V4L/DVB (3304): TDA10046 Driver update
authorHartmut Hackmann <hartmut.hackmann@t\-online.de>
Tue, 7 Feb 2006 08:49:10 +0000 (06:49 -0200)
committerMauro Carvalho Chehab <mchehab@infradead.org>
Tue, 7 Feb 2006 08:49:10 +0000 (06:49 -0200)
- Set outputs to tristate in sleep mode
- Reduce dangerously high firmware download speed with 16MHz xtal
- added tda827x configuration with GPIOs low
- added comments to stupid looking IIC reads that work around bugs in
  the tda10046.
- some minor updates

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
drivers/media/dvb/frontends/tda1004x.c
drivers/media/dvb/frontends/tda1004x.h

index c63e9a5084eb7ffcb1c50b9efebee1a0f85b946c..8e8df7b4ca0e595f8d28f710a273357ab37da3ad 100644 (file)
@@ -229,7 +229,7 @@ static int tda1004x_enable_tuner_i2c(struct tda1004x_state *state)
        dprintk("%s\n", __FUNCTION__);
 
        result = tda1004x_write_mask(state, TDA1004X_CONFC4, 2, 2);
-       msleep(1);
+       msleep(20);
        return result;
 }
 
@@ -502,7 +502,12 @@ static int tda10046_fwupload(struct dvb_frontend* fe)
        const struct firmware *fw;
 
        /* reset + wake up chip */
-       tda1004x_write_byteI(state, TDA1004X_CONFC4, 0);
+       if (state->config->xtal_freq == TDA10046_XTAL_4M) {
+               tda1004x_write_byteI(state, TDA1004X_CONFC4, 0);
+       } else {
+               dprintk("%s: 16MHz Xtal, reducing I2C speed\n", __FUNCTION__);
+               tda1004x_write_byteI(state, TDA1004X_CONFC4, 0x80);
+       }
        tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 1, 0);
        /* let the clocks recover from sleep */
        msleep(5);
@@ -651,7 +656,7 @@ static int tda10046_init(struct dvb_frontend* fe)
        // tda setup
        tda1004x_write_mask(state, TDA1004X_CONFC4, 0x20, 0); // disable DSP watchdog timer
        tda1004x_write_byteI(state, TDA1004X_AUTO, 0x87);    // 100 ppm crystal, select HP stream
-       tda1004x_write_byteI(state, TDA1004X_CONFC1, 8);      // disable pulse killer
+       tda1004x_write_byteI(state, TDA1004X_CONFC1, 0x88);      // enable pulse killer
 
        switch (state->config->agc_config) {
        case TDA10046_AGC_DEFAULT:
@@ -672,6 +677,12 @@ static int tda10046_init(struct dvb_frontend* fe)
                tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
                tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x6a); // set AGC polarities
                break;
+       case TDA10046_AGC_TDA827X_GPL:
+               tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02);   // AGC setup
+               tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70);    // AGC Threshold
+               tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
+               tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x60); // set AGC polarities
+               break;
        }
        tda1004x_write_byteI(state, TDA1004X_CONFADC2, 0x38);
        tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE1, 0x61); // Turn both AGC outputs on
@@ -683,6 +694,7 @@ static int tda10046_init(struct dvb_frontend* fe)
        tda1004x_write_byteI(state, TDA10046H_CVBER_CTRL, 0x1a); // 10^6 VBER measurement bits
        tda1004x_write_byteI(state, TDA1004X_CONF_TS1, 7); // MPEG2 interface config
        tda1004x_write_byteI(state, TDA1004X_CONF_TS2, 0xc0); // MPEG2 interface config
+       // tda1004x_write_mask(state, 0x50, 0x80, 0x80);         // handle out of guard echoes
        tda1004x_write_mask(state, 0x3a, 0x80, state->config->invert_oclk << 7);
 
        state->initialised = 1;
@@ -1027,6 +1039,7 @@ static int tda1004x_read_status(struct dvb_frontend* fe, fe_status_t * fe_status
                if (status == -1)
                        return -EIO;
                cber |= (status << 8);
+               // The address 0x20 should be read to cope with a TDA10046 bug
                tda1004x_read_byte(state, TDA1004X_CBER_RESET);
 
                if (cber != 65535)
@@ -1047,7 +1060,8 @@ static int tda1004x_read_status(struct dvb_frontend* fe, fe_status_t * fe_status
                status = tda1004x_read_byte(state, TDA1004X_VBER_MSB);
                if (status == -1)
                        return -EIO;
-               vber |= ((status << 16) & 0x0f);
+               vber |= (status & 0x0f) << 16;
+               // The CVBER_LUT should be read to cope with TDA10046 hardware bug
                tda1004x_read_byte(state, TDA1004X_CVBER_LUT);
 
                // if RS has passed some valid TS packets, then we must be
@@ -1161,6 +1175,7 @@ static int tda1004x_read_ber(struct dvb_frontend* fe, u32* ber)
        if (tmp < 0)
                return -EIO;
        *ber |= (tmp << 9);
+       // The address 0x20 should be read to cope with a TDA10046 bug
        tda1004x_read_byte(state, TDA1004X_CBER_RESET);
 
        dprintk("%s: ber=0x%x\n", __FUNCTION__, *ber);
@@ -1187,6 +1202,8 @@ static int tda1004x_sleep(struct dvb_frontend* fe)
                                tda1004x_disable_tuner_i2c(state);
                        }
                }
+               /* set outputs to tristate */
+               tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE1, 0xff);
                tda1004x_write_mask(state, TDA1004X_CONFC4, 1, 1);
                break;
        }
index 8659c52647adf839139a7e1ae38e95071ff800a5..cc0c4af64067037312fde708aef5dea56c9b5459 100644 (file)
@@ -35,7 +35,8 @@ enum tda10046_agc {
        TDA10046_AGC_DEFAULT,           /* original configuration */
        TDA10046_AGC_IFO_AUTO_NEG,      /* IF AGC only, automatic, negtive */
        TDA10046_AGC_IFO_AUTO_POS,      /* IF AGC only, automatic, positive */
-       TDA10046_AGC_TDA827X,       /* IF AGC only, special setup for tda827x */
+       TDA10046_AGC_TDA827X,           /* IF AGC only, special setup for tda827x */
+       TDA10046_AGC_TDA827X_GPL,       /* same as above, but GPIOs 0 */
 };
 
 enum tda10046_if {