power: supply: axp20x_usb_power: use of_device_id data field instead of device_is_com...
authorQuentin Schulz <quentin.schulz@free-electrons.com>
Fri, 9 Dec 2016 11:04:09 +0000 (12:04 +0100)
committerSebastian Reichel <sre@kernel.org>
Wed, 4 Jan 2017 20:59:30 +0000 (21:59 +0100)
This replaces calls to of_device_is_compatible to check data field of
of_device_id matched when probing the driver.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
drivers/power/supply/axp20x_usb_power.c

index 6af6feb7058da73f02ac7dadcca56a776925073b..8985646b982a74ed6ec79ec68e8f84d4da541add 100644 (file)
@@ -17,6 +17,7 @@
 #include <linux/mfd/axp20x.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/power_supply.h>
 #include <linux/regmap.h>
@@ -45,6 +46,7 @@ struct axp20x_usb_power {
        struct device_node *np;
        struct regmap *regmap;
        struct power_supply *supply;
+       int axp20x_id;
 };
 
 static irqreturn_t axp20x_usb_power_irq(int irq, void *devid)
@@ -86,8 +88,7 @@ static int axp20x_usb_power_get_property(struct power_supply *psy,
 
                switch (v & AXP20X_VBUS_CLIMIT_MASK) {
                case AXP20X_VBUC_CLIMIT_100mA:
-                       if (of_device_is_compatible(power->np,
-                                       "x-powers,axp202-usb-power-supply")) {
+                       if (power->axp20x_id == AXP202_ID) {
                                val->intval = 100000;
                        } else {
                                val->intval = -1; /* No 100mA limit */
@@ -130,8 +131,7 @@ static int axp20x_usb_power_get_property(struct power_supply *psy,
 
                val->intval = POWER_SUPPLY_HEALTH_GOOD;
 
-               if (of_device_is_compatible(power->np,
-                               "x-powers,axp202-usb-power-supply")) {
+               if (power->axp20x_id == AXP202_ID) {
                        ret = regmap_read(power->regmap,
                                          AXP20X_USB_OTG_STATUS, &v);
                        if (ret)
@@ -214,11 +214,12 @@ static int axp20x_usb_power_probe(struct platform_device *pdev)
        if (!power)
                return -ENOMEM;
 
+       power->axp20x_id = (int)of_device_get_match_data(&pdev->dev);
+
        power->np = pdev->dev.of_node;
        power->regmap = axp20x->regmap;
 
-       if (of_device_is_compatible(power->np,
-                       "x-powers,axp202-usb-power-supply")) {
+       if (power->axp20x_id == AXP202_ID) {
                /* Enable vbus valid checking */
                ret = regmap_update_bits(power->regmap, AXP20X_VBUS_MON,
                                         AXP20X_VBUS_MON_VBUS_VALID,
@@ -235,8 +236,7 @@ static int axp20x_usb_power_probe(struct platform_device *pdev)
 
                usb_power_desc = &axp20x_usb_power_desc;
                irq_names = axp20x_irq_names;
-       } else if (of_device_is_compatible(power->np,
-                       "x-powers,axp221-usb-power-supply")) {
+       } else if (power->axp20x_id == AXP221_ID) {
                usb_power_desc = &axp22x_usb_power_desc;
                irq_names = axp22x_irq_names;
        } else {
@@ -273,9 +273,13 @@ static int axp20x_usb_power_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id axp20x_usb_power_match[] = {
-       { .compatible = "x-powers,axp202-usb-power-supply" },
-       { .compatible = "x-powers,axp221-usb-power-supply" },
-       { }
+       {
+               .compatible = "x-powers,axp202-usb-power-supply",
+               .data = (void *)AXP202_ID,
+       }, {
+               .compatible = "x-powers,axp221-usb-power-supply",
+               .data = (void *)AXP221_ID,
+       }, { /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, axp20x_usb_power_match);