Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker
<mdsxyz123@yahoo.com>
Copyright (C) 2007, 2008 Jean Delvare <khali@linux-fr.org>
+ Copyright (C) 2010 Intel Corporation,
+ David Woodhouse <dwmw2@infradead.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
See the file Documentation/i2c/busses/i2c-i801 for details.
*/
-/* Note: we assume there can only be one I801, with one SMBus interface */
-
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/dmi.h>
/* I801 SMBus address offsets */
-#define SMBHSTSTS (0 + i801_smba)
-#define SMBHSTCNT (2 + i801_smba)
-#define SMBHSTCMD (3 + i801_smba)
-#define SMBHSTADD (4 + i801_smba)
-#define SMBHSTDAT0 (5 + i801_smba)
-#define SMBHSTDAT1 (6 + i801_smba)
-#define SMBBLKDAT (7 + i801_smba)
-#define SMBPEC (8 + i801_smba) /* ICH3 and later */
-#define SMBAUXSTS (12 + i801_smba) /* ICH4 and later */
-#define SMBAUXCTL (13 + i801_smba) /* ICH4 and later */
+#define SMBHSTSTS(p) (0 + (p)->smba)
+#define SMBHSTCNT(p) (2 + (p)->smba)
+#define SMBHSTCMD(p) (3 + (p)->smba)
+#define SMBHSTADD(p) (4 + (p)->smba)
+#define SMBHSTDAT0(p) (5 + (p)->smba)
+#define SMBHSTDAT1(p) (6 + (p)->smba)
+#define SMBBLKDAT(p) (7 + (p)->smba)
+#define SMBPEC(p) (8 + (p)->smba) /* ICH3 and later */
+#define SMBAUXSTS(p) (12 + (p)->smba) /* ICH4 and later */
+#define SMBAUXCTL(p) (13 + (p)->smba) /* ICH4 and later */
/* PCI Address Constants */
#define SMBBAR 4
SMBHSTSTS_BUS_ERR | SMBHSTSTS_DEV_ERR | \
SMBHSTSTS_INTR)
-static unsigned long i801_smba;
-static unsigned char i801_original_hstcfg;
+struct i801_priv {
+ struct i2c_adapter adapter;
+ unsigned long smba;
+ unsigned char original_hstcfg;
+ struct pci_dev *pci_dev;
+ unsigned int features;
+};
+
static struct pci_driver i801_driver;
-static struct pci_dev *I801_dev;
#define FEATURE_SMBUS_PEC (1 << 0)
#define FEATURE_BLOCK_BUFFER (1 << 1)
#define FEATURE_BLOCK_PROC (1 << 2)
#define FEATURE_I2C_BLOCK_READ (1 << 3)
-static unsigned int i801_features;
static const char *i801_feature_names[] = {
"SMBus PEC",
/* Make sure the SMBus host is ready to start transmitting.
Return 0 if it is, -EBUSY if it is not. */
-static int i801_check_pre(void)
+static int i801_check_pre(struct i801_priv *priv)
{
int status;
- status = inb_p(SMBHSTSTS);
+ status = inb_p(SMBHSTSTS(priv));
if (status & SMBHSTSTS_HOST_BUSY) {
- dev_err(&I801_dev->dev, "SMBus is busy, can't use it!\n");
+ dev_err(&priv->pci_dev->dev, "SMBus is busy, can't use it!\n");
return -EBUSY;
}
status &= STATUS_FLAGS;
if (status) {
- dev_dbg(&I801_dev->dev, "Clearing status flags (%02x)\n",
+ dev_dbg(&priv->pci_dev->dev, "Clearing status flags (%02x)\n",
status);
- outb_p(status, SMBHSTSTS);
- status = inb_p(SMBHSTSTS) & STATUS_FLAGS;
+ outb_p(status, SMBHSTSTS(priv));
+ status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS;
if (status) {
- dev_err(&I801_dev->dev,
+ dev_err(&priv->pci_dev->dev,
"Failed clearing status flags (%02x)\n",
status);
return -EBUSY;
}
/* Convert the status register to an error code, and clear it. */
-static int i801_check_post(int status, int timeout)
+static int i801_check_post(struct i801_priv *priv, int status, int timeout)
{
int result = 0;
/* If the SMBus is still busy, we give up */
if (timeout) {
- dev_err(&I801_dev->dev, "Transaction timeout\n");
+ dev_err(&priv->pci_dev->dev, "Transaction timeout\n");
/* try to stop the current command */
- dev_dbg(&I801_dev->dev, "Terminating the current operation\n");
- outb_p(inb_p(SMBHSTCNT) | SMBHSTCNT_KILL, SMBHSTCNT);
+ dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n");
+ outb_p(inb_p(SMBHSTCNT(priv)) | SMBHSTCNT_KILL,
+ SMBHSTCNT(priv));
msleep(1);
- outb_p(inb_p(SMBHSTCNT) & (~SMBHSTCNT_KILL), SMBHSTCNT);
+ outb_p(inb_p(SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL),
+ SMBHSTCNT(priv));
/* Check if it worked */
- status = inb_p(SMBHSTSTS);
+ status = inb_p(SMBHSTSTS(priv));
if ((status & SMBHSTSTS_HOST_BUSY) ||
!(status & SMBHSTSTS_FAILED))
- dev_err(&I801_dev->dev,
+ dev_err(&priv->pci_dev->dev,
"Failed terminating the transaction\n");
- outb_p(STATUS_FLAGS, SMBHSTSTS);
+ outb_p(STATUS_FLAGS, SMBHSTSTS(priv));
return -ETIMEDOUT;
}
if (status & SMBHSTSTS_FAILED) {
result = -EIO;
- dev_err(&I801_dev->dev, "Transaction failed\n");
+ dev_err(&priv->pci_dev->dev, "Transaction failed\n");
}
if (status & SMBHSTSTS_DEV_ERR) {
result = -ENXIO;
- dev_dbg(&I801_dev->dev, "No response\n");
+ dev_dbg(&priv->pci_dev->dev, "No response\n");
}
if (status & SMBHSTSTS_BUS_ERR) {
result = -EAGAIN;
- dev_dbg(&I801_dev->dev, "Lost arbitration\n");
+ dev_dbg(&priv->pci_dev->dev, "Lost arbitration\n");
}
if (result) {
/* Clear error flags */
- outb_p(status & STATUS_FLAGS, SMBHSTSTS);
- status = inb_p(SMBHSTSTS) & STATUS_FLAGS;
+ outb_p(status & STATUS_FLAGS, SMBHSTSTS(priv));
+ status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS;
if (status) {
- dev_warn(&I801_dev->dev, "Failed clearing status "
+ dev_warn(&priv->pci_dev->dev, "Failed clearing status "
"flags at end of transaction (%02x)\n",
status);
}
return result;
}
-static int i801_transaction(int xact)
+static int i801_transaction(struct i801_priv *priv, int xact)
{
int status;
int result;
int timeout = 0;
- result = i801_check_pre();
+ result = i801_check_pre(priv);
if (result < 0)
return result;
/* the current contents of SMBHSTCNT can be overwritten, since PEC,
* INTREN, SMBSCMD are passed in xact */
- outb_p(xact | I801_START, SMBHSTCNT);
+ outb_p(xact | I801_START, SMBHSTCNT(priv));
/* We will always wait for a fraction of a second! */
do {
msleep(1);
- status = inb_p(SMBHSTSTS);
+ status = inb_p(SMBHSTSTS(priv));
} while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT));
- result = i801_check_post(status, timeout > MAX_TIMEOUT);
+ result = i801_check_post(priv, status, timeout > MAX_TIMEOUT);
if (result < 0)
return result;
- outb_p(SMBHSTSTS_INTR, SMBHSTSTS);
+ outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
return 0;
}
/* wait for INTR bit as advised by Intel */
-static void i801_wait_hwpec(void)
+static void i801_wait_hwpec(struct i801_priv *priv)
{
int timeout = 0;
int status;
do {
msleep(1);
- status = inb_p(SMBHSTSTS);
+ status = inb_p(SMBHSTSTS(priv));
} while ((!(status & SMBHSTSTS_INTR))
&& (timeout++ < MAX_TIMEOUT));
if (timeout > MAX_TIMEOUT)
- dev_dbg(&I801_dev->dev, "PEC Timeout!\n");
+ dev_dbg(&priv->pci_dev->dev, "PEC Timeout!\n");
- outb_p(status, SMBHSTSTS);
+ outb_p(status, SMBHSTSTS(priv));
}
-static int i801_block_transaction_by_block(union i2c_smbus_data *data,
+static int i801_block_transaction_by_block(struct i801_priv *priv,
+ union i2c_smbus_data *data,
char read_write, int hwpec)
{
int i, len;
int status;
- inb_p(SMBHSTCNT); /* reset the data buffer index */
+ inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */
/* Use 32-byte buffer to process this transaction */
if (read_write == I2C_SMBUS_WRITE) {
len = data->block[0];
- outb_p(len, SMBHSTDAT0);
+ outb_p(len, SMBHSTDAT0(priv));
for (i = 0; i < len; i++)
- outb_p(data->block[i+1], SMBBLKDAT);
+ outb_p(data->block[i+1], SMBBLKDAT(priv));
}
- status = i801_transaction(I801_BLOCK_DATA | ENABLE_INT9 |
+ status = i801_transaction(priv, I801_BLOCK_DATA | ENABLE_INT9 |
I801_PEC_EN * hwpec);
if (status)
return status;
if (read_write == I2C_SMBUS_READ) {
- len = inb_p(SMBHSTDAT0);
+ len = inb_p(SMBHSTDAT0(priv));
if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
return -EPROTO;
data->block[0] = len;
for (i = 0; i < len; i++)
- data->block[i + 1] = inb_p(SMBBLKDAT);
+ data->block[i + 1] = inb_p(SMBBLKDAT(priv));
}
return 0;
}
-static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data,
+static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
+ union i2c_smbus_data *data,
char read_write, int command,
int hwpec)
{
int result;
int timeout;
- result = i801_check_pre();
+ result = i801_check_pre(priv);
if (result < 0)
return result;
len = data->block[0];
if (read_write == I2C_SMBUS_WRITE) {
- outb_p(len, SMBHSTDAT0);
- outb_p(data->block[1], SMBBLKDAT);
+ outb_p(len, SMBHSTDAT0(priv));
+ outb_p(data->block[1], SMBBLKDAT(priv));
}
for (i = 1; i <= len; i++) {
else
smbcmd = I801_BLOCK_DATA;
}
- outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT);
+ outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT(priv));
if (i == 1)
- outb_p(inb(SMBHSTCNT) | I801_START, SMBHSTCNT);
+ outb_p(inb(SMBHSTCNT(priv)) | I801_START,
+ SMBHSTCNT(priv));
/* We will always wait for a fraction of a second! */
timeout = 0;
do {
msleep(1);
- status = inb_p(SMBHSTSTS);
+ status = inb_p(SMBHSTSTS(priv));
} while ((!(status & SMBHSTSTS_BYTE_DONE))
&& (timeout++ < MAX_TIMEOUT));
- result = i801_check_post(status, timeout > MAX_TIMEOUT);
+ result = i801_check_post(priv, status, timeout > MAX_TIMEOUT);
if (result < 0)
return result;
if (i == 1 && read_write == I2C_SMBUS_READ
&& command != I2C_SMBUS_I2C_BLOCK_DATA) {
- len = inb_p(SMBHSTDAT0);
+ len = inb_p(SMBHSTDAT0(priv));
if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
- dev_err(&I801_dev->dev,
+ dev_err(&priv->pci_dev->dev,
"Illegal SMBus block read size %d\n",
len);
/* Recover */
- while (inb_p(SMBHSTSTS) & SMBHSTSTS_HOST_BUSY)
- outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS);
- outb_p(SMBHSTSTS_INTR, SMBHSTSTS);
+ while (inb_p(SMBHSTSTS(priv)) &
+ SMBHSTSTS_HOST_BUSY)
+ outb_p(SMBHSTSTS_BYTE_DONE,
+ SMBHSTSTS(priv));
+ outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
return -EPROTO;
}
data->block[0] = len;
/* Retrieve/store value in SMBBLKDAT */
if (read_write == I2C_SMBUS_READ)
- data->block[i] = inb_p(SMBBLKDAT);
+ data->block[i] = inb_p(SMBBLKDAT(priv));
if (read_write == I2C_SMBUS_WRITE && i+1 <= len)
- outb_p(data->block[i+1], SMBBLKDAT);
+ outb_p(data->block[i+1], SMBBLKDAT(priv));
/* signals SMBBLKDAT ready */
- outb_p(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR, SMBHSTSTS);
+ outb_p(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR, SMBHSTSTS(priv));
}
return 0;
}
-static int i801_set_block_buffer_mode(void)
+static int i801_set_block_buffer_mode(struct i801_priv *priv)
{
- outb_p(inb_p(SMBAUXCTL) | SMBAUXCTL_E32B, SMBAUXCTL);
- if ((inb_p(SMBAUXCTL) & SMBAUXCTL_E32B) == 0)
+ outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv));
+ if ((inb_p(SMBAUXCTL(priv)) & SMBAUXCTL_E32B) == 0)
return -EIO;
return 0;
}
/* Block transaction function */
-static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
+static int i801_block_transaction(struct i801_priv *priv,
+ union i2c_smbus_data *data, char read_write,
int command, int hwpec)
{
int result = 0;
if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
if (read_write == I2C_SMBUS_WRITE) {
/* set I2C_EN bit in configuration register */
- pci_read_config_byte(I801_dev, SMBHSTCFG, &hostc);
- pci_write_config_byte(I801_dev, SMBHSTCFG,
+ pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc);
+ pci_write_config_byte(priv->pci_dev, SMBHSTCFG,
hostc | SMBHSTCFG_I2C_EN);
- } else if (!(i801_features & FEATURE_I2C_BLOCK_READ)) {
- dev_err(&I801_dev->dev,
+ } else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) {
+ dev_err(&priv->pci_dev->dev,
"I2C block read is unsupported!\n");
return -EOPNOTSUPP;
}
/* Experience has shown that the block buffer can only be used for
SMBus (not I2C) block transactions, even though the datasheet
doesn't mention this limitation. */
- if ((i801_features & FEATURE_BLOCK_BUFFER)
+ if ((priv->features & FEATURE_BLOCK_BUFFER)
&& command != I2C_SMBUS_I2C_BLOCK_DATA
- && i801_set_block_buffer_mode() == 0)
- result = i801_block_transaction_by_block(data, read_write,
- hwpec);
+ && i801_set_block_buffer_mode(priv) == 0)
+ result = i801_block_transaction_by_block(priv, data,
+ read_write, hwpec);
else
- result = i801_block_transaction_byte_by_byte(data, read_write,
+ result = i801_block_transaction_byte_by_byte(priv, data,
+ read_write,
command, hwpec);
if (result == 0 && hwpec)
- i801_wait_hwpec();
+ i801_wait_hwpec(priv);
if (command == I2C_SMBUS_I2C_BLOCK_DATA
&& read_write == I2C_SMBUS_WRITE) {
/* restore saved configuration register value */
- pci_write_config_byte(I801_dev, SMBHSTCFG, hostc);
+ pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc);
}
return result;
}
int hwpec;
int block = 0;
int ret, xact = 0;
+ struct i801_priv *priv = i2c_get_adapdata(adap);
- hwpec = (i801_features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC)
+ hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC)
&& size != I2C_SMBUS_QUICK
&& size != I2C_SMBUS_I2C_BLOCK_DATA;
switch (size) {
case I2C_SMBUS_QUICK:
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
+ SMBHSTADD(priv));
xact = I801_QUICK;
break;
case I2C_SMBUS_BYTE:
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
+ SMBHSTADD(priv));
if (read_write == I2C_SMBUS_WRITE)
- outb_p(command, SMBHSTCMD);
+ outb_p(command, SMBHSTCMD(priv));
xact = I801_BYTE;
break;
case I2C_SMBUS_BYTE_DATA:
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
- outb_p(command, SMBHSTCMD);
+ SMBHSTADD(priv));
+ outb_p(command, SMBHSTCMD(priv));
if (read_write == I2C_SMBUS_WRITE)
- outb_p(data->byte, SMBHSTDAT0);
+ outb_p(data->byte, SMBHSTDAT0(priv));
xact = I801_BYTE_DATA;
break;
case I2C_SMBUS_WORD_DATA:
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
- outb_p(command, SMBHSTCMD);
+ SMBHSTADD(priv));
+ outb_p(command, SMBHSTCMD(priv));
if (read_write == I2C_SMBUS_WRITE) {
- outb_p(data->word & 0xff, SMBHSTDAT0);
- outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
+ outb_p(data->word & 0xff, SMBHSTDAT0(priv));
+ outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv));
}
xact = I801_WORD_DATA;
break;
case I2C_SMBUS_BLOCK_DATA:
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
- outb_p(command, SMBHSTCMD);
+ SMBHSTADD(priv));
+ outb_p(command, SMBHSTCMD(priv));
block = 1;
break;
case I2C_SMBUS_I2C_BLOCK_DATA:
/* NB: page 240 of ICH5 datasheet shows that the R/#W
* bit should be cleared here, even when reading */
- outb_p((addr & 0x7f) << 1, SMBHSTADD);
+ outb_p((addr & 0x7f) << 1, SMBHSTADD(priv));
if (read_write == I2C_SMBUS_READ) {
/* NB: page 240 of ICH5 datasheet also shows
* that DATA1 is the cmd field when reading */
- outb_p(command, SMBHSTDAT1);
+ outb_p(command, SMBHSTDAT1(priv));
} else
- outb_p(command, SMBHSTCMD);
+ outb_p(command, SMBHSTCMD(priv));
block = 1;
break;
default:
- dev_err(&I801_dev->dev, "Unsupported transaction %d\n", size);
+ dev_err(&priv->pci_dev->dev, "Unsupported transaction %d\n",
+ size);
return -EOPNOTSUPP;
}
if (hwpec) /* enable/disable hardware PEC */
- outb_p(inb_p(SMBAUXCTL) | SMBAUXCTL_CRC, SMBAUXCTL);
+ outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_CRC, SMBAUXCTL(priv));
else
- outb_p(inb_p(SMBAUXCTL) & (~SMBAUXCTL_CRC), SMBAUXCTL);
+ outb_p(inb_p(SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC),
+ SMBAUXCTL(priv));
if (block)
- ret = i801_block_transaction(data, read_write, size, hwpec);
+ ret = i801_block_transaction(priv, data, read_write, size,
+ hwpec);
else
- ret = i801_transaction(xact | ENABLE_INT9);
+ ret = i801_transaction(priv, xact | ENABLE_INT9);
/* Some BIOSes don't like it when PEC is enabled at reboot or resume
time, so we forcibly disable it after every transaction. Turn off
E32B for the same reason. */
if (hwpec || block)
- outb_p(inb_p(SMBAUXCTL) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B),
- SMBAUXCTL);
+ outb_p(inb_p(SMBAUXCTL(priv)) &
+ ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
if (block)
return ret;
switch (xact & 0x7f) {
case I801_BYTE: /* Result put in SMBHSTDAT0 */
case I801_BYTE_DATA:
- data->byte = inb_p(SMBHSTDAT0);
+ data->byte = inb_p(SMBHSTDAT0(priv));
break;
case I801_WORD_DATA:
- data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
+ data->word = inb_p(SMBHSTDAT0(priv)) +
+ (inb_p(SMBHSTDAT1(priv)) << 8);
break;
}
return 0;
static u32 i801_func(struct i2c_adapter *adapter)
{
+ struct i801_priv *priv = i2c_get_adapdata(adapter);
+
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK |
- ((i801_features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) |
- ((i801_features & FEATURE_I2C_BLOCK_READ) ?
+ ((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) |
+ ((priv->features & FEATURE_I2C_BLOCK_READ) ?
I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0);
}
.functionality = i801_func,
};
-static struct i2c_adapter i801_adapter = {
- .owner = THIS_MODULE,
- .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
- .algo = &smbus_algorithm,
-};
-
static const struct pci_device_id i801_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_3) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_3) },
{
unsigned char temp;
int err, i;
+ struct i801_priv *priv;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ i2c_set_adapdata(&priv->adapter, priv);
+ priv->adapter.owner = THIS_MODULE;
+ priv->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+ priv->adapter.algo = &smbus_algorithm;
- I801_dev = dev;
- i801_features = 0;
+ priv->pci_dev = dev;
switch (dev->device) {
default:
- i801_features |= FEATURE_I2C_BLOCK_READ;
+ priv->features |= FEATURE_I2C_BLOCK_READ;
/* fall through */
case PCI_DEVICE_ID_INTEL_82801DB_3:
- i801_features |= FEATURE_SMBUS_PEC;
- i801_features |= FEATURE_BLOCK_BUFFER;
+ priv->features |= FEATURE_SMBUS_PEC;
+ priv->features |= FEATURE_BLOCK_BUFFER;
/* fall through */
case PCI_DEVICE_ID_INTEL_82801CA_3:
case PCI_DEVICE_ID_INTEL_82801BA_2:
/* Disable features on user request */
for (i = 0; i < ARRAY_SIZE(i801_feature_names); i++) {
- if (i801_features & disable_features & (1 << i))
+ if (priv->features & disable_features & (1 << i))
dev_notice(&dev->dev, "%s disabled by user\n",
i801_feature_names[i]);
}
- i801_features &= ~disable_features;
+ priv->features &= ~disable_features;
err = pci_enable_device(dev);
if (err) {
}
/* Determine the address of the SMBus area */
- i801_smba = pci_resource_start(dev, SMBBAR);
- if (!i801_smba) {
+ priv->smba = pci_resource_start(dev, SMBBAR);
+ if (!priv->smba) {
dev_err(&dev->dev, "SMBus base address uninitialized, "
"upgrade BIOS\n");
err = -ENODEV;
err = pci_request_region(dev, SMBBAR, i801_driver.name);
if (err) {
dev_err(&dev->dev, "Failed to request SMBus region "
- "0x%lx-0x%Lx\n", i801_smba,
+ "0x%lx-0x%Lx\n", priv->smba,
(unsigned long long)pci_resource_end(dev, SMBBAR));
goto exit;
}
- pci_read_config_byte(I801_dev, SMBHSTCFG, &temp);
- i801_original_hstcfg = temp;
+ pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &temp);
+ priv->original_hstcfg = temp;
temp &= ~SMBHSTCFG_I2C_EN; /* SMBus timing */
if (!(temp & SMBHSTCFG_HST_EN)) {
dev_info(&dev->dev, "Enabling SMBus device\n");
temp |= SMBHSTCFG_HST_EN;
}
- pci_write_config_byte(I801_dev, SMBHSTCFG, temp);
+ pci_write_config_byte(priv->pci_dev, SMBHSTCFG, temp);
if (temp & SMBHSTCFG_SMB_SMI_EN)
dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n");
dev_dbg(&dev->dev, "SMBus using PCI Interrupt\n");
/* Clear special mode bits */
- if (i801_features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER))
- outb_p(inb_p(SMBAUXCTL) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B),
- SMBAUXCTL);
+ if (priv->features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER))
+ outb_p(inb_p(SMBAUXCTL(priv)) &
+ ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
/* set up the sysfs linkage to our parent device */
- i801_adapter.dev.parent = &dev->dev;
+ priv->adapter.dev.parent = &dev->dev;
/* Retry up to 3 times on lost arbitration */
- i801_adapter.retries = 3;
+ priv->adapter.retries = 3;
- snprintf(i801_adapter.name, sizeof(i801_adapter.name),
- "SMBus I801 adapter at %04lx", i801_smba);
- err = i2c_add_adapter(&i801_adapter);
+ snprintf(priv->adapter.name, sizeof(priv->adapter.name),
+ "SMBus I801 adapter at %04lx", priv->smba);
+ err = i2c_add_adapter(&priv->adapter);
if (err) {
dev_err(&dev->dev, "Failed to add SMBus adapter\n");
goto exit_release;
memset(&info, 0, sizeof(struct i2c_board_info));
info.addr = apanel_addr;
strlcpy(info.type, "fujitsu_apanel", I2C_NAME_SIZE);
- i2c_new_device(&i801_adapter, &info);
+ i2c_new_device(&priv->adapter, &info);
}
#endif
#if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE
if (dmi_name_in_vendors("FUJITSU"))
- dmi_walk(dmi_check_onboard_devices, &i801_adapter);
+ dmi_walk(dmi_check_onboard_devices, &priv->adapter);
#endif
+ pci_set_drvdata(dev, priv);
return 0;
exit_release:
pci_release_region(dev, SMBBAR);
exit:
+ kfree(priv);
return err;
}
static void __devexit i801_remove(struct pci_dev *dev)
{
- i2c_del_adapter(&i801_adapter);
- pci_write_config_byte(I801_dev, SMBHSTCFG, i801_original_hstcfg);
+ struct i801_priv *priv = pci_get_drvdata(dev);
+
+ i2c_del_adapter(&priv->adapter);
+ pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
pci_release_region(dev, SMBBAR);
+ pci_set_drvdata(dev, NULL);
+ kfree(priv);
/*
* do not call pci_disable_device(dev) since it can cause hard hangs on
* some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010)
#ifdef CONFIG_PM
static int i801_suspend(struct pci_dev *dev, pm_message_t mesg)
{
+ struct i801_priv *priv = pci_get_drvdata(dev);
+
pci_save_state(dev);
- pci_write_config_byte(dev, SMBHSTCFG, i801_original_hstcfg);
+ pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
pci_set_power_state(dev, pci_choose_state(dev, mesg));
return 0;
}
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff