/* Macros to access registers */
-/* FIFO status */
-#define RtdFifoStatus(dev) \
- readl(devpriv->las0+LAS0_ADC)
-
/* pacer start/stop read=start, write=stop*/
#define RtdPacerStart(dev) \
readl(devpriv->las0+LAS0_PACER)
/* trigger conversion */
writew(0, devpriv->las0 + LAS0_ADC);
udelay(1);
- fifo_status = RtdFifoStatus(dev);
+ fifo_status = readl(devpriv->las0 + LAS0_ADC);
if ((fifo_status & FS_ADC_HEMPTY) == 0) {
fifo_size = 2 * i;
break;
writew(0, devpriv->las0 + LAS0_ADC);
for (ii = 0; ii < RTD_ADC_TIMEOUT; ++ii) {
- stat = RtdFifoStatus(dev);
+ stat = readl(devpriv->las0 + LAS0_ADC);
if (stat & FS_ADC_NOT_EMPTY) /* 1 -> not empty */
break;
WAIT_QUIETLY;
continue;
}
#if 0
- if (0 == (RtdFifoStatus(dev) & FS_ADC_NOT_EMPTY)) { /* DEBUG */
+ if (!(readl(devpriv->las0 + LAS0_ADC) & FS_ADC_NOT_EMPTY)) {
DPRINTK("comedi: READ OOPS on %d of %d\n", ii + 1,
count);
break;
*/
static int ai_read_dregs(struct comedi_device *dev, struct comedi_subdevice *s)
{
- while (RtdFifoStatus(dev) & FS_ADC_NOT_EMPTY) { /* 1 -> not empty */
+ while (readl(devpriv->las0 + LAS0_ADC) & FS_ADC_NOT_EMPTY) {
short sample;
s16 d = readw(devpriv->las1 + LAS1_ADC_FIFO);
devpriv->intCount++; /* DEBUG statistics */
- fifoStatus = RtdFifoStatus(dev);
+ fifoStatus = readl(devpriv->las0 + LAS0_ADC);
/* check for FIFO full, this automatically halts the ADC! */
if (!(fifoStatus & FS_ADC_NOT_FULL)) { /* 0 -> full */
DPRINTK("rtd520: FIFO full! fifo_status=0x%x\n", (fifoStatus ^ 0x6666) & 0x7777); /* should be all 0s */
#endif /* USE_DMA */
if (devpriv->aiCount > 0) { /* there shouldn't be anything left */
- fifoStatus = RtdFifoStatus(dev);
+ fifoStatus = readl(devpriv->las0 + LAS0_ADC);
DPRINTK("rtd520: Finishing up. %ld remain, fifoStat=%x\n", devpriv->aiCount, (fifoStatus ^ 0x6666) & 0x7777); /* should read all 0s */
ai_read_dregs(dev, s); /* read anything left in FIFO */
}
RtdInterruptClearMask(dev, status);
RtdInterruptClear(dev);
- fifoStatus = RtdFifoStatus(dev); /* DEBUG */
+ fifoStatus = readl(devpriv->las0 + LAS0_ADC);
DPRINTK
("rtd520: Acquisition complete. %ld ints, intStat=%x, overStat=%x\n",
devpriv->intCount, status,
devpriv->aoValue[chan] = data[i]; /* save for read back */
for (ii = 0; ii < RTD_DAC_TIMEOUT; ++ii) {
- stat = RtdFifoStatus(dev);
+ stat = readl(devpriv->las0 + LAS0_ADC);
/* 1 -> not empty */
if (stat & ((0 == chan) ? FS_DAC1_NOT_EMPTY :
FS_DAC2_NOT_EMPTY))