ARM: dts: am437x: Add touchscreen support for GP EVM

Add touchscreen support for AM437x GP EVM using pixcir
touchscreen controller.

CC: Benoit Cousson <bcousson@baylibre.com>
CC: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 9e57538bd66171616925d3758daea77a62db5f1d..c0cc5251fd4736e194e3fd09a5fa5483267f8f00 100644 (file)
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -81,6 +81,12 @@
                        0x164 MUX_MODE0       /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
                >;
        };
+
+       pixcir_ts_pins: pixcir_ts_pins {
+               pinctrl-single,pins = <
+                       0x264 (PIN_INPUT_PULLUP | MUX_MODE7)  /* spi2_d0.gpio3_22 */
+               >;
+       };
 };
 
 &i2c0 {
@@ -93,6 +99,20 @@
         status = "okay";
         pinctrl-names = "default";
         pinctrl-0 = <&i2c1_pins>;
+
+       pixcir_ts@5c {
+               compatible = "pixcir,pixcir_tangoc";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pixcir_ts_pins>;
+               reg = <0x5c>;
+               interrupt-parent = <&gpio3>;
+               interrupts = <22 0>;
+
+               attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+
+               x-size = <1024>;
+               y-size = <600>;
+       };
 };
 
 &epwmss0 {