staging: comedi: ni_65xx: convert printk() to dev_...()
authorIan Abbott <abbotti@mev.co.uk>
Fri, 14 Sep 2012 16:34:03 +0000 (17:34 +0100)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Mon, 17 Sep 2012 12:09:03 +0000 (05:09 -0700)
Convert the `printk()` calls in this drivers to use the `dev_...()`
calls instead.  Remove the initial `printk()` call in the comedi
`attach()` handler (`ni_65xx_attach()`) as it's a bit redundant - the
board type and contents of a board ID register are printed later in the
function.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/comedi/drivers/ni_65xx.c

index f4c4233417eba2cbe906d2144a1df9e74aa2ee6d..ca5e07503178e1950e998bdb27c29f383f2fa640 100644 (file)
@@ -453,11 +453,9 @@ static int ni_65xx_dio_insn_bits(struct comedi_device *dev,
                        writeb(bits,
                               private(dev)->mite->daq_io_addr +
                               Port_Data(port));
-/* printk("wrote 0x%x to port %i\n", bits, port); */
                }
                port_read_bits =
                    readb(private(dev)->mite->daq_io_addr + Port_Data(port));
-/* printk("read 0x%x from port %i\n", port_read_bits, port); */
                if (s->type == COMEDI_SUBD_DO && board(dev)->invert_outputs) {
                        /* Outputs inverted, so invert value read back from
                         * DO subdevice.  (Does not apply to boards with DIO
@@ -651,8 +649,6 @@ static int ni_65xx_attach(struct comedi_device *dev,
        unsigned i;
        int ret;
 
-       printk(KERN_INFO "comedi%d: ni_65xx:", dev->minor);
-
        ret = alloc_private(dev, sizeof(struct ni_65xx_private));
        if (ret < 0)
                return ret;
@@ -663,15 +659,13 @@ static int ni_65xx_attach(struct comedi_device *dev,
 
        ret = mite_setup(private(dev)->mite);
        if (ret < 0) {
-               printk(KERN_WARNING "error setting up mite\n");
+               dev_warn(dev->class_dev, "error setting up mite\n");
                return ret;
        }
 
        dev->board_name = board(dev)->name;
        dev->irq = mite_irq(private(dev)->mite);
-       printk(KERN_INFO " %s", dev->board_name);
-
-       printk(KERN_INFO " ID=0x%02x",
+       dev_info(dev->class_dev, "board: %s, ID=0x%02x", dev->board_name,
               readb(private(dev)->mite->daq_io_addr + ID_Register));
 
        ret = comedi_alloc_subdevices(dev, 4);
@@ -772,11 +766,9 @@ static int ni_65xx_attach(struct comedi_device *dev,
                          "ni_65xx", dev);
        if (ret < 0) {
                dev->irq = 0;
-               printk(KERN_WARNING " irq not available");
+               dev_warn(dev->class_dev, "irq not available\n");
        }
 
-       printk("\n");
-
        return 0;
 }
 
@@ -825,7 +817,7 @@ static int ni_65xx_find_device(struct comedi_device *dev, int bus, int slot)
                        }
                }
        }
-       printk(KERN_WARNING "no device found\n");
+       dev_warn(dev->class_dev, "no device found\n");
        mite_list_devices();
        return -EIO;
 }