remove dead code in via-pmu68k
authorJohannes Berg <johannes@sipsolutions.net>
Wed, 22 Aug 2007 21:01:31 +0000 (14:01 -0700)
committerLinus Torvalds <torvalds@woody.linux-foundation.org>
Thu, 23 Aug 2007 02:52:45 +0000 (19:52 -0700)
When suspend is ever implemented for pmu68k it really should follow the
generic pm_ops concept and not mirror the platform-specific /dev/pmu
device with ioctls on it. Hence, this patch removes the unused code there;
should the implementers need it they can look at via-pmu.c and/or the
history of the file.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/macintosh/via-pmu68k.c

index dfdf11c1eec45f127cf2849a789862b85ece1797..e2f84da09e7cf77661ae2b34db819e9e604be49c 100644 (file)
@@ -818,243 +818,3 @@ pmu_present(void)
 {
        return (pmu_kind != PMU_UNKNOWN);
 }
-
-#if 0 /* needs some work for 68K */
-
-/*
- * This struct is used to store config register values for
- * PCI devices which may get powered off when we sleep.
- */
-static struct pci_save {
-       u16     command;
-       u16     cache_lat;
-       u16     intr;
-} *pbook_pci_saves;
-static int n_pbook_pci_saves;
-
-static inline void
-pbook_pci_save(void)
-{
-       int npci;
-       struct pci_dev *pd = NULL;
-       struct pci_save *ps;
-
-       npci = 0;
-       while ((pd = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL)
-               ++npci;
-       n_pbook_pci_saves = npci;
-       if (npci == 0)
-               return;
-       ps = kmalloc(npci * sizeof(*ps), GFP_KERNEL);
-       pbook_pci_saves = ps;
-       if (ps == NULL)
-               return;
-
-       pd = NULL;
-       while ((pd = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL) {
-               pci_read_config_word(pd, PCI_COMMAND, &ps->command);
-               pci_read_config_word(pd, PCI_CACHE_LINE_SIZE, &ps->cache_lat);
-               pci_read_config_word(pd, PCI_INTERRUPT_LINE, &ps->intr);
-               ++ps;
-               --npci;
-       }
-}
-
-static inline void
-pbook_pci_restore(void)
-{
-       u16 cmd;
-       struct pci_save *ps = pbook_pci_saves;
-       struct pci_dev *pd = NULL;
-       int j;
-
-       while ((pd = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL) {
-               if (ps->command == 0)
-                       continue;
-               pci_read_config_word(pd, PCI_COMMAND, &cmd);
-               if ((ps->command & ~cmd) == 0)
-                       continue;
-               switch (pd->hdr_type) {
-               case PCI_HEADER_TYPE_NORMAL:
-                       for (j = 0; j < 6; ++j)
-                               pci_write_config_dword(pd,
-                                       PCI_BASE_ADDRESS_0 + j*4,
-                                       pd->resource[j].start);
-                       pci_write_config_dword(pd, PCI_ROM_ADDRESS,
-                              pd->resource[PCI_ROM_RESOURCE].start);
-                       pci_write_config_word(pd, PCI_CACHE_LINE_SIZE,
-                               ps->cache_lat);
-                       pci_write_config_word(pd, PCI_INTERRUPT_LINE,
-                               ps->intr);
-                       pci_write_config_word(pd, PCI_COMMAND, ps->command);
-                       break;
-                       /* other header types not restored at present */
-               }
-       }
-}
-
-/*
- * Put the powerbook to sleep.
- */
-#define IRQ_ENABLE     ((unsigned int *)0xf3000024)
-#define MEM_CTRL       ((unsigned int *)0xf8000070)
-
-int powerbook_sleep(void)
-{
-       int ret, i, x;
-       static int save_backlight;
-       static unsigned int save_irqen;
-       unsigned long msr;
-       unsigned int hid0;
-       unsigned long p, wait;
-       struct adb_request sleep_req;
-
-       /* Notify device drivers */
-       ret = blocking_notifier_call_chain(&sleep_notifier_list,
-                       PBOOK_SLEEP, NULL);
-       if (ret & NOTIFY_STOP_MASK)
-               return -EBUSY;
-
-       /* Sync the disks. */
-       /* XXX It would be nice to have some way to ensure that
-        * nobody is dirtying any new buffers while we wait. */
-       sys_sync();
-
-       /* Turn off the display backlight */
-       save_backlight = backlight_enabled;
-       if (save_backlight)
-               pmu_enable_backlight(0);
-
-       /* Give the disks a little time to actually finish writing */
-       for (wait = jiffies + (HZ/4); time_before(jiffies, wait); )
-               mb();
-
-       /* Disable all interrupts except pmu */
-       save_irqen = in_le32(IRQ_ENABLE);
-       for (i = 0; i < 32; ++i)
-               if (i != vias->intrs[0].line && (save_irqen & (1 << i)))
-                       disable_irq(i);
-       asm volatile("mtdec %0" : : "r" (0x7fffffff));
-
-       /* Save the state of PCI config space for some slots */
-       pbook_pci_save();
-
-       /* Set the memory controller to keep the memory refreshed
-          while we're asleep */
-       for (i = 0x403f; i >= 0x4000; --i) {
-               out_be32(MEM_CTRL, i);
-               do {
-                       x = (in_be32(MEM_CTRL) >> 16) & 0x3ff;
-               } while (x == 0);
-               if (x >= 0x100)
-                       break;
-       }
-
-       /* Ask the PMU to put us to sleep */
-       pmu_request(&sleep_req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T');
-       while (!sleep_req.complete)
-               mb();
-       /* displacement-flush the L2 cache - necessary? */
-       for (p = KERNELBASE; p < KERNELBASE + 0x100000; p += 0x1000)
-               i = *(volatile int *)p;
-       asleep = 1;
-
-       /* Put the CPU into sleep mode */
-       asm volatile("mfspr %0,1008" : "=r" (hid0) :);
-       hid0 = (hid0 & ~(HID0_NAP | HID0_DOZE)) | HID0_SLEEP;
-       asm volatile("mtspr 1008,%0" : : "r" (hid0));
-       local_save_flags(msr);
-       msr |= MSR_POW | MSR_EE;
-       local_irq_restore(msr);
-       udelay(10);
-
-       /* OK, we're awake again, start restoring things */
-       out_be32(MEM_CTRL, 0x3f);
-       pbook_pci_restore();
-
-       /* wait for the PMU interrupt sequence to complete */
-       while (asleep)
-               mb();
-
-       /* reenable interrupts */
-       for (i = 0; i < 32; ++i)
-               if (i != vias->intrs[0].line && (save_irqen & (1 << i)))
-                       enable_irq(i);
-
-       /* Notify drivers */
-       blocking_notifier_call_chain(&sleep_notifier_list, PBOOK_WAKE, NULL);
-
-       /* reenable ADB autopoll */
-       pmu_adb_autopoll(adb_dev_map);
-
-       /* Turn on the screen backlight, if it was on before */
-       if (save_backlight)
-               pmu_enable_backlight(1);
-
-       /* Wait for the hard disk to spin up */
-
-       return 0;
-}
-
-/*
- * Support for /dev/pmu device
- */
-static int pmu_open(struct inode *inode, struct file *file)
-{
-       return 0;
-}
-
-static ssize_t pmu_read(struct file *file, char *buf,
-                       size_t count, loff_t *ppos)
-{
-       return 0;
-}
-
-static ssize_t pmu_write(struct file *file, const char *buf,
-                        size_t count, loff_t *ppos)
-{
-       return 0;
-}
-
-static int pmu_ioctl(struct inode * inode, struct file *filp,
-                    u_int cmd, u_long arg)
-{
-       int error;
-       __u32 value;
-
-       switch (cmd) {
-           case PMU_IOC_SLEEP:
-               return -ENOSYS;
-           case PMU_IOC_GET_BACKLIGHT:
-               return put_user(backlight_level, (__u32 *)arg);
-           case PMU_IOC_SET_BACKLIGHT:
-               error = get_user(value, (__u32 *)arg);
-               if (!error)
-                       pmu_set_brightness(value);
-               return error;
-           case PMU_IOC_GET_MODEL:
-               return put_user(pmu_kind, (__u32 *)arg);
-       }
-       return -EINVAL;
-}
-
-static const struct file_operations pmu_device_fops = {
-       .read           = pmu_read,
-       .write          = pmu_write,
-       .ioctl          = pmu_ioctl,
-       .open           = pmu_open,
-};
-
-static struct miscdevice pmu_device = {
-       PMU_MINOR, "pmu", &pmu_device_fops
-};
-
-void pmu_device_init(void)
-{
-       if (!via)
-               return;
-       if (misc_register(&pmu_device) < 0)
-               printk(KERN_ERR "via-pmu68k: cannot register misc device.\n");
-}
-#endif /* CONFIG_PMAC_PBOOK */
-