xHCI: report USB3.0 portstatus comply with USB3.0 specification
authorAndiry Xu <andiry.xu@amd.com>
Wed, 27 Apr 2011 10:07:43 +0000 (18:07 +0800)
committerSarah Sharp <sarah.a.sharp@linux.intel.com>
Mon, 2 May 2011 23:42:53 +0000 (16:42 -0700)
USB3.0 specification has different wPortStatus and wPortChange definitions
from USB2.0 specification. Since USB3 root hub and USB2 root hub are split
now and USB3 hub only has USB3 protocol ports, we should modify the
portstatus and portchange report of USB3 ports to comply with USB3.0
specification.

Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
drivers/usb/core/hub.c
drivers/usb/host/xhci-hub.c

index 93720bdc9efd4a9ff2e4f0d01023f2432edd1f51..dcd78c15f8cd7849be721cb815112ec78168cdf4 100644 (file)
@@ -379,15 +379,6 @@ static int hub_port_status(struct usb_hub *hub, int port1,
                *status = le16_to_cpu(hub->status->port.wPortStatus);
                *change = le16_to_cpu(hub->status->port.wPortChange);
 
-               if ((hub->hdev->parent != NULL) &&
-                               hub_is_superspeed(hub->hdev)) {
-                       /* Translate the USB 3 port status */
-                       u16 tmp = *status & USB_SS_PORT_STAT_MASK;
-                       if (*status & USB_SS_PORT_STAT_POWER)
-                               tmp |= USB_PORT_STAT_POWER;
-                       *status = tmp;
-               }
-
                ret = 0;
        }
        mutex_unlock(&hub->status_mutex);
@@ -2160,11 +2151,40 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
        return status;
 }
 
+/* Check if a port is power on */
+static int port_is_power_on(struct usb_hub *hub, unsigned portstatus)
+{
+       int ret = 0;
+
+       if (hub_is_superspeed(hub->hdev)) {
+               if (portstatus & USB_SS_PORT_STAT_POWER)
+                       ret = 1;
+       } else {
+               if (portstatus & USB_PORT_STAT_POWER)
+                       ret = 1;
+       }
+
+       return ret;
+}
+
 #ifdef CONFIG_PM
 
-#define MASK_BITS      (USB_PORT_STAT_POWER | USB_PORT_STAT_CONNECTION | \
-                               USB_PORT_STAT_SUSPEND)
-#define WANT_BITS      (USB_PORT_STAT_POWER | USB_PORT_STAT_CONNECTION)
+/* Check if a port is suspended(USB2.0 port) or in U3 state(USB3.0 port) */
+static int port_is_suspended(struct usb_hub *hub, unsigned portstatus)
+{
+       int ret = 0;
+
+       if (hub_is_superspeed(hub->hdev)) {
+               if ((portstatus & USB_PORT_STAT_LINK_STATE)
+                               == USB_SS_PORT_LS_U3)
+                       ret = 1;
+       } else {
+               if (portstatus & USB_PORT_STAT_SUSPEND)
+                       ret = 1;
+       }
+
+       return ret;
+}
 
 /* Determine whether the device on a port is ready for a normal resume,
  * is ready for a reset-resume, or should be disconnected.
@@ -2174,7 +2194,9 @@ static int check_port_resume_type(struct usb_device *udev,
                int status, unsigned portchange, unsigned portstatus)
 {
        /* Is the device still present? */
-       if (status || (portstatus & MASK_BITS) != WANT_BITS) {
+       if (status || port_is_suspended(hub, portstatus) ||
+                       !port_is_power_on(hub, portstatus) ||
+                       !(portstatus & USB_PORT_STAT_CONNECTION)) {
                if (status >= 0)
                        status = -ENODEV;
        }
@@ -2439,7 +2461,7 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 
        /* Skip the initial Clear-Suspend step for a remote wakeup */
        status = hub_port_status(hub, port1, &portstatus, &portchange);
-       if (status == 0 && !(portstatus & USB_PORT_STAT_SUSPEND))
+       if (status == 0 && !port_is_suspended(hub, portstatus))
                goto SuspendCleared;
 
        // dev_dbg(hub->intfdev, "resume port %d\n", port1);
@@ -3147,7 +3169,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 
                /* maybe switch power back on (e.g. root hub was reset) */
                if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2
-                               && !(portstatus & USB_PORT_STAT_POWER))
+                               && !port_is_power_on(hub, portstatus))
                        set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
 
                if (portstatus & USB_PORT_STAT_ENABLE)
index b87535442386466fba2282e94108ea8fa4b5c24d..4a3ca99fc64ef749fa35199951b591d1326284cc 100644 (file)
@@ -431,9 +431,6 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
                }
                xhci_dbg(xhci, "get port status, actual port %d status  = 0x%x\n", wIndex, temp);
 
-               /* FIXME - should we return a port status value like the USB
-                * 3.0 external hubs do?
-                */
                /* wPortChange bits */
                if (temp & PORT_CSC)
                        status |= USB_PORT_STAT_C_CONNECTION << 16;
@@ -441,13 +438,21 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
                        status |= USB_PORT_STAT_C_ENABLE << 16;
                if ((temp & PORT_OCC))
                        status |= USB_PORT_STAT_C_OVERCURRENT << 16;
-               /*
-                * FIXME ignoring reset and USB 2.1/3.0 specific
-                * changes
-                */
-               if ((temp & PORT_PLS_MASK) == XDEV_U3
-                       && (temp & PORT_POWER))
-                       status |= 1 << USB_PORT_FEAT_SUSPEND;
+               if ((temp & PORT_RC))
+                       status |= USB_PORT_STAT_C_RESET << 16;
+               /* USB3.0 only */
+               if (hcd->speed == HCD_USB3) {
+                       if ((temp & PORT_PLC))
+                               status |= USB_PORT_STAT_C_LINK_STATE << 16;
+                       if ((temp & PORT_WRC))
+                               status |= USB_PORT_STAT_C_BH_RESET << 16;
+               }
+
+               if (hcd->speed != HCD_USB3) {
+                       if ((temp & PORT_PLS_MASK) == XDEV_U3
+                                       && (temp & PORT_POWER))
+                               status |= USB_PORT_STAT_SUSPEND;
+               }
                if ((temp & PORT_PLS_MASK) == XDEV_RESUME) {
                        if ((temp & PORT_RESET) || !(temp & PORT_PE))
                                goto error;
@@ -490,8 +495,20 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
                        status |= USB_PORT_STAT_OVERCURRENT;
                if (temp & PORT_RESET)
                        status |= USB_PORT_STAT_RESET;
-               if (temp & PORT_POWER)
-                       status |= USB_PORT_STAT_POWER;
+               if (temp & PORT_POWER) {
+                       if (hcd->speed == HCD_USB3)
+                               status |= USB_SS_PORT_STAT_POWER;
+                       else
+                               status |= USB_PORT_STAT_POWER;
+               }
+               /* Port Link State */
+               if (hcd->speed == HCD_USB3) {
+                       /* resume state is a xHCI internal state.
+                        * Do not report it to usb core.
+                        */
+                       if ((temp & PORT_PLS_MASK) != XDEV_RESUME)
+                               status |= (temp & PORT_PLS_MASK);
+               }
                if (bus_state->port_c_suspend & (1 << wIndex))
                        status |= 1 << USB_PORT_FEAT_C_SUSPEND;
                xhci_dbg(xhci, "Get port status returned 0x%x\n", status);