MIPS: Octeon: Delete legacy code for PHY access

PHY access through the board helper is impossible with the
current drivers, so delete this code.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14205/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
index 5572e398180b07aab9a69ab6148ab4d2a35435bb..bc37266da6fd3d34afb41258e26de7c671e8d0ea 100644 (file)
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
@@ -211,8 +211,6 @@ int cvmx_helper_board_get_mii_address(int ipd_port)
 cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port)
 {
        cvmx_helper_link_info_t result;
-       int phy_addr;
-       int is_broadcom_phy = 0;
 
        /* Unless we fix it later, all links are defaulted to down */
        result.u64 = 0;
@@ -248,8 +246,7 @@ cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port)
                        result.s.full_duplex = 1;
                        result.s.speed = 1000;
                        return result;
-               } else          /* The other port uses a broadcom PHY */
-                       is_broadcom_phy = 1;
+               }
                break;
        case CVMX_BOARD_TYPE_BBGW_REF:
                /* Port 1 on these boards is always Gigabit */
@@ -267,108 +264,7 @@ cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port)
                break;
        }
 
-       phy_addr = cvmx_helper_board_get_mii_address(ipd_port);
-       if (phy_addr != -1) {
-               if (is_broadcom_phy) {
-                       /*
-                        * Below we are going to read SMI/MDIO
-                        * register 0x19 which works on Broadcom
-                        * parts
-                        */
-                       int phy_status =
-                           cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
-                                          0x19);
-                       switch ((phy_status >> 8) & 0x7) {
-                       case 0:
-                               result.u64 = 0;
-                               break;
-                       case 1:
-                               result.s.link_up = 1;
-                               result.s.full_duplex = 0;
-                               result.s.speed = 10;
-                               break;
-                       case 2:
-                               result.s.link_up = 1;
-                               result.s.full_duplex = 1;
-                               result.s.speed = 10;
-                               break;
-                       case 3:
-                               result.s.link_up = 1;
-                               result.s.full_duplex = 0;
-                               result.s.speed = 100;
-                               break;
-                       case 4:
-                               result.s.link_up = 1;
-                               result.s.full_duplex = 1;
-                               result.s.speed = 100;
-                               break;
-                       case 5:
-                               result.s.link_up = 1;
-                               result.s.full_duplex = 1;
-                               result.s.speed = 100;
-                               break;
-                       case 6:
-                               result.s.link_up = 1;
-                               result.s.full_duplex = 0;
-                               result.s.speed = 1000;
-                               break;
-                       case 7:
-                               result.s.link_up = 1;
-                               result.s.full_duplex = 1;
-                               result.s.speed = 1000;
-                               break;
-                       }
-               } else {
-                       /*
-                        * This code assumes we are using a Marvell
-                        * Gigabit PHY. All the speed information can
-                        * be read from register 17 in one
-                        * go. Somebody using a different PHY will
-                        * need to handle it above in the board
-                        * specific area.
-                        */
-                       int phy_status =
-                           cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 17);
-
-                       /*
-                        * If the resolve bit 11 isn't set, see if
-                        * autoneg is turned off (bit 12, reg 0). The
-                        * resolve bit doesn't get set properly when
-                        * autoneg is off, so force it.
-                        */
-                       if ((phy_status & (1 << 11)) == 0) {
-                               int auto_status =
-                                   cvmx_mdio_read(phy_addr >> 8,
-                                                  phy_addr & 0xff, 0);
-                               if ((auto_status & (1 << 12)) == 0)
-                                       phy_status |= 1 << 11;
-                       }
-
-                       /*
-                        * Only return a link if the PHY has finished
-                        * auto negotiation and set the resolved bit
-                        * (bit 11)
-                        */
-                       if (phy_status & (1 << 11)) {
-                               result.s.link_up = 1;
-                               result.s.full_duplex = ((phy_status >> 13) & 1);
-                               switch ((phy_status >> 14) & 3) {
-                               case 0: /* 10 Mbps */
-                                       result.s.speed = 10;
-                                       break;
-                               case 1: /* 100 Mbps */
-                                       result.s.speed = 100;
-                                       break;
-                               case 2: /* 1 Gbps */
-                                       result.s.speed = 1000;
-                                       break;
-                               case 3: /* Illegal */
-                                       result.u64 = 0;
-                                       break;
-                               }
-                       }
-               }
-       } else if (OCTEON_IS_MODEL(OCTEON_CN3XXX)
+       if (OCTEON_IS_MODEL(OCTEON_CN3XXX)
                   || OCTEON_IS_MODEL(OCTEON_CN58XX)
                   || OCTEON_IS_MODEL(OCTEON_CN50XX)) {
                /*