net: dsa: mv88e6131: Use common initialization functions
authorGuenter Roeck <linux@roeck-us.net>
Thu, 2 Apr 2015 02:06:29 +0000 (04:06 +0200)
committerDavid S. Miller <davem@davemloft.net>
Thu, 2 Apr 2015 02:55:40 +0000 (22:55 -0400)
Common initialization functions will be needed to enable
HW bridging support.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/dsa/mv88e6131.c

index 2540ef0142afd68f5dfb489850bbd9ad64f3fdc2..0252d51c0a749bbf1dd552a5a991d5eb502b9ae0 100644 (file)
@@ -208,28 +208,6 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
                val |= 0x0100;
        REG_WRITE(addr, 0x04, val);
 
-       /* Port Control 1: disable trunking.  Also, if this is the
-        * CPU port, enable learn messages to be sent to this port.
-        */
-       REG_WRITE(addr, 0x05, dsa_is_cpu_port(ds, p) ? 0x8000 : 0x0000);
-
-       /* Port based VLAN map: give each port its own address
-        * database, allow the CPU port to talk to each of the 'real'
-        * ports, and allow each of the 'real' ports to only talk to
-        * the upstream port.
-        */
-       val = (p & 0xf) << 12;
-       if (dsa_is_cpu_port(ds, p))
-               val |= ds->phys_port_mask;
-       else
-               val |= 1 << dsa_upstream_port(ds);
-       REG_WRITE(addr, 0x06, val);
-
-       /* Default VLAN ID and priority: don't set a default VLAN
-        * ID, and set the default packet priority to zero.
-        */
-       REG_WRITE(addr, 0x07, 0x0000);
-
        /* Port Control 2: don't force a good FCS, don't use
         * VLAN-based, source address-based or destination
         * address-based priority overrides, don't let the switch
@@ -278,20 +256,19 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
         */
        REG_WRITE(addr, 0x19, 0x7654);
 
-       return 0;
+       return mv88e6xxx_setup_port_common(ds, p);
 }
 
 static int mv88e6131_setup(struct dsa_switch *ds)
 {
-       struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
        int i;
        int ret;
 
-       mutex_init(&ps->smi_mutex);
-       mv88e6xxx_ppu_state_init(ds);
-       mutex_init(&ps->stats_mutex);
+       ret = mv88e6xxx_setup_common(ds);
+       if (ret < 0)
+               return ret;
 
-       ps->id = REG_READ(REG_PORT(0), 0x03) & 0xfff0;
+       mv88e6xxx_ppu_state_init(ds);
 
        ret = mv88e6131_switch_reset(ds);
        if (ret < 0)