        break;
                }
 

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c
index 32fc4b60bc8649230c33039e14292dc2bdc42a0f..7c6e5d91439d0816bfab371bacbaf7542cb2b7c6 100644 (file)
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c
@@ -104,7 +104,7 @@ u32 _rtl92c_phy_rf_serial_read(struct ieee80211_hw *hw,
        offset &= 0x3f;
        newoffset = offset;
        if (RT_CANNOT_IO(hw)) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "return all one\n");
+               pr_err("return all one\n");
                return 0xFFFFFFFF;
        }
        tmplong = rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD);
@@ -152,7 +152,7 @@ void _rtl92c_phy_rf_serial_write(struct ieee80211_hw *hw,
        struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath];
 
        if (RT_CANNOT_IO(hw)) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "stop\n");
+               pr_err("stop\n");
                return;
        }
        offset &= 0x3f;
@@ -209,7 +209,7 @@ bool _rtl92c_phy_bb8192c_config_parafile(struct ieee80211_hw *hw)
        rtstatus = rtlpriv->cfg->ops->config_bb_with_headerfile(hw,
                                                 BASEBAND_CONFIG_PHY_REG);
        if (!rtstatus) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Write BB Reg Fail!!\n");
+               pr_err("Write BB Reg Fail!!\n");
                return false;
        }
        if (rtlphy->rf_type == RF_1T2R) {
@@ -222,13 +222,13 @@ bool _rtl92c_phy_bb8192c_config_parafile(struct ieee80211_hw *hw)
                                                   BASEBAND_CONFIG_PHY_REG);
        }
        if (!rtstatus) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "BB_PG Reg Fail!!\n");
+               pr_err("BB_PG Reg Fail!!\n");
                return false;
        }
        rtstatus = rtlpriv->cfg->ops->config_bb_with_headerfile(hw,
                                                 BASEBAND_CONFIG_AGC_TAB);
        if (!rtstatus) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "AGC Table Fail\n");
+               pr_err("AGC Table Fail\n");
                return false;
        }
        rtlphy->cck_high_power =
@@ -860,8 +860,8 @@ bool _rtl92c_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
                        currentcmd = &postcommoncmd[*step];
                        break;
                default:
-                       RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                                "Invalid 'stage' = %d, Check it!\n", *stage);
+                       pr_err("Invalid 'stage' = %d, Check it!\n",
+                              *stage);
                        return true;
                }