--- /dev/null
+/*
+ * Google Veyron Mickey Rev 0 board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-veyron.dtsi"
+
+/ {
+ model = "Google Mickey";
+ compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7",
+ "google,veyron-mickey-rev6", "google,veyron-mickey-rev5",
+ "google,veyron-mickey-rev4", "google,veyron-mickey-rev3",
+ "google,veyron-mickey-rev2", "google,veyron-mickey-rev1",
+ "google,veyron-mickey-rev0", "google,veyron-mickey",
+ "google,veyron", "rockchip,rk3288";
+
+ vcc_5v: vcc-5v {
+ vin-supply = <&vcc33_sys>;
+ };
+
+ vcc33_io: vcc33_io {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc33_io";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc33_sys>;
+ };
+};
+
+&cpu_thermal {
+ /delete-node/ trips;
+ /delete-node/ cooling-maps;
+
+ trips {
+ cpu_alert_almost_warm: cpu_alert_almost_warm {
+ temperature = <63000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_alert_warm: cpu_alert_warm {
+ temperature = <65000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_alert_almost_hot: cpu_alert_almost_hot {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_alert_hot: cpu_alert_hot {
+ temperature = <82000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_alert_hotter: cpu_alert_hotter {
+ temperature = <84000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_alert_very_hot: cpu_alert_very_hot {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_crit: cpu_crit {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * After 1st level, throttle the CPU down to as low as 1.4 GHz
+ * and don't let the GPU go faster than 400 MHz. Note that we
+ * won't throttle the GPU lower than 400 MHz due to CPU
+ * heat--we'll let the GPU do the rest itself.
+ */
+ cpu_warm_limit_cpu {
+ trip = <&cpu_alert_warm>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT 4>;
+ };
+
+ /*
+ * Add some discrete steps to help throttling system deal
+ * with the fact that there are two passive cooling devices:
+ * the CPU and the GPU.
+ *
+ * - 1.2 GHz - 1.0 GHz (almost hot)
+ * - 800 MHz (hot)
+ * - 800 MHz - 696 MHz (hotter)
+ * - 696 MHz - min (very hot)
+ *
+ * Note:
+ * - 800 MHz appears to be a "sweet spot" for me. I can run
+ * some pretty serious workload here and be happy.
+ * - After 696 MHz we stop lowering voltage, so throttling
+ * past there is less effective.
+ */
+ cpu_almost_hot_limit_cpu {
+ trip = <&cpu_alert_almost_hot>;
+ cooling-device =
+ <&cpu0 5 6>;
+ };
+ cpu_hot_limit_cpu {
+ trip = <&cpu_alert_hot>;
+ cooling-device =
+ <&cpu0 7 7>;
+ };
+ cpu_hotter_limit_cpu {
+ trip = <&cpu_alert_hotter>;
+ cooling-device =
+ <&cpu0 7 8>;
+ };
+ cpu_very_hot_limit_cpu {
+ trip = <&cpu_alert_very_hot>;
+ cooling-device =
+ <&cpu0 8 THERMAL_NO_LIMIT>;
+ };
+ };
+};
+
+&emmc {
+ /delete-property/mmc-hs200-1_8v;
+};
+
+&i2c2 {
+ status = "disabled";
+};
+
+&i2c4 {
+ status = "disabled";
+};
+
+&i2s {
+ status = "okay";
+ clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out";
+ clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_OUT>;
+};
+
+&rk808 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
+ dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
+ <&gpio7 15 GPIO_ACTIVE_HIGH>;
+
+ /delete-property/ vcc6-supply;
+ /delete-property/ vcc12-supply;
+
+ vcc11-supply = <&vcc33_sys>;
+
+ regulators {
+ /* vcc33_io is sourced directly from vcc33_sys */
+ /delete-node/ LDO_REG1;
+ /delete-node/ LDO_REG7;
+
+ /* This is not a pwren anymore, but the real power supply */
+ vdd10_lcd: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd10_lcd";
+ regulator-suspend-mem-disabled;
+ };
+
+ vcc18_lcd: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_lcd";
+ regulator-suspend-mem-disabled;
+ };
+ };
+};
+
+&pinctrl {
+ hdmi {
+ power_hdmi_on: power-hdmi-on {
+ rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ dvs_1: dvs-1 {
+ rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ dvs_2: dvs-2 {
+ rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+};
+
+&usb_host0_ehci {
+ status = "disabled";
+};
+
+&usb_host1 {
+ status = "disabled";
+};
+
+&vcc50_hdmi {
+ enable-active-high;
+ gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&power_hdmi_on>;
+};
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff