arm: dts: mt7623: Add SD-card and EMMC to bananapi-r2

The bananapi-r2 board has an SD-card controller and built-in
EMMC storage so enables those devices in the devicetree.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index 9f3e6ddd545f097a243eb21cb6a237e8ddba7a69..444ed9318ed938e0d63b8720658f13ceff67ed64 100644 (file)
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -179,6 +179,32 @@
        status = "okay";
 };
 
+&mmc0 {
+       pinctrl-names = "default", "state_uhs";
+       pinctrl-0 = <&mmc0_pins_default>;
+       pinctrl-1 = <&mmc0_pins_uhs>;
+       status = "okay";
+       bus-width = <8>;
+       max-frequency = <50000000>;
+       cap-mmc-highspeed;
+       vmmc-supply = <&mt6323_vemc3v3_reg>;
+       vqmmc-supply = <&mt6323_vio18_reg>;
+       non-removable;
+};
+
+&mmc1 {
+       pinctrl-names = "default", "state_uhs";
+       pinctrl-0 = <&mmc1_pins_default>;
+       pinctrl-1 = <&mmc1_pins_uhs>;
+       status = "okay";
+       bus-width = <4>;
+       max-frequency = <50000000>;
+       cap-sd-highspeed;
+       cd-gpios = <&pio 261 0>;
+       vmmc-supply = <&mt6323_vmch_reg>;
+       vqmmc-supply = <&mt6323_vio18_reg>;
+};
+
 &pio {
        cir_pins_a:cir@0 {
                pins_cir {
@@ -314,6 +340,17 @@
                        bias-pull-down;
                        drive-strength = <MTK_DRIVE_4mA>;
                };
+
+               pins_wp {
+                       pinmux = <MT7623_PIN_29_EINT7_FUNC_MSDC1_WP>;
+                       input-enable;
+                       bias-pull-up;
+               };
+
+               pins_insert {
+                       pinmux = <MT7623_PIN_261_MSDC1_INS_FUNC_GPIO261>;
+                       bias-pull-up;
+               };
        };
 
        mmc1_pins_uhs: mmc1 {