drivers/rtc/rtc-sa1100.c: move clock enable/disable to probe/remove
authorChao Xie <chao.xie@marvell.com>
Fri, 22 Feb 2013 00:45:17 +0000 (16:45 -0800)
committerLinus Torvalds <torvalds@linux-foundation.org>
Fri, 22 Feb 2013 01:22:28 +0000 (17:22 -0800)
The original sa1100_rtc_open/sa1100_rtc_release will be called when the
/dev/rtc0 is opened or closed.  In fact, these two functions will
enable/disable the clock.  Disabling clock will make rtc not work.  So
only enable/disable clock when probe/remove the device.

Signed-off-by: Chao Xie <chao.xie@marvell.com>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Leo Song <liangs@marvell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/rtc/rtc-sa1100.c

index df9180e80e3a5d50e0a2cb20c3eada54153fbbb2..5ec5036df0bce39c535a87a5fed23c0b1e0e9ede 100644 (file)
@@ -108,9 +108,6 @@ static int sa1100_rtc_open(struct device *dev)
        struct rtc_device *rtc = info->rtc;
        int ret;
 
-       ret = clk_prepare_enable(info->clk);
-       if (ret)
-               goto fail_clk;
        ret = request_irq(info->irq_1hz, sa1100_rtc_interrupt, 0, "rtc 1Hz", dev);
        if (ret) {
                dev_err(dev, "IRQ %d already in use.\n", info->irq_1hz);
@@ -130,7 +127,6 @@ static int sa1100_rtc_open(struct device *dev)
        free_irq(info->irq_1hz, dev);
  fail_ui:
        clk_disable_unprepare(info->clk);
- fail_clk:
        return ret;
 }
 
@@ -144,7 +140,6 @@ static void sa1100_rtc_release(struct device *dev)
 
        free_irq(info->irq_alarm, dev);
        free_irq(info->irq_1hz, dev);
-       clk_disable_unprepare(info->clk);
 }
 
 static int sa1100_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
@@ -253,6 +248,9 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
        spin_lock_init(&info->lock);
        platform_set_drvdata(pdev, info);
 
+       ret = clk_prepare_enable(info->clk);
+       if (ret)
+               goto err_enable_clk;
        /*
         * According to the manual we should be able to let RTTR be zero
         * and then a default diviser for a 32.768KHz clock is used.
@@ -305,6 +303,8 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
 
        return 0;
 err_dev:
+       clk_disable_unprepare(info->clk);
+err_enable_clk:
        platform_set_drvdata(pdev, NULL);
        clk_put(info->clk);
 err_clk:
@@ -318,6 +318,7 @@ static int sa1100_rtc_remove(struct platform_device *pdev)
 
        if (info) {
                rtc_device_unregister(info->rtc);
+               clk_disable_unprepare(info->clk);
                clk_put(info->clk);
                platform_set_drvdata(pdev, NULL);
                kfree(info);