IEEE80211_HW_MFP_CAPABLE |
IEEE80211_HW_REPORTS_TX_ACK_STATUS |
IEEE80211_HW_HAS_RATE_CONTROL |
- IEEE80211_HW_SUPPORTS_STATIC_SMPS |
IEEE80211_HW_AP_LINK_PS |
IEEE80211_HW_SPECTRUM_MGMT;
* bytes is used for padding/alignment if necessary. */
ar->hw->extra_tx_headroom += sizeof(struct htt_data_tx_desc_frag)*2 + 4;
+ ar->hw->wiphy->features |= NL80211_FEATURE_STATIC_SMPS;
+
if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS)
- ar->hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS;
+ ar->hw->wiphy->features |= NL80211_FEATURE_DYNAMIC_SMPS;
if (ar->ht_cap_info & WMI_HT_CAP_ENABLED) {
ar->hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION;
IEEE80211_HW_REPORTS_TX_ACK_STATUS | IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
if (il->cfg->sku & IL_SKU_N)
- hw->flags |=
- IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS |
- IEEE80211_HW_SUPPORTS_STATIC_SMPS;
+ hw->wiphy->features |= NL80211_FEATURE_DYNAMIC_SMPS |
+ NL80211_FEATURE_STATIC_SMPS;
hw->sta_data_size = sizeof(struct il_station_priv);
hw->vif_data_size = sizeof(struct il_vif_priv);
*/
if (priv->nvm_data->sku_cap_11n_enable)
- hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS |
- IEEE80211_HW_SUPPORTS_STATIC_SMPS;
+ hw->wiphy->features |= NL80211_FEATURE_DYNAMIC_SMPS |
+ NL80211_FEATURE_STATIC_SMPS;
/*
* Enable 11w if advertised by firmware and software crypto
IEEE80211_HW_AMPDU_AGGREGATION |
IEEE80211_HW_TIMING_BEACON_ONLY |
IEEE80211_HW_CONNECTION_MONITOR |
- IEEE80211_HW_CHANCTX_STA_CSA |
- IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS |
- IEEE80211_HW_SUPPORTS_STATIC_SMPS;
+ IEEE80211_HW_CHANCTX_STA_CSA;
hw->queues = mvm->first_agg_queue;
hw->offchannel_tx_hw_queue = IWL_MVM_OFFCHANNEL_QUEUE;
hw->wiphy->features |= NL80211_FEATURE_P2P_GO_CTWIN |
NL80211_FEATURE_LOW_PRIORITY_SCAN |
- NL80211_FEATURE_P2P_GO_OPPPS;
+ NL80211_FEATURE_P2P_GO_OPPPS |
+ NL80211_FEATURE_DYNAMIC_SMPS |
+ NL80211_FEATURE_STATIC_SMPS;
mvm->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
hw->flags = IEEE80211_HW_MFP_CAPABLE |
IEEE80211_HW_SIGNAL_DBM |
- IEEE80211_HW_SUPPORTS_STATIC_SMPS |
- IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS |
IEEE80211_HW_AMPDU_AGGREGATION |
IEEE80211_HW_WANT_MONITOR_VIF |
IEEE80211_HW_QUEUE_CONTROL |
WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL |
WIPHY_FLAG_AP_UAPSD |
WIPHY_FLAG_HAS_CHANNEL_SWITCH;
- hw->wiphy->features |= NL80211_FEATURE_ACTIVE_MONITOR;
- hw->wiphy->features |= NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE;
+ hw->wiphy->features |= NL80211_FEATURE_ACTIVE_MONITOR |
+ NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE |
+ NL80211_FEATURE_STATIC_SMPS |
+ NL80211_FEATURE_DYNAMIC_SMPS;
/* ask mac80211 to reserve space for magic */
hw->vif_data_size = sizeof(struct hwsim_vif_priv);
* @IEEE80211_HW_MFP_CAPABLE:
* Hardware supports management frame protection (MFP, IEEE 802.11w).
*
- * @IEEE80211_HW_SUPPORTS_STATIC_SMPS:
- * Hardware supports static spatial multiplexing powersave,
- * ie. can turn off all but one chain even on HT connections
- * that should be using more chains.
- *
- * @IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS:
- * Hardware supports dynamic spatial multiplexing powersave,
- * ie. can turn off all but one chain and then wake the rest
- * up as required after, for example, rts/cts handshake.
- *
* @IEEE80211_HW_SUPPORTS_UAPSD:
* Hardware supports Unscheduled Automatic Power Save Delivery
* (U-APSD) in managed mode. The mode is configured with
IEEE80211_HW_SUPPORTS_DYNAMIC_PS = 1<<12,
IEEE80211_HW_MFP_CAPABLE = 1<<13,
IEEE80211_HW_WANT_MONITOR_VIF = 1<<14,
- IEEE80211_HW_SUPPORTS_STATIC_SMPS = 1<<15,
- IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS = 1<<16,
+ /* free slots */
IEEE80211_HW_SUPPORTS_UAPSD = 1<<17,
IEEE80211_HW_REPORTS_TX_ACK_STATUS = 1<<18,
IEEE80211_HW_CONNECTION_MONITOR = 1<<19,
sf += scnprintf(buf + sf, mxln - sf, "SUPPORTS_DYNAMIC_PS\n");
if (local->hw.flags & IEEE80211_HW_MFP_CAPABLE)
sf += scnprintf(buf + sf, mxln - sf, "MFP_CAPABLE\n");
- if (local->hw.flags & IEEE80211_HW_SUPPORTS_STATIC_SMPS)
- sf += scnprintf(buf + sf, mxln - sf, "SUPPORTS_STATIC_SMPS\n");
- if (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS)
- sf += scnprintf(buf + sf, mxln - sf,
- "SUPPORTS_DYNAMIC_SMPS\n");
if (local->hw.flags & IEEE80211_HW_SUPPORTS_UAPSD)
sf += scnprintf(buf + sf, mxln - sf, "SUPPORTS_UAPSD\n");
if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
struct ieee80211_local *local = sdata->local;
int err;
- if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_STATIC_SMPS) &&
+ if (!(local->hw.wiphy->features & NL80211_FEATURE_STATIC_SMPS) &&
smps_mode == IEEE80211_SMPS_STATIC)
return -EINVAL;
/* auto should be dynamic if in PS mode */
- if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS) &&
+ if (!(local->hw.wiphy->features & NL80211_FEATURE_DYNAMIC_SMPS) &&
(smps_mode == IEEE80211_SMPS_DYNAMIC ||
smps_mode == IEEE80211_SMPS_AUTOMATIC))
return -EINVAL;
ifmgd->uapsd_max_sp_len = sdata->local->hw.uapsd_max_sp_len;
ifmgd->p2p_noa_index = -1;
- if (sdata->local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS)
+ if (sdata->local->hw.wiphy->features & NL80211_FEATURE_DYNAMIC_SMPS)
ifmgd->req_smps = IEEE80211_SMPS_AUTOMATIC;
else
ifmgd->req_smps = IEEE80211_SMPS_OFF;