ASoC: fsl_ssi: Add dual fifo mode support

By enabling dual fifo mode, it would allow SSI enter a better performance
to transimit/receive data without occasional hardware underrun/overrun.

Signed-off-by: Nicolin Chen <b42378@freescale.com>
Acked-by: Timur Tabi <timur@tabi.org>
Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 35e277379b86ce80d56737e3e0c05a5b3772fb2c..f43be6d4c549876b0d8c5f18307b46b4c86deb2a 100644 (file)
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -143,6 +143,7 @@ struct fsl_ssi_private {
        bool ssi_on_imx;
        bool imx_ac97;
        bool use_dma;
+       bool use_dual_fifo;
        struct clk *clk;
        struct snd_dmaengine_dai_dma_data dma_params_tx;
        struct snd_dmaengine_dai_dma_data dma_params_rx;
@@ -413,6 +414,12 @@ static int fsl_ssi_setup(struct fsl_ssi_private *ssi_private)
                write_ssi(CCSR_SSI_SOR_WAIT(3), &ssi->sor);
        }
 
+       if (ssi_private->use_dual_fifo) {
+               write_ssi_mask(&ssi->srcr, 0, CCSR_SSI_SRCR_RFEN1);
+               write_ssi_mask(&ssi->stcr, 0, CCSR_SSI_STCR_TFEN1);
+               write_ssi_mask(&ssi->scr, 0, CCSR_SSI_SCR_TCH_EN);
+       }
+
        return 0;
 }
 
@@ -480,6 +487,15 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream,
                ssi_private->second_stream = substream;
        }
 
+       /* When using dual fifo mode, it is safer to ensure an even period
+        * size. If appearing to an odd number while DMA always starts its
+        * task from fifo0, fifo1 would be neglected at the end of each
+        * period. But SSI would still access fifo1 with an invalid data.
+        */
+       if (ssi_private->use_dual_fifo)
+               snd_pcm_hw_constraint_step(substream->runtime, 0,
+                               SNDRV_PCM_HW_PARAM_PERIOD_SIZE, 2);
+
        return 0;
 }
 
@@ -947,7 +963,7 @@ static int fsl_ssi_probe(struct platform_device *pdev)
                ssi_private->fifo_depth = 8;
 
        if (of_device_is_compatible(pdev->dev.of_node, "fsl,imx21-ssi")) {
-               u32 dma_events[2];
+               u32 dma_events[2], dmas[4];
                ssi_private->ssi_on_imx = true;
 
                ssi_private->clk = devm_clk_get(&pdev->dev, NULL);
@@ -1001,6 +1017,15 @@ static int fsl_ssi_probe(struct platform_device *pdev)
                        dma_events[0], shared ? IMX_DMATYPE_SSI_SP : IMX_DMATYPE_SSI);
                imx_pcm_dma_params_init_data(&ssi_private->filter_data_rx,
                        dma_events[1], shared ? IMX_DMATYPE_SSI_SP : IMX_DMATYPE_SSI);
+               if (!of_property_read_u32_array(pdev->dev.of_node, "dmas", dmas, 4)
+                               && dmas[2] == IMX_DMATYPE_SSI_DUAL) {
+                       ssi_private->use_dual_fifo = true;
+                       /* When using dual fifo mode, we need to keep watermark
+                        * as even numbers due to dma script limitation.
+                        */
+                       ssi_private->dma_params_tx.maxburst &= ~0x1;
+                       ssi_private->dma_params_rx.maxburst &= ~0x1;
+               }
        } else if (ssi_private->use_dma) {
                /* The 'name' should not have any slashes in it. */
                ret = devm_request_irq(&pdev->dev, ssi_private->irq,